Pakavimo ir paletavimo linija

HOMAG

Būklė: nepatikrintas (naudotas), Gamybos metai: 2005, Funkcionalumas: nepatikrintas, ruošinio aukštis (maks.): 40 mm, briaunos storis (maks.): 3 mm, X ašies padavimo greitis: 35 m/min, sukimosi greitis (maks.): 12 000 aps./min, įrankių magazino lizdų skaičius: 48, TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 40 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm Feed speed max.: 35 m/min PROCESSING UNITS Pre-milling unit Automatic engagement 48 tool positions End trimming unit 2 motors Fine trimming unit 1 2 motors Motor output: 0.55 kW Speed: 12,000 rpm Fine trimming unit 2 2 motors Motor output: 0.55 kW Speed: 12,000 rpm Edge scraping unit Glue joint scraping unit Polishing unit 2 motors Spraying device Kjdpfx Aoyqybuegfedi MACHINE DETAILS Control system: PC 22 EQUIPMENT Pressure application with rubber band Panel guides with NC positioning Glue pot for EVA hot-melt adhesive Pre-melting device for EVA hot-melt adhesive Laser system (Model: LaserTec) Roller set for pressing the edge with 5 pressure rollers Units mounted on protective covers CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved"), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 5321

Gamybos metai: 2025, būklė: naujas, Automatischer Palettenspender ist das Rückgrat Ihrer Automatisierungsprozesse. Mit bis zu 10 Europaletten (1200x800 oder 1200x1200 mm) beladen, entfällt das manuelle Vorbereiten einzelner Paletten, wodurch Zeit gespart und die körperliche Belastung der Mitarbeiter reduziert wird. Stattdessen gibt das Gerät per Knopfdruck oder nach einem vordefinierten Algorithmus Paletten auf ein motorisiertes Rollenförderband frei, welches diese zur Weiterverarbeitung transportiert. Der PD-10 kann mit verschiedenen Palettierlösungen kombiniert werden. Kdjdpfehbg Uxsx Agfei Für bis zu 10 Europaletten geeignet Beladung per Gabelstapler Reduziert körperliche Belastung Steigert die Effizienz

Būklė: nepatikrintas (naudotas), Gamybos metai: 2007, Funkcionalumas: nepatikrintas, darbinis plotis: 1 935 mm, ašies skaičius: 40, plokštės aukštis: 350 mm, darbinis ilgis: 6 200 mm, ašių skaičius: 4, TECHNICAL DETAILS X-axis working range: 6,200 mm Y-axis working range: 1,935 mm Maximum panel thickness: 350 mm Number of edge band magazines: 3 Number of tools in the tool magazine: 22 (located at the rear of the machine) Drilling Spindles Spindles for vertical drilling: 28 Spindles for horizontal drilling in X direction: 4 Spindles for horizontal drilling in Y direction: 8 Total number of vertical + horizontal spindles: 40 Milling Spindles Number of controlled axes: 4 Motor power: 10.5 kW Automatic tool changer MACHINE DETAILS Total connected load: 31 kW EQUIPMENT Vacuum cups for securing the workpiece Kdsdpfx Ageyqx U Hofei Safety mats at the front Vacuum pump Chip conveyor Fixed grooving unit for producing grooves in X direction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External reference: 8105

Būklė: nepatikrintas (naudotas), Gamybos metai: 2005, Funkcionalumas: nepatikrintas, galia: 19 kW (25,83 AG), X ašies eiga: 4 175 mm, Y ašies eiga: 1 730 mm, ašies skaičius: 20, Įrankių bokštelio 1 įrankių stočių skaičius: 18, TECHNICAL DETAILS Kedpfxoyttf Sj Agfsdi Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction traverses: 8 Number of tool magazine positions: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling in X direction: 2 Number of spindles for horizontal drilling in Y direction: 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Total installed power: 19 kW Control model: PC85 EQUIPMENT CE marking Front safety cover Note: Cones, milling cutters and aggregates are not included in the scope of delivery. Safety guards are supplied as available (left side only). The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6906

Būklė: naudotas, Presssystem: Kontinuierlich / Kalander Hauptlieferanten: Bison / Berstorff Ksdpfx Agsul H Nmefodi Konstruktive Leistung: 160 m³/Tag Erreichte Kapazität ca.: 200 m³/Tag Effektive Betriebszeit: 23 Std./Tag Referenzdicke: 3,2 mm Max. Bruttobrettbreite: 2500 mm Max. Nettobrettlänge: 2440 mm Max. Nettobrettbreite: unbegrenzt Min. Nettobrettbreite: 1220 mm (teilbar) Min. Brettdicke: 2,0 mm Max. Brettdicke: 10 mm Elektrisches System: 380 V, 50 Hz Baujahr: 1985 Hauptmodernisierungen: 2007-2009, 2016 Betrieb bis: Mai 2018

Būklė: nepatikrintas (naudotas), Gamybos metai: 2008, Funkcionalumas: nepatikrintas, X ašies eiga: 4 175 mm, Y ašies eiga: 1 550 mm, ruošinio aukštis (maks.): 40 mm, ašies skaičius: 30, važiuojamoji greitis (maks.): 80 000 mm/min, TECHNICAL DETAILS X-Axis Travel: 4,175 mm Y-Axis Travel: 1,550 mm X-Axis Traverse Speed: 80 m/min Y-Axis Traverse Speed: 80 m/min Z-Axis Traverse Speed: 30 m/min Kedpfx Asyttcwogfodi Max. Workpiece Height: 40 mm Number of Suction Traverses: 8 Spindles Number of Vertical Drilling Spindles: 20 Number of Horizontal Drilling Spindles (X-direction): 10 Total Number of Spindles: 30 Milling Unit Number of Controlled Axes: 4 + Flex5 Motor Power: 15 kW Automatic Tool Changer Liquid-cooled Saw Unit Tool Magazine 1 Number of Slots: 18 Tool Magazine 2 Number of Slots: 10 EQUIPMENT NC positioning of suction units Vacuum pump PowerControl P85 control system WoodWop 5.0 machine programming software Note: Cones and cutters are not included in the scope of delivery. The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 7350

Būklė: nepatikrintas (naudotas), Gamybos metai: 2008, Funkcionalumas: nepatikrintas, briaunos storis (maks.): 3 mm, X ašies padavimo greitis: 25 m/min, sukimosi greitis (maks.): 12 000 aps./min, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Kdodpfxeytr Hbo Agfsi Edge Processing Unit 1 Unit: Corner Processing Model: WK13 No. of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 2 Unit: Top Router No. of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Unit 3 Unit: Multi-function Model: FK13 No. of motors: 2 automatic tool change with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Unit 4 Unit: Top Router Model: UF11 No. of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Unit 5 Unit: Edge Scraper Model: MN21 with NC positioning Edge Processing Unit 6 Unit: Glue Scraper Model: FA11 Edge Processing Unit 7 Unit: Brush No. of motors: 2 Motor power: 0.25 kW Edge Processing Unit 8 Unit: Brush No. of motors: 2 Motor power: 0.25 kW Total installed power: 35 kW EQUIPMENT Spray unit Software for machine programming: PowerControl PC22 CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the place of destination. External Reference: 6216

Būklė: geras (naudotas), Traypacker / wrap-around-verpakker Trays en wrap-around dozen Kdjdpfjfxypisx Agfsi minimale verpakkingsafmeting L x B x H = 190 x 140 x 80 mm maximale verpakkingsafmeting L x B x H = 460 x 350 x 250 mm 4-banen machine. Hotmelt-installatie geheel gereviseerd in 2018, Siemens S7 PLC-besturing, eenvoudig formaatwissel. In huidige staat of Aangepast aan klantwens.

Būklė: labai geros būklės (naudotas), PC valdymas Power Control PC85T Programinė įranga WoodWOP + TOPDRILL Nr. 2 pravažiuojančios motorizuotos konvejerinės juostos Nr. 2 horizontalios gręžimo suportai (skaitmeninis ašių padėties rodmuo) Nr. 1 gręžimo agregatas kiekvienam horizontaliam gręžimo suportui (1 x 1,5 kW) Nr. 21 velenas kiekvienam horizontaliam gręžimo agregatui Maks. darbinis plotis (mm) 2500 Min. darbinis plotis (mm) 250 Kedpfsyv Ev Aox Agfodi Nr. 4 apatiniai vertikalūs gręžimo suportai (skaitmeninis ašių padėties rodmuo) Nr. 2 gręžimo agregatai kiekvienam apatiniam vertikaliam gręžimo suportui (2 x 1,5 kW) Nr. 4 viršutiniai vertikalūs ruošinio spaustuvai Drožlių pašalinimo juosta Bendroji prijungimo galia (kW) 35

Būklė: naudotas, Gamybos metai: 2007, bendras aukštis: 1 200 mm, bendras ilgis: 3 600 mm, bendras plotis: 1 480 mm, - Machine available from: 2025-12-15 - Year of manufacture: 2007 - Documentation available: Yes - Type of documentation: Technical data, electrical schematics, user manual, operating system - Language: NL (Dutch) - CE marking present: Yes - CE certificate available: No - Serial number: - Number of units [pcs]: 8 - 1st unit type: - Tools included: Yes Kdsdpfsx Ei Syjx Agfei - 3rd unit type: - Tools included: Yes - 4th unit type: - Tools included: Yes - 5th unit type: - Tools included: Yes - 6th unit type: - Tools included: Yes - 7th unit type: - Tools included: Yes - Voltage [V]: 400 - Current consumption [A]: 50 - Transport dimensions: 3600mm x 1480mm x 1200mm (L x W x H) - Shipping units [pcs]: 4 Financial Information VAT: The indicated price is excluding VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in available at any time for all items from the industrial sector Yorick Diebels

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Machining center Kdedpfx Ageh E Sghjfei Manufacturer: Weeke Model: BHX 500 Year of manufacture: 2008 Working range X: 2,500 mm Working range Y: 1,300 mm Working range Z: 4 - 80 mm Number of routing units: 2 Number of drilling units: 2 Vertical drilling spindles: 72 Horizontal drilling spindles X: 16 Horizontal drilling spindles Y: 4 Grooving saw: Swivels 90° X-axis speed: 130 m/min Y-axis speed: 80 m/min Z1-axis speed: 50 m/min Z2-axis speed: 27 m/min Spindle speed: 18,000 rpm Dismantled - available immediately

Būklė: naudotas, Gamybos metai: 2018, bendras aukštis: 1 650 mm, bendras ilgis: 4 400 mm, bendras plotis: 1 000 mm, Price: Upon request - Special features: - Description: The machine currently has a fault that needs to be rectified - Year of manufacture: 2018 - Documentation available: No - CE marking present: Yes - CE certificate available: No - Serial number: - Number of units [pcs]: 9 - 1st unit type: - Tools included: Yes - 3rd unit type: - Tools included: Yes - 4th unit type: Kdjdpfxoyvf Nbs Agfsi - Tools included: Yes - 5th unit type: - Tools included: Yes - 6th unit type: - Tools included: Yes - 7th unit type: - Tools included: Yes - 8th unit type: - Tools included: Yes - 9th unit type: - Tools included: Yes - Voltage [V]: 400 - Power consumption [A]: 10.3 - Fuse [A]: 16 - Transport dimensions: 4400mm x 1000mm x 1650mm (L x W x H) - Transport packages [pcs]: 1 Financial Information VAT: The indicated price is exclusive of VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial sector equipment Yorick Diebels

Būklė: labai geros būklės (naudotas), 3-axis (X-Y-Z) CNC-controlled "FLEXIBLE" MACHINING CENTER Kjdoyu S I Iepfx Agfedi Movable platen (workpiece), stationary working head - horizontal platen (workpiece) Control unit PowerControl PC86 powerTouch (woodWOP software) Working head safety enclosure No. 2 clamp locks for workpiece holding within the working area WEEKE pre-positioning unit – for faster positioning of workpieces in machines with gripper clamps. Infeed work support table – outfeed table (with powered conveyor belt) Equipped with automatic panel pusher Minimum workpiece dimensions (X-Y-Z): 200 x 70 x 8 mm (2 x 4 mm) Maximum workpiece dimensions (X-Y-Z): 3000 x 1000 (option 1300) x 80 mm (2 x 40 mm) Simultaneous machining of two workpieces (in Z-axis) Separate electrical and control cabinets PROCESSING UNITS (TOP): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 kW No. 42 independent vertical drilling spindles (drilling head power 2.3 kW) No. 10 independent horizontal drilling spindles (8 in X + 2 in Y) No. 1 grooving saw unit (X-Y direction, 90° swiveling), diameter 125 mm No. 1 vertical main spindle (milling aggregate) ETP (power of vertical main spindle 6 kW) PROCESSING UNITS (BOTTOM): 2V42, 2H8X/2Y, N2 X-Y90, F2-ETP-6 kW No. 42 independent vertical drilling spindles (drilling head power 2.3 kW) No. 10 independent horizontal drilling spindles (8 in X + 2 in Y) No. 1 grooving saw unit (X-Y direction, 90° swiveling), diameter 125 mm No. 1 vertical main spindle (milling aggregate) ETP (power of vertical main spindle 6 kW)

Būklė: naujas, Kompletna linia do produkcji palet. Nr/Poz Nr części/Nazwa/Ilość 1/OKKR-100/Magazyn Opti-Cutter/L=3000mm/1 2/RON120/Karuzela podajnika klocków/1 3/OM-1500EL/Maszyna do nóg/1 Kdsdpfx Agewduudefoi 4/LP-OM/System pozycjonowania nóg/1 5/D-1000EL/Maszyna do pokładu/1 6/KTR-1006/Przenośnik łańcuchowy L=6000/1 7/GRG/Robot portalowy z mechanicznym chwytakiem/1 8/SMS-1000EL/Maszyna montażowa/1 9/HKR/Automatyczna maszyna do przycinania narożników/1 10/KTR-1004/Przenośnik łańcuchowy L=4000/1 11/ROB-G/Robot z mechanicznym chwytakiem/1 Średnia wydajność: 1500 palet/8 godzin (paleta 800x1200 mm, maks. 6 desek pokładowych) Maksymalna wydajność: 1900 palet/8 godzin (paleta 800x1200 mm, maks. 6 desek pokładowych)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, Specifikacija: Pjovimo ilgis: 4300 mm Pjovimo plotis: 4300 mm Pjūklo disko išsikišimas: 80 mm Valdymo ekranas dešinėje pusėje Stalo paviršius visiškai oro pagalvėje Programuojamos tvoros judėjimo greitis pirmyn: 25 m/min Programuojamos tvoros judėjimo greitis atgal: 90 m/min Standartiniai spaustuvai: 225, 325, 475, 775, 1075, 1825, 3425 mm "Power Concept" – leidžia vienu metu pjauti kelias skirtingo ilgio ruošinių juostas, padidinant našumą iki 40%. Spaudimo sijos aukščio kontrolė Pjūklo vežimo greitis: 130 m/min Pagrindinio pjūklo variklis: 11 kW su pneumatiniu pakėlimu Įpjovimo pjūklo mazgas: 1,5 kW su pneumatiniu pakėlimu Elektroninis įpjovimo pjūklo reguliavimas iš valdymo ekrano 4 oro pagalvės stalai – 2160 x 650 mm Lipdukų spausdintuvas 400V 50Hz Valdymo jutiklinis ekranas Kedpfx Agsyuw Umofsdi Duomenų perdavimas per tinklą + USB prievadą CE Eco Plus technologijos – energijos sunaudojimas sumažinamas iki 20%.