Hidraulinė kabelio gervė su el. vožtuvas

Holzhäuer HAW4000-EV

Sąlyga: naujas, Hydraulic Winch HAW4000 without Valve for Wheel Loaders, Excavators, Cranes, Mini Excavators, Tractors, Vineyard Tractors, Landscaping, Building Construction, Civil Engineering, and many other applications. Duodpofn Tviefx Ab Sol The HAW4000 hydraulic attachment winch simplifies a wide range of tasks. Maximum rope capacity at 4,000 kg pulling force: 60 m with 10 mm wire rope. Maximum rope capacity at 3,000 kg pulling force: 90 m with 8 mm wire rope. Maximum rope capacity at 1,700 kg pulling force: 150 m with 6 mm wire rope. Maximum rope capacity at 3,500 kg pulling force: 150 m with 6 mm synthetic rope. Maximum rope capacity at 2,000 kg pulling force: 220 m with 5 mm synthetic rope. Standard configuration: 50 m of 10 mm wire rope. ⦁ Suitable for vineyard, agriculture, forestry, and landscaping ⦁ For building, civil, and road construction ⦁ Pulling out rootstocks and trees ⦁ As an attachment winch for timber cranes and excavators ⦁ As a winch for tractors, work machines, and grape harvesters Sturdy steel construction with three-sided mounting options (left, right, rear) using M16 threaded holes. This allows a wide range of mounting possibilities. (Threads are cut and painted. For corrosion protection, please recut before use.) Large, greaseable cable drum for extended wire rope service life. ⦁ Maximum working pressure: 210 bar peak ⦁ Oil flow up to 200 l/min, briefly up to max. 240 l/min ⦁ Maximum pulling force: 4,000 kg ⦁ Rope speed: 140 m/min with 200 l/min oil flow ⦁ Weight: 170 kg ⦁ Color: red The winch can be installed in different orientations. A hydraulic brake is available as an option. Depending on your required pulling speeds and forces, we can offer various configurations. Feel free to contact us for advice. Dimensions: ⦁ Length: 850 mm ⦁ Length with rope guide: 970 mm ⦁ Front width: 200 mm ⦁ Rear width: 300 mm ⦁ Bearing width: +50 mm ⦁ Motor width: +300 mm ⦁ Total width: 650 mm ⦁ Height: 420 mm

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, virvės ilgis: 30 000 mm, virvės greitis: 47 000 mm/min, mašinos/transporto priemonės numeris: HAW1700-EV-Funk, Hydraulic winch for log splitters, cranes, mini excavators, tractors, vineyard equipment, horticulture, and many other applications. The hydraulic attachment winch makes numerous tasks easier: - Pull firewood to the log splitter and set it up - Load logs onto trailers - Extract roots and trees - Attach as an auxiliary winch to forestry cranes and small excavators - Use as a winch for small tractors and narrow-track tractors Rugged steel construction with three-sided mounting capability (left, right, rear) featuring 12 threaded holes, providing extensive options for securing the winch (threads are pre-cut and painted; re-tapping is required prior to use to remove rust protection). Equipped with a 20 m long, 6 mm thick steel cable. Large cable drum for extended cable life. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), allowing you to select the desired speed and pulling power. Maximum operating pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Continuous torque: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min with 60 L/min hydraulic oil flow Color: red Dimensions: Length: 500 mm Length with pendulum: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: +30 mm Motor width: +200 mm Height: 250 mm The winch is available for bolting or welding installation. This version includes an electric hydraulic valve, radio remote control, and hydraulic hoses to the motor. Djdpfx Absdf Ufpj Seul Article number: HAW1700-EV-Funk

Sąlyga: geras (naudotas), Well-maintained horizontal sawmill. Passage width: 1000 mm. Stroke: 800 mm. Feed electronically adjustable. Clamping carriage approx. 7.5 m long with 5 hydraulic clamping units. Can still be inspected in operation. Dujdpfx Abounhl Ue Sol

Sąlyga: naudotas, Gamybos metai: 2022, veikimo valandos: 620 h,

Sąlyga: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, bendras svoris: 1 240 kg, kuro tipas: dyzelinas, bakelio talpa: 135 l, spalva: balta, išėjimo srovė: 130 A, išėjimo įtampa: 400 V, išėjimo dažnis: 50 Hz, išėjimo srovės tipas: trifazis, nominali galia: 34 kW (46,23 AG), nuolatinė galia: 30 kW (40,79 AG), bendras ilgis: 2 200 mm, bendras plotis: 950 mm, bendras aukštis: 1 230 mm, sukimosi greitis (maks.): 1 500 aps./min, variklių gamintojas: Deutz, Cummins, Ricardo, aušinimo tipas: vanduo, įvesties srovės tipas: trifazis, Three-phase stationary generator set Proton ZPP 30R (30kW - 34kW) in a compact, weather-resistant and additionally sound-insulated enclosure. The genset features an external Automatic Transfer Switch (ATS/Autostart) system as well as many other functions, detailed further in the description. • Model – Proton ZPP 30R SZR • Maximum power output – 34,000 Watts (34kW / 40 kVA) • Rated power – 30,000 Watts (30kW / 36 kVA) • Ready for operation – Yes • Type – Industrial generator set • Condition – Brand new • Manufacturer – Proton • Generator set type – Three-phase • VAT invoice 23% • Year of manufacture – 2024 • Warranty – 36 months ⊳ ENGINE: Engine model – Ricardo MN4100ZDS Fuel type – Diesel Fuel consumption: - 6.5 liters per hour (at 75% load) - 5.0 liters per hour (at 50% load) Engine configuration – Inline (R4) Displacement – 4100 cc Direct injection Lubrication system – Forced lubrication with oil pump ⊳ ALTERNATOR: 100% copper windings AVR voltage stabilizer – Yes Alternator model – Proton 184H Rated output at 400V – 30,000 Watts (30kW / 36 kVA) Maximum output at 400V (up to 15 min) – 34,000 Watts (34kW / 40 kVA) Rated current (400V) – 140.0 A Circuit protection – C16, C32, main – 100A Frequency – 50 Hz Alternator construction – Synchronous ⊳ ENCLOSURE: Sound-insulated housing Weatherproof construction Three-phase and single-phase sockets Duedpfxotpvdts Ab Sjl Fuel tank capacity – 135 liters Operating time on full tank (average) – 20 hours Transport kit – Forklift pockets and HDS crane lifting lugs Dimensions – 220 x 95 x 123 cm Gross weight – 1240 kg ⊳ FEATURES: Voltage stabilizer (AVR) – Stamford SX460 (2%) - Electronic voltage stabilization under variable loads - Electronic frequency stabilization Automatic ATS operation (Automatic Transfer Switch) Overload and thermal protection Oil pressure, oil level, and coolant level sensors Glow plugs Oil pan heater Coolant heater Battery – 2 units of 40Ah Automatic battery charger ⊳ CONTROLLER: Controller model – Comap InteliLite 4 AMF 20 Engine hours counter Ammeter Voltmeter Integrated PLC logic and PLC editor Overload protection CAN module expansion SCADA system integration Additional outputs – for 4G, Ethernet, RS232/485 connections Remote control and monitoring via GPRS – Optional Communication: Modbus, Ethernet – Optional Why choose us? We are a company specializing exclusively in generator sets, operating in this industry for over 17 years, consistently striving to ensure our products offer top quality and maximum reliability. During this time, we have provided solutions to over 10,000 clients across Poland, even in its most remote regions. We carefully select our genset component suppliers, ensuring they are leaders in their respective industries. We offer a wide range of generator sets from 6 to 300kW, equipped with various engines including British Ricardo, American Cummins, or German Deutz, and we provide custom configurations tailored to specific customer requirements.

Sąlyga: geras (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, Parduodamas K+G Wetter WW-130 mėsos malūnas, 1999 m. Mėsos sraigtas su naujais guoliais, 2 greičių. Variklio galia 14 x 18,5 kW, 380V. Piltuvėlis apie 280L. Žiūrėkite nuotraukas. 5 dalių pjovimo sistema, diskai nauji. Su integruotu tiekimu 200L standartiniams vežimėliams. Djdpjxfvr Rsfx Ab Seul Daugiau informacijos pagal užklausą. Apmokėjimas grynaisiais arba išankstinis. Parduodama tik įmonėms, be garantijos ar atsakomybės.

Sąlyga: labai geros būklės (naudotas), SINGLE-SIDED FLEXIBLE EDGE BANDING MACHINE INSERT FOR LOT 1 Edge thickness in rolls (min/max) mm 0.3 - 3 Panel thickness (min/max) mm 8 - 60 Control ICOS open Feed speed m/min (adjustable) 7-35 Duedpfoifnzdjx Ab Sel Top pressure belt driven, spraying unit (for liquid anti-adhesive) Adjustable stop ruler CNC controlled. Panel infeed system A2 / 30 Jointing milling unit with CNC-controlled 75.34 (2 x 6.6 kW) Gluing unit (P.U.R. glue + pre-melter) 2 - VTG 3-48 + 286.205 Edge pressure zone. Edge height adjustment – CNC controlled. Edge magazine for rolls (compartment no.) 48 End trimming unit 08.42 / 30 / B (0.66 kW x 2) (PNEU 0°-25°) 30 m / min Pre-milling unit 08.0555 (1 kW x 2) Multi-profile milling unit (CNC controlled) 08.0587 (0.66 kW x 2) 4 PROFILES Sprayer unit (for sliding fluid) Contour milling unit (for fine milling) CNC controlled KFA x30 (0.5 kW x 1) 30 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 PROFILES) Flat scraper unit 08.521 (CNC controlled) Sprayer unit (for polishing fluid) Buffing unit 08.617 (0.18 kW x 4) No. 3 Universal milling units (CNC controlled) for grooving/rebating and profiling 08.190 (4.5 kW x 2 + 6.6 kW x 1)

Sąlyga: labai geros būklės (naudotas), ONE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips (min/max) mm: 0.8 / 20 Panel thickness (min/max) mm: 8 / 60 Control: ICOS Open Compact Djdpfxeidqphj Ab Soul Feed speed m/min (adjustable): 6 - 30 Top pressure: belt-driven Adjustable guide fence: CNC-controlled Jointing unit with CNC-controlled 08.376 (Kw 4.5 x 2) Lamps for heating the workpiece edge Gluing unit (Hot Melt + Pre-melter) 283.1513 + 283.201 Edge pressure zone Edge magazine for rolls (compartments No.): 1 End trimming unit 08.42 (Kw 0.66 x 2) max 30 m/min, 0°-25° Milling unit 08.055 (Kw 1.85 x 2) 0°-30° Sprayer unit (for sliding fluid) Contour milling unit (for fine milling) CNC-controlled 08.348 (KW 0.66 x 2) 4 profiles Profile scraping unit 08.516 (4 profiles) Flat scraping unit 08.50 Sprayer unit (for polishing fluid) Buffing unit 08.612-2 (Kw 0.25 x 2) Universal milling unit for grooving, rebating, and profiling 08.183 (Kw 3 x 1)

Sąlyga: naudotas, Gamybos metai: 2010, veikimo valandos: 100 000 h, Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 50 kg, darbinis plotis: 1 400 mm, siurbimo galia: 50 000 m³/val, įvesties srovės tipas: trifazis, bendras aukštis: 2 800 mm, bendras ilgis: 65 000 mm, bendras plotis: 2 700 mm, galia: 365 kW (496,26 AG), įėjimo dažnis: 50 Hz, įėjimo srovė: 930 A, darbinis slėgis: 6 juosta, ruošinio plotis (maks.): 1 250 mm, Pilna lakoavimo linija. Dėl išsamesnės informacijos prašome susisiekti per portalą. Dusdpfx Abov Tbgyo Ssl

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, pjovimo plotis (maks.): 1 225 mm, Įranga: kabina, STATIONARY SAW WITH CABIN (optional enclosed) Technical specifications: Duedpfx Absvr Tdhj Sjl - Main motor 55 kW with frequency converter - Max. cutting width: 600 mm - Max. workpiece height: 1000 mm - Main wheels diameter: 1200 mm (Model: WRAVOR WRC 1225 AC) - Main wheels: cast, width 125 mm - 11 kW electric motor for saw blade up/down movement - Main floor-mounted columns – structure on which the saw head moves up and down using a special sliding plastic - 1 hydraulic unit, 16 litres, with 4 kW pump - Automatic hydraulic blade tensioning - Hiwin linear movable blade guide (right side) and fixed blade guide (left side) - Extra valve for roller - Blade guide pressure - 2 magnetic sensors for blade deviation alert - 1 piece PV 40 blade – length 8685 mm x 1.2 mm x 150 mm - Sawdust outlet diameter – discharge port diameter: 200 mm - Electrical cabinet on machine to connect all cables to the saw - Mini control panel for basic saw functions - Centralised electric spindle/worm screw lubrication - Centralised oil lubrication system - x Cameras - SCHNEIDER control system and WRAVOR program: PLC with 1 joystick