Suvirinimo stalas

HISWeld HIS28V33015

Sąlyga: naujas, Gamybos metai: 2025, keliamoji galia: 2 000 kg, Protec KT 2000 HV, hydraulically height-adjustable Load capacity: 2,000 kg Handheld remote control with digital display Dual foot pedal control Height approx. min. 800 mm tilted to center, max. height 1,400 mm Min. height horizontal: 1,000 mm Faceplate diameter: 1,200 mm Minimum tilt angle: 135° Ffjdpfoncfvhsx Ab Sjt Speed: 0.05 to 0.9 rpm Motor power: 3 kW

Sąlyga: naujas, Quantity: 70 items Weight: 90 kg Condition: New Hole diameter: 28 mm WMT Set 7: 70-piece, 28mm system, consisting of: Fodswth N Tspfx Ab Seft 3x Pipe Screw Clamp D28 90° – Art. No. 4028397 3x Pipe Screw Clamp D28 180° – Art. No. 4028396 3x Pipe Screw Clamp D28 45° – Art. No. 4028398 3x Pipe Screw Clamp D28 300x150 – Art. No. 4028399 3x Pipe Screw Clamp D28 300x200 – Art. No. 4028400 15x Ball Lock Pin D28x50 – Art. No. 4027663 10x Locking Pin D28x80 – Art. No. 4028876 4x Universal Stop D28 100x50x25 mm – Art. No. 4028469 4x Universal Stop D28 150x50x25 mm – Art. No. 4028470 4x Universal Stop D28 225x50x25 mm – Art. No. 4027657 2x Universal Stop D28 300x50x25 mm – Art. No. 4027659 2x Clamp Stop Angle D28 75x50x75x25 mm – Art. No. 4028657 2x Clamp Stop Angle D28 175x50x75x25 mm – Art. No. 4028658 2x Clamp Stop Angle D28 175x50x175x25 mm – Art. No. 4028649 2x Clamp Stop Angle D28 175x50x75x25 mm – Art. No. 4028652 2x Clamp Stop Angle D28 175x50x175x25 mm – Art. No. 4028653 2x Clamp Stop Angle D28 275x50x175x25 mm – Art. No. 4028654 1x Clamp and Stop Angle Set D28 300 x 275 x 100 mm (1x left, 1x right) – Art. No. 4028847 2x Flat Angle D28 175x175x25 mm, 1x elongated hole + 3x round holes – Art. No. 4028655

Sąlyga: naujas, Table length 2400 mm Table width 1200 mm Table height (side panel) 200 mm Weight 981 kg Space required approx. 2400 x 1200 mm SIEGMUND authorized dealer – all items available! !! SPECIAL PROMOTION !! SIEGMUND Welding Table Retro 2400x1200x200 incl. accessories SIEGMUND Welding Table like 25 years ago with plasma nitriding and modern table legs Product description - High-quality steel S355J2+N + plasma nitrided - Material thickness approx. 24.5 – 27 mm - Bore diameter Ø 28 mm - Surface borehole grid: 100x100 mm - Corners, edges, and bores rounded - Side panel height 200 mm - Side panel bores in a diagonal grid - Ribbed reinforcement - Grid lines allow for precise setups Welding tables are fitted with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - Corrosion-resistant / higher load capacity Features: - 28 mm bore pattern / dimensions 2400 x 1200 x 200 mm - plasma nitrided version with scale - includes 4x standard legs - includes accessory kit (see picture 3): * 6x 280604 * 12x 280511 * 8x 280420.N * 2x 280110.N Ffodpfxjxflfts Ab Set * 1x 283999

Sąlyga: naujas, Gamybos metai: 2025, Table length: 1000 mm Table width: 2000 mm Table height: 200 mm Weight: 650 kg Manufacturer: GERD WOLFF Technical Details: • Length: 2000 mm • Width: 1000 mm • Height: 200 mm • Weight: 650 kg • Hole diameter: 28 mm • Hole spacing: 100 mm • Plate thickness: 25 mm Advantages and Features • 3-day gas nitriding process • Increased corrosion resistance • Anti-adhesion protection against welding spatter • Maximum load capacity • Increased fatigue strength • Increased vibration resistance • Fine scale graduations • Reinforcement through weld seams and ribs on the underside Ffjdpfxeuia Nao Ab Sot • Optimal working height from 820–865 mm • 6 height-adjustable support legs • With matching accessory set (optional) Our welding tables are manufactured using HT 300 cast quality and are nitrided as a single unit after mechanical machining. In addition, these tables feature precise fine gradations, which are laser-engraved. To ensure appropriate stability, our welding tables are reinforced on the underside with weld seams and ribs (see images). They also undergo a 3-day gas nitriding process which, among other benefits, enhances the corrosion resistance as well as the fatigue and vibration strength of the tables. All our tables are equipped with adjustable legs. The minimum adjustment range is 620 mm, and the maximum is 665 mm. This allows for a variable working height from 820 to 865 mm. Other available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Images do not reflect actual size and serve for illustrative purposes only. Our welding tables are manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer. 3D Welding Table – 3D Clamping Fixtures – 3D Precision Welding Table

Gamybos metai: 2008, Sąlyga: geras (naudotas), mašinos/transporto priemonės numeris: 431808, Ref. No. 18177 Hydraulic flat, profile, and bar steel shear with notching device and punch Ffjdpfomidyiex Ab Sjt Technical Specifications: - Flat steel shear cuts up to 375 x 10 mm - 220 x 20 mm - Profile steel shear cuts L-angle steel at 90° up to 130 x 13 mm - Bar steel shear cuts round steel up to 45 mm - square steel up to 45 mm - Notching device with square notching unit 100 x 42 x 10 mm - Punching unit – Punching force 600 kN – with gauge table – Throat depth 300 mm – punches in steel up to 28 mm Ø in 15 mm or 34 mm Ø in 12 mm - Manual length stop - Drive 400 V / 4 kW - Space requirement approx. W 600 x H 1550 x D 1500 mm - Weight approx. 1300 kg

Sąlyga: naujas, Table diameter: 900 mm Table load capacity: 1.0 t Swivel range: 135 degrees Rotational speed: 0.12 - 1.2 rpm Fodefv Axxopfx Ab Sjft Faceplate height: 820 mm Welding current: 500 amperes Total power requirement: 0.75 + 0.55 kW Machine weight: approx. 1.1 t Space requirement: approx. 1.5 x 1.0 x 0.9 m - Self-locking gearbox: no overrun or backlash under eccentric load. - Electronic components by Schneider, Siemens, and Delta. - Infinitely variable, frequency-controlled turntable speed. - High stability due to robust construction. - Welding current transmission. - CE certificate. - Excellent price/performance ratio. - The D-HBE series is supplied as standard with cable remote control and foot switch.

Sąlyga: naujas, Table length: 1220 mm Table width: 760 mm Table height: 910 mm Machine weight: approx. 226 kg Welding table workbench + 66 accessories included Benefit from the best of both worlds: the functionality and quality of GERD WOLFF welding tables combined with the mobility of a cart. The workbench features an interchangeable, robust tabletop that accommodates all TM-fixture components with a diameter of approximately 1.6 cm. This enables you to have an ultimate, high-performance, and compact mobile workstation. Increase your clamping and fixing options and be ready for new projects with the GERD WOLFF welding table workbench + fixture set. The GERD WOLFF welding table workbench with fixture set is a turnkey system for clamping and fixing during welding and production. Clamp and fix at any point on the reversible, double-sided, precision-ground, nitrided (heat-treated) 121.92 x 76.2 cm tabletop to ensure accuracy in all your setups. Technical Specifications Hole diameter: approx. 1.6 cm Grid pattern: approx. 5 cm x 5 cm Tabletop size: 121.92 cm x 76.2 cm Tabletop thickness: approx. 1.6 cm ±0.01 cm Table flatness: ±0.0381 cm per 60.96 cm x 60.96 cm Table height: approx. 91 cm Static load capacity: approx. 680.4 kg Gross weight: approx. 222.26 kg Fixture Set (5/8-inch = 1.5875 cm) 2 x Inserta clamps, suitable for 1.5875 cm holes (UDN5150) 2 x Side clamps, suitable for 1.5875 cm holes 2 x Inserta pliers – suitable for 1.5875 cm holes (PTT522K) 2 x Inserta pliers – suitable for 1.5875 cm holes (PTT634K) 2 x Magnetic V-pads for the top 2 x Positioning pins, suitable for 1.5875 cm holes 2 x Angle brackets, 1.5875 cm holes (T50305) 2 x Angle brackets, 1.5875 cm holes (T50304) 4 x Stops, suitable for 1.5875 cm holes (T54203) 4 x Stops, suitable for 1.5875 cm holes (T54205) 4 x V-block spacers, suitable for 1.5875 cm holes 8 x D-stop rods, 1.5875 cm holes 8 x V-blocks, suitable for 1.5875 cm holes Fodpfx Abexqrhls Seft 10 x Ball plunger screws, suitable for 1.5875 cm holes 12 x Magnetic support pins

Sąlyga: naujas, Table length: 1300 mm Table width: 800 mm Table height: 920 - 1000 mm Load capacity: 1000 kg Lifting height: 510 - 1550 mm Total connected load: 1.5 kW Connection voltage: 230 V Machine weight: approx. 0.55 t Welding table mounted on lift table: Fodpfsvn U Exjx Ab Soft Hole diameter: 28 mm Table made of 15 mm thick S355 steel Surface pickled and oiled. Tolerance: Top +/- 1 mm and sides +/- 1 degree. Side plates: 150 x 10 mm Bottom reinforced with ribbing.

Sąlyga: naujas, Condition: new Delivery time: approx. 2 – 4 weeks from order Price: €4,400 Working area: 2400 x 1200 mm Ffodpswiriiofx Ab Sst Table height: 850 mm Load capacity: 8,000 kg Weight: 945 kg Side panel height: 200 mm Bore diameter: 28 mm OUR PREMIUM TABLE SYSTEMS WITH 28 MM HOLE PATTERN SET THE STANDARD FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS. THE 3D MODELS FORM THE BASIS OF THE ENTIRE SYSTEM, WHICH CAN BE EXTENDED IN ANY DIRECTION ON ALL FIVE SIDES. * Solid milled table top, 25 mm thick, made of S355J2+N, with high degree of accuracy (+/- 0.05 mm) and rounded edges and holes * HARD CHROMED TABLE SURFACE CR75M+ With a longer and more intensive hardening process, the new CR75M+ surface achieves an even denser chrome structure, enhancing the already established properties and significantly increasing durability. The matte surface is not only more resistant to visual wear but also dramatically more scratch and impact resistant. Established benefits of a minimum hardness rating of 750 HV as well as electrical conductivity are preserved. * Precision fit and dimensional accuracy for tools with 28 mm hole pattern (compatible with comparable premium brands) * Grid lines: 100 x 100 mm * Heavy-duty standard table legs included, load capacity 2 tons per leg; optional castor version: 700 kg per leg * Various leg options available (standard, height-adjustable, or with castors) * Continuous 200 mm high side panels with 3-row hole pattern (top/bottom at 50 mm intervals) * Dual-sided millimeter scale * Base frame with reinforcing elements * Load capacity: 8 tons

Sąlyga: naudotas, Punching force: 550 kN (e.g., punches 30 mm holes in 16 mm thick material), with locating device triggered via foot switch for center punching Cuts 350 x 13 mm or 230 mm at the flat bar shear Throat depth: 305 mm Ffodet Exprjpfx Ab Set Two separate foot switches for the punching and shearing stations, allowing independent punching and shearing operations Support table at the punching station A set of tools is included in the price