Dviejų diskų šlifuoklis 300 mm

Himmelwerk ST 300/2

Gamybos metai: 2011, būklė: beveik kaip naujas (naudotas), For sale is 1 roller conveyor including one geared motor each: Technical data: Year of manufacture: 2011 Length: 12.75 m Width: 1.40 m Height: 1.00 m Load capacity: up to 4 tons Geared motor per conveyor: Gedpfx Abjihpn No Sstw SEW-EURODRIVE R87 DREE90L4 (for more details, please refer to the type plate in the photo) Three out of four roller conveyors are equipped with a continuous wooden side wall along the entire length, while one conveyor features a lateral wooden wall over a length of 5.20 m. Two out of the four conveyors are each fitted with 3 lateral removal systems. (see pictures)

Būklė: naujas, Format circular saw ALTENDORF WA 6 - Exhibition machine - manual height adjustment, double roller carriage, scoring unit, tiltable, extension table, mitre fence, automatic brake, lowerable below table height ----- Technical data ----- Tilting range: 0 - 45°, cutting length: 2,500 mm, cutting width at rip fence: 1,000 mm, max. cutting height: 100 mm, max. saw blade Ø: 315 mm, tilting range of mitre fence: up to 49°, speeds: 4,200 rpm, motor power main motor: 5.5 HP / 4.0 kW, motor power scoring motor: 0.5 HP / 0.37 kW, table height: 910 mm, extraction port Ø: each 1 x 100 / 50 mm, weight: 450 kg Gedpfxju R Sx Ee Ab Sotw - new exhibition machine -

Gamybos metai: 2023, būklė: naujas, Maximum chipping height: mm 200 Feed width: mm 500 Feed rollers: pcs. 3 Rotor diameter: mm 600 Chipping length approx.: mm 20–30 Output capacity: 16–20 rm/h wood chips Gtsdpfjncd Azox Ab Ssw Chipping knives: pcs. 2 Feed motors: kW 2x2.2 Net weight approx.: kg 4100 Feed: horizontal Machine frame: steel, shielded gas welded Rotor: steel, shielded gas welded, dynamically balanced Bearing: Oversized roller bearings Bearing housing: steel flange housings Feed rollers: steel, specially toothed Chip discharge: below the machine Screen: (sieve) for re-shredding overlength material Drive pulley: matched to main motor N=1500 min-1 Hydraulic system: consisting of hydraulic pump, membrane accumulator, cylinder, pressure gauge, control valves for lifting the upper feed roller Feed system: by 2 geared motors, manufacturer NORD GETRIEBE

Būklė: naujas, Gamybos metai: 2024, New machine Year of manufacture: 2024 Features and Technical Specifications: Maximum configuration for professional users, optionally with Tersa or spiral cutter block Equipped with a TERSA cutter block for lightning-fast planer knife changes TERSA planer knife system ensures particularly quiet operation Helically toothed steel feed roller for consistent and uniform material infeed Material feed with two speeds via a separate motor The extra-long jointer tables enable easy and precise straightening of workpieces Work tables are made of cast iron, stress-relieved and annealed, ensuring durability and permanent flatness Synchronously opening jointer tables to the rear for short setup times Thicknessing table adjustment via handwheel with digital height display High machine weight ensures maximum precision and smooth operation Powerful industrial motor Robust steel/cast iron construction Planing depth as low as 0.2 mm (minimum workpiece thickness 3 mm) thanks to helical feed roller (ideal for economical hardwood planing) Quality – Made in Europe Equipment details: Tersa cutter block No adjustments or tightening required Knife changes in seconds Self-locking Particularly quiet operation Material feed Helically toothed steel feed rollers for consistent and uniform wood infeed without marks Multiple teeth engage at once for powerful feed Maintenance-free compared to rubber feed rollers Fixed dust extraction hood Thanks to the fixed dust extraction hood, hose changes are not required during conversion This saves valuable working time Simultaneous Opening of Jointer Tables Simultaneous folding up of the jointer tables with spring assist for quick and convenient conversion to thicknessing in seconds Thicknessing Table Adjustment FS 41 elite s with thicknessing table adjustment via handwheel with integrated display The thicknessing table is mounted on four oversized spindles, ensuring the greatest stability under all working conditions. Thanks to the special lifting mechanism, the table position remains perfectly stable even without locking. Kickback Prevention Massive anti-kickback devices prevent workpiece kickback The 4-knife cutter block delivers optimal planing results Anodized aluminum fence Large dimensions (1200 x 150 mm) Easily adjustable Gtjdpew Rhkqjfx Ab Sjw Tilts from 90° to 45° via scale Supplied with auxiliary fence for safe planing of narrow workpieces Digital Version With electronic thicknessing table height adjustment and digital display Scope of delivery: Jointer fence with round bar guide 2 feed speeds Tersa cutter block Technical Data Jointer table total length: 2200 mm Jointer infeed table length: --- Jointer table height: --- Jointer working width: 410 mm Jointer max. cutting depth: 5 mm Jointer fence dimensions: 1200 x 150 mm Jointer fence tilting range: --- Thicknessing table dimensions: 775 x 410 mm Minimum thicknessing height: 3 mm Maximum thicknessing height: 240 mm Minimum thicknessing length: --- Thicknessing feed speeds: 6 / 12 m/min Cutter block speed: 5000 rpm Cutter block diameter: 95 mm Number of planer knives: 4 pcs Electric: ---

Būklė: paruoštas naudoti (naudotas), Linia odzysku złomu z następującymi maszynami: Jedna dwutarczowa krajarka krawędziująca do desek Jedna jednowrzecionowa piła pozioma rozrzynająca Gtodpfx Ajgwqk Seb Sew System przenośników pomiędzy maszynami w komplecie.

Būklė: naujas, Gamybos metai: 2025,

Būklė: geras (naudotas), Board sorting line / Sorting system / Length sorting line Esterer Right-hand discharge 5 sorting bins Total length: 26 meters 1st bin: 2 meters 2nd bin: 3 meters 3rd bin: 4 meters 4th bin: 5 meters Gedpfx Ajgw Scqob Sstw 5th bin: >5 meters Good condition – immediately available Location: Germany, near Landau an der Isar Also see my other listings. I look forward to your inquiry.

Būklė: naudotas, Nikmann FS 41N obliavimo ir storio obliavimo staklės - obliavimo plotis 41 cm - velenas su 4 peiliais Gtedpfx Asya Drvjb Sow - 2 stalo volai - variklis su stabdžiu Staklės labai geros, puikios būklės.

Būklė: naujas, Gamybos metai: 2026, The Cormak TS255 table saw is a precision woodworking machine distinguished by advanced features and robust construction. Key advantages of the professional TS255 400V table saw for cutting wood: Precise Height and Angle Adjustment: The saw is fitted with an intuitive handwheel enabling precise adjustment of both height and cutting angle, ensuring accuracy for a wide variety of cutting tasks. Parallel Fence: The machine features a parallel fence, guaranteeing stable and accurate material guidance during cutting. Cast Iron Table and Table Extension: The worktable is made of durable cast iron and precision-ground to ensure smooth material feed. Additionally, the machine comes equipped with a table extension, increasing the working surface area. Stable Construction: The saw is designed with stability and durability in mind, making it suitable for demanding operations in various woodworking shops. Integrated Side Table: An additional benefit is the integrated side table, which significantly expands cutting capabilities by allowing work with larger components. Gtedpevxhlgjfx Ab Ssw Powerful Motor: Driven by a three-phase electric motor rated at 2.2 kW and 4,000 rpm, the TS255 delivers effective cutting of wooden components and even the most demanding boards in any workshop. Application of the precision table saw with a 254 mm circular saw blade: The Cormak TS255 table saw is a versatile machine, distinguished by its precision and solid build. With its adjustable height and cutting angle, as well as a stable construction, it is ideal for a wide range of joinery workshops. Additionally, the integrated side table increases the range of cutting capabilities. It is an indispensable machine for professional carpenters and demanding hobbyists alike. Technical Data Maximum blade diameter: 254 mm Blade speed: 4,000 rpm Blade tilt range: 90°–45° Maximum cutting depth at 45°: 50 mm Maximum cutting depth at 90°: 80 mm Worktable dimensions: 350 x 800 mm Sliding table dimensions: 240 x 1320 mm Maximum cutting width: 1250 mm Maximum cutting length: 1300 mm Continuous duty motor power S1: 2.2 kW Power supply: 400 V Weight: 180 kg Dimensions: 1550 x 1900 x 820 mm

Būklė: naujas, Gamybos metai: 2024, New machine Year of manufacture: 2024 Triple spindle under-table router by RUWI Professional equipment for the workshop This under-table router enables easy chamfering, edge rounding, profiling, grooving, sanding, and various other milling tasks to quickly achieve the desired result. Fast tool changes are possible thanks to accessible tool storage. Larger models increasingly reduce setup times. Costly and time-consuming fine adjustments and test routings are eliminated when equipped with all essential tools. The spindle can be continuously adjusted to the required working position. This model is ideal for workshop use and is frequently employed for final finishing. Made in Germany. Features and technical data: - High-quality workmanship - 3 tools available at any time - Electronic control prevents speed fluctuations under load - Robust, high-capacity motor - Motor with overload protection - Temperature monitoring with PTC resistor - Soft start and inrush current limiter - Counter-rotating return thread above the ball bearings reduces ingress of dust and dirt - Quick tool change - Dust extraction above and below the table top - 1x fine adjustment - Includes stop ruler - Includes mounting kit for table extension - Convenient tool change from above - BG and wood dust tested Technical data: - Table size: 640 x 500 mm - Table height: 910 mm - Continuously variable speed control: 8,000 - 25,000 rpm - Tools available: 3 - Milling stroke: 43 mm - Motor power: 1,050 watts for continuous industrial use - Voltage: 230 V Gjdpfsrk Tqkjx Ab Sstw - Milling spindle: 22 mm diameter - Collets: 8 mm (standard), optionally also 6 mm, 6.35 mm and 10 mm - Extraction port: 120 mm - Mobility: 4 swivel castors - Weight: 91 kg Availability: short-term Location: Solingen