Hidrauliniai Vise

HILMA PWO-001896

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 930088, Country of Manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net Weight (machine + cabinet): 3250 kg + 400 kg Customs Tariff Number: 8456.30 20 Nkjdpfsw Ucyuex Af Net Dimensions: 260x281x225 cm TECHNICAL SPECIFICATIONS Machining Type: immersion Maximum workpiece dimensions: 1200x700x400 mm Maximum workpiece weight: 1500 kg Table size: 900x600 mm Floor to table distance: 900 mm Total dielectric volume: 1200 L X, Y, Z, U, and V axes X, Y, Z travels: 550 x 350 x 400 mm U, V travels: 550 x 350 mm Anti-collision protection: X, Y, U, V, Z axes Taper machining, max. cone: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (option 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weight and type (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: double Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measuring resolution: 0.5 micron Servomotors: AC type All technical data provided without liability for errors or omissions.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Demag Ergotech - System 250/280-80 Clamping force: 25 tons Screw diameter: 25 mm Year of manufacture: 2003 Nkjdjhrw Amepfx Af Not Sprue picker 2 units

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1977, Mechaniko tekinis staklės Gamintojas: WEILER Modelis: MDU 260 Pagaminimo metai: 1977 – patikrinta dirbtuvėse Mašinos Nr.: 14942 Centro aukštis: 125 mm Veleno anga: 28 mm Priedai: - Elektrinis griebtuvų apsauginis gaubtas - 3-žnyplių griebtuvas Ø 140 mm įskaitant tekinimo žnyplių komplektą įskaitant gręžimo žnyplių komplektą - 4-žnyplių griebtuvas Ø 140 mm įskaitant tekinimo žnyplių komplektą įskaitant gręžimo žnyplių komplektą - Saugus tekinimo griebtuvų raktas - Rankinis prispaudimo įtaisas - Spaustukų komplektas W28 (366E) - Komplektas (=25 vnt.) spaustukų W28 (366E) nuo 1,0 iki 25,0 mm kas 1,0 mm - Standus centras velenui W28 (366E) Nkedpfx Aexv A I Tef Not - Greitos pakeitimo įrankių laikiklis Pagrindinis korpusas Gr. A - Naudojimo instrukcija Naudota kaip matyta, be garantijos Mašina techniškai atitinka savo pagaminimo metų standartą.

Sąlyga: naudotas, Gamybos metai: 2009, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 73136, X ašies eiga: 1 350 mm, Y ašies eiga: 1 150 mm, Z ašies eigos atstumas: 720 mm, nominali (akivaizdi) galia: 64 kVA, valdiklių gamintojas: Heidenhain, valdiklio modelis: iTNC 530, bendras aukštis: 3 150 mm, bendras ilgis: 5 605 mm, bendras plotis: 4 290 mm, bendras svoris: 12 600 kg, veleno greitis (min.): 15 000 aps./min, veleno veikimo valandos: 21 786 h, įrankių magazino lizdų skaičius: 46, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, +GF+ MIKRON HPM 1350U – 5-Axis Machining Center (Year of manufacture 2009) Used 5-axis milling machine MIKRON HPM 1350U from 2009. The machine is in working condition and comes from ongoing production. Equipped with Heidenhain iTNC 530 control, rotary table Ø 1100 mm, 46-position tool magazine, and Renishaw OMP60 probing system. Operating hours (as read): - Control on: approx. 112,194 h - Machine on: approx. 72,272 h - Spindle on: approx. 21,786 h - Programs: approx. 21,654 h Condition: Used machine with standard signs of use, technically functional. Inspection under power available by appointment. Working Areas Travel paths: - X-axis: 1350 mm - Y-axis: 1150 mm - Z-axis: 720 mm (vertical spindle) / 895 mm (horizontal spindle) Spindle - Standard spindle 15,000 rpm - Speed range: 0–15,000 rpm - Acceleration time to max. speed: approx. 2.5 s - Power: 38 kW (S6 = 40% duty cycle, TS = 2 min) - Torque: 193 Nm (S6 = 40% duty cycle) - Tool holder: HSK-A63 (DIN 69063-1, optional ISO-B40/DIN 69871) - Max. tool diameter: 130 mm (fully loaded) - Bearings: Ceramic-hybrid Ø 70 / Cronidur-Steel - Lubrication: Permanently lubricated - Cooling: Water with corrosion protection Feed Drives - Feed motors: AC - Rapid traverse/working feed: 32 m/min (20% duty cycle) 10 m/min (100% duty cycle) max. 15 m/min (40% duty cycle/h) - Measuring systems X/Y/Z: Linear scales (direct) Rotary Table - Clamping surface: Ø 1100 × 1000 mm, flattened sides - Table load: 1600 kg - T-slots: 8 × 18H12 + 1 alignment slot 18H7 (100 mm spacing) - Centering bore: Ø 50 H6 - Clamping torque: 8000 Nm - Max. mass moment of inertia: 75 kg·m² - Table height above floor: 1120 mm - Table drive: Torque motor, direct - Drive torque: 1600 Nm (40% duty cycle, 2 min) Swivel Axis (A-axis) - NC swivel range: +16° to −120° - Measuring system: direct, absolute - Clamping principle: hydraulic, stepless - Max. swivel speed: 4000 °/min - Max. working swivel torque: 600 Nm (S6 40%) - Swivel time 0° → 90°: 0.9 s Tool Magazine / Changer Nkedpfxsx Eh Iqj Af Net - 46-position magazine (installed as per documentation) - Magazine slots: 46 - Tool holder: HSK-A63 (DIN 69063-1), optional ISO-B40 - Max. tool diameter: 80 mm fully loaded 130 mm partially loaded - Max. tool length: 300 mm - Max. tool weight: 8 kg - Magazine capacity: 200 kg - Chip-to-chip time (vertical): 11 s Coolant / Chip Conveyance - External coolant supply (AKZ): 40 l/min, 2.5 bar - Internal coolant supply (IKZ) Electrical Data: - Installed nominal power: 75 kW - Connected load: 58 kW - Power input: 64 kVA - Control voltage: 24 V DC - Operating voltage: 3 × 400 V, 50 Hz - Protection class: IP54 Dimensions & Weight - Machine weight: approx. 12,600 kg (without accessories) - Required space (L × W × H): 5605 × 4290 × 3150 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, OKUMA Euro Center V50 Year of manufacture: 2002 Control system Nsdpfjrfw Nhex Af Nokt OSP-U100L Travel distances X-axis: 1020 mm Y-axis: 510 mm Z-axis: 525 mm Table load capacity: 680 kg Clamping surface: 1200 x 510 mm Tool changer 20 magazine slots Chip conveyor

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Deckel FP2 repowered by FPS, year of manufacture 2013, equipped with 3-axis Heidenhain ND 780 digital readout. Like new condition! Technical data: - Machine No.: 2202-7020, FPS No.: 3364, year of manufacture 2013 - Fixed angle table - Spindle speed: 40 - 2000 rpm - Feed and rapid traverse on 3 axes - Motor power: 2.2 kW - Travel X/Y/Z: 400/200/400 mm - Equipment: vertical & horizontal spindle - Vertically and horizontally extendable quill – SK-40 - Drawbar system S20x2 - Weight approx. 1,100 kg Nkodpevbifgjfx Af Nst Accessories and configuration: - 3-axis Heidenhain ND 780 digital readout - Brake motor with instant spindle stop - Centralized lubrication system - 2x emergency stop buttons - Operating manual - Coolant system About the machine: For sale is a Universal Milling Machine Deckel FP2 repowered by FPS, in mint condition. The Deckel is equipped with a brake motor for immediate spindle stop and an electric central lubrication system. For safety, it features two emergency stop switches (as of 2013). Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the Deckel under power on site. The machine is immediately available.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2004, X ašies eiga: 600 mm, Y ašies eiga: 450 mm, Z ašies eigos atstumas: 450 mm, nominali (akivaizdi) galia: 10 kVA, bendras svoris: 6 500 kg, veleno greitis (maks.): 20 000 aps./min, Heidenhain TNC530, 4 ašies daliklis velenas 20 000 aps./min, HSK 63 stalas 850x530 mm ėjimai 600x450x450 mm Nkedpfx Afow Dc Ire Nst 30 įrankių keitiklis svoris 6 500 kg

Sąlyga: labai geros būklės (naudotas), Dividing Head Walter Type UPA 125 N (28487) direct and indirect dividing center height 125 mm usable in horizontal and vertical positions spindle taper MT 4 KKG 3 traverse path SPH 125 mm mount MK 2 total transport weight 62 kg dividing head 48 kg Nsdpfxstrnnde Af Nekt

Sąlyga: paruoštas naudoti (naudotas), Number of tool stations: 25, max. spindle speed: 6300 rpm, taper: SK40 with DIN 7388 drawbar, connected load: 35 kVA, control: Deckel Maho MillPlus, operating/spindle hours: 56,344 / 14,965 h, equipped with chip conveyor and 600 l coolant tank, supplied without tools and clamping devices. Njdpfx Afolbmtne Njkt

Sąlyga: naudotas, Details on request Nkedpfx Afsdbmyzs Not