2431 m

Hilma hydraulisch

Sąlyga: labai geros būklės (naudotas), Hydraulic vice Manufacturer: Hilma Jaw width: 200 mm Jaw height: 65 mm Maximum clamping width: 440 mm Overall height: 160 mm Kwodpfek N A Dmsx Af Iet Overall length: 1030 mm Transport dimensions: Length: 700 mm Width: 280 mm Height: 160 mm Weight: 115 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 930088, Country of Manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net Weight (machine + cabinet): 3250 kg + 400 kg Customs Tariff Number: 8456.30 20 Dimensions: 260x281x225 cm TECHNICAL SPECIFICATIONS Machining Type: immersion Maximum workpiece dimensions: 1200x700x400 mm Maximum workpiece weight: 1500 kg Table size: 900x600 mm Floor to table distance: 900 mm Total dielectric volume: 1200 L X, Y, Z, U, and V axes X, Y, Z travels: 550 x 350 x 400 mm U, V travels: 550 x 350 mm Anti-collision protection: X, Y, U, V, Z axes Taper machining, max. cone: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (option 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weight and type (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: double Isopulse source Kwodpfx Afsw Ucyue Iot Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measuring resolution: 0.5 micron Servomotors: AC type All technical data provided without liability for errors or omissions.

Sąlyga: labai geros būklės (naudotas), hydraulic vice Make: HILMA Jaw width: 200 mm Maximum opening width: 335 mm Jaw height: 68 mm Total height: 168 mm Kwsdpfxjg Eztce Af Iot Minimum length: 690 mm Maximum length: 920 mm Maximum width: 290 mm Weight: 114 kg

Gamybos metai: 1955, Sąlyga: naudotas, Radial drilling machine, drill press, radial arm drilling machine Kwjdpfxsd Enr Ie Af Iot - Arm reach: 2055 mm - Max. distance from machine table to spindle mount: 1700 mm - Taper: MT5 - Motor power: 7.5 kW - Spindle speeds: 11.2–1400 rpm - Column diameter: Ø 450 mm - Spindle stroke: 540 mm - Thread cutting device - Automatic feed: 0.037–2.0 mm/rev - Clamping area: 920 x 1600 mm - Dimensions: 2580/1110/H3450 mm - Weight: 6465 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2003, Demag Ergotech - System 250/280-80 Kwjdpfx Aehrw Amof Iot Clamping force: 25 tons Screw diameter: 25 mm Year of manufacture: 2003 Sprue picker 2 units

Sąlyga: naudotas, Gamybos metai: 2009, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 73136, X ašies eiga: 1 350 mm, Y ašies eiga: 1 150 mm, Z ašies eigos atstumas: 720 mm, nominali (akivaizdi) galia: 64 kVA, valdiklių gamintojas: Heidenhain, valdiklio modelis: iTNC 530, bendras aukštis: 3 150 mm, bendras ilgis: 5 605 mm, bendras plotis: 4 290 mm, bendras svoris: 12 600 kg, veleno greitis (min.): 15 000 aps./min, veleno veikimo valandos: 21 786 h, įrankių magazino lizdų skaičius: 46, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, +GF+ MIKRON HPM 1350U – 5-Axis Machining Center (Year of manufacture 2009) Used 5-axis milling machine MIKRON HPM 1350U from 2009. The machine is in working condition and comes from ongoing production. Equipped with Heidenhain iTNC 530 control, rotary table Ø 1100 mm, 46-position tool magazine, and Renishaw OMP60 probing system. Operating hours (as read): - Control on: approx. 112,194 h - Machine on: approx. 72,272 h - Spindle on: approx. 21,786 h - Programs: approx. 21,654 h Condition: Used machine with standard signs of use, technically functional. Inspection under power available by appointment. Working Areas Travel paths: - X-axis: 1350 mm - Y-axis: 1150 mm - Z-axis: 720 mm (vertical spindle) / 895 mm (horizontal spindle) Spindle - Standard spindle 15,000 rpm Kjdpfx Afsx Eh Iqo Ijwt - Speed range: 0–15,000 rpm - Acceleration time to max. speed: approx. 2.5 s - Power: 38 kW (S6 = 40% duty cycle, TS = 2 min) - Torque: 193 Nm (S6 = 40% duty cycle) - Tool holder: HSK-A63 (DIN 69063-1, optional ISO-B40/DIN 69871) - Max. tool diameter: 130 mm (fully loaded) - Bearings: Ceramic-hybrid Ø 70 / Cronidur-Steel - Lubrication: Permanently lubricated - Cooling: Water with corrosion protection Feed Drives - Feed motors: AC - Rapid traverse/working feed: 32 m/min (20% duty cycle) 10 m/min (100% duty cycle) max. 15 m/min (40% duty cycle/h) - Measuring systems X/Y/Z: Linear scales (direct) Rotary Table - Clamping surface: Ø 1100 × 1000 mm, flattened sides - Table load: 1600 kg - T-slots: 8 × 18H12 + 1 alignment slot 18H7 (100 mm spacing) - Centering bore: Ø 50 H6 - Clamping torque: 8000 Nm - Max. mass moment of inertia: 75 kg·m² - Table height above floor: 1120 mm - Table drive: Torque motor, direct - Drive torque: 1600 Nm (40% duty cycle, 2 min) Swivel Axis (A-axis) - NC swivel range: +16° to −120° - Measuring system: direct, absolute - Clamping principle: hydraulic, stepless - Max. swivel speed: 4000 °/min - Max. working swivel torque: 600 Nm (S6 40%) - Swivel time 0° → 90°: 0.9 s Tool Magazine / Changer - 46-position magazine (installed as per documentation) - Magazine slots: 46 - Tool holder: HSK-A63 (DIN 69063-1), optional ISO-B40 - Max. tool diameter: 80 mm fully loaded 130 mm partially loaded - Max. tool length: 300 mm - Max. tool weight: 8 kg - Magazine capacity: 200 kg - Chip-to-chip time (vertical): 11 s Coolant / Chip Conveyance - External coolant supply (AKZ): 40 l/min, 2.5 bar - Internal coolant supply (IKZ) Electrical Data: - Installed nominal power: 75 kW - Connected load: 58 kW - Power input: 64 kVA - Control voltage: 24 V DC - Operating voltage: 3 × 400 V, 50 Hz - Protection class: IP54 Dimensions & Weight - Machine weight: approx. 12,600 kg (without accessories) - Required space (L × W × H): 5605 × 4290 × 3150 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, OKUMA Euro Center V50 Year of manufacture: 2002 Kwsdpjrfw Nhjfx Af Ijt Control system OSP-U100L Travel distances X-axis: 1020 mm Y-axis: 510 mm Z-axis: 525 mm Table load capacity: 680 kg Clamping surface: 1200 x 510 mm Tool changer 20 magazine slots Chip conveyor

Sąlyga: paruoštas naudoti (naudotas), Number of tool stations: 25, max. spindle speed: 6300 rpm, taper: SK40 with DIN 7388 drawbar, connected load: 35 kVA, control: Deckel Maho MillPlus, operating/spindle hours: 56,344 / 14,965 h, equipped with chip conveyor and 600 l coolant tank, supplied without tools and clamping devices. Kjdpfjlbmtnjx Af Iswt

Sąlyga: paruoštas naudoti (naudotas), Parduodama gerai išlaikyta Mikron VC 1000 frezavimo staklė dėl naujos įsigijimo. Kodpfjh Tnpxjx Af Iswt

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2004, X ašies eiga: 600 mm, Y ašies eiga: 450 mm, Z ašies eigos atstumas: 450 mm, nominali (akivaizdi) galia: 10 kVA, bendras svoris: 6 500 kg, veleno greitis (maks.): 20 000 aps./min, Heidenhain TNC530, 4 ašies daliklis velenas 20 000 aps./min, HSK 63 stalas 850x530 mm ėjimai 600x450x450 mm 30 įrankių keitiklis svoris 6 500 kg Kedpfx Afow Dc Irs Iewt