Vieno stulpelio spauda - hidraulinis

Hidralmac 150 Tonnen Mineralsteinpresse Salzpresse

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 006724, Max. working width: 1200 mm Max. processable length: 1200 mm Max. processable height: 1600 mm Godpfx Aou A Ev Ueczjtt

Gamybos metai: 2002, Sąlyga: labai geros būklės (naudotas),

Sąlyga: naujas, AGRE ALUP ALLEGRO 14+ 13 270 Variable speed. Space-saving. Cost-effective. Efficient 1:1 direct drive. Simple operation. Low energy consumption. High performance. Suitable for a wide range of applications. Superior compressed air quality. Cyclone separator and refrigerated dryer integrated. Detailed equipment: Compression concept: Oil-lubricated screw compressor Gjdpfx Acjixt I Hezstt Cooling: Air-cooled design Drive: High-frequency motor, with 1:1 direct drive Control: Variable speed control with frequency inverter Controller: Graphic controller C55DD Refrigerated dryer: Integrated, refrigerant R513A Filtration: including cyclone separator Tank: horizontal, painted Performance data: Free air delivery at operating pressure 7.0 bar = 0.26–2.26 m³/min Operating pressure min. / max.: 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load: 16.2 kW Motor rated power: 15 kW Oil quantity: 5.2 l Dimensions and weight: L x W x H = 1655 x 655 x 1550 mm Weight: 400 kg Compressed air outlet: G 3/4'' Compressed air receiver capacity: 270 l

Sąlyga: geras (naudotas), 522 USED Sveba Dahlen trolley oven. EXTERNAL DIMENSIONS (in cm): - width: 145 - length: 160 - height: 260 TECHNICAL DATA: - trolley dimensions: 60/80 EQUIPMENT: - burner for gas or oil, - 2 trolleys included. The equipment is available for inspection at our warehouse (36-068 Bachórz, Poland). Paid options available: complete overhaul with 12-month warranty / transport / installation / equipment start-up. The price shown is net. Gtodpfeikf Iuox Aczst WE SPEAK ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN. Our offer includes bakery ovens, rotary rack ovens, deck ovens, pastry ovens, shop ovens, bakery machines, bread lines, roll lines, cake lines, croissant lines, baguette machines, dough mixers, planetary mixers, dough sheeters, croissant formers. See all our listings.

Sąlyga: geras (naudotas), Gamybos metai: 2003, Main spindle: Speed range – main spindle: max. 6,000 rpm Drive power – main spindle: 16 kW Max. torque: 155 Nm C-axis: 360° Tool turret: Number of tool stations: 12 positions Gtodpfxsv Drigj Aczjt Number of driven tool stations: 12 positions Speed range – driven tools: max. 5,000 rpm Drive power – driven tools: 10 kW Tool holder: (VDI 30) Tool shank: 20 x 20 mm Travels: X-axis: 160 mm Z-axis: 450 mm Feeds: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 1/min Max. torque C: 155 Nm Connected load Machine weight approx.: 3.7 t Space requirement approx.: 4.5 x 2.5 x 2.5 m Control: Heidenhain Hollow clamping cylinder C-axis and tool drive Chip conveyor Oil and emulsion mist separator with electrostatic filter

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2012, veikimo valandos: 25 895 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 78 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 24 000 kg, alyvos bako talpa: 1 000 l, galia: 55 kW (74,78 AG), tūrio srautas: 930 m³/val, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of Manufacture: 2012 Total Operating Hours (Machine): 25,895 hours (as of July 2025) Effective Operating Hours (Pump): 14,135 hours (as of July 2025) Number of Bales Pressed: 235,597 (as of July 2025) Main Pressing Force: 78.5 t Specific Pressing Force: 95 N/cm² Pre-Press Force: 28 t Press Chamber Volume: 2.7 m³ Feed Opening Dimensions: 1,500 x 1,100 mm Theoretical Throughput: 930 m³/hour Throughput Under Operating Conditions: 410 m³/hour Bale Dimensions: 750 x 1,100 mm Drive Power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at Bulk Density of: - 30 kg/m³: approx. 9 to 12 t/hour (material dependent) - 50 kg/m³: approx. 14 to 17 t/hour (material dependent) - 100 kg/m³: approx. 16 to 25 t/hour (material dependent) Throughput at MSW (Municipal Solid Waste): approx. 20 to 27 t/hour (material dependent) Bale Weights: 450 to 600 kg (depending on material and bale length) Hydraulic Oil Tank Volume: 1,000 L Baler Dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine Weight (baler): approx. 24 t Condition of the Baler: The machine was partially overhauled and serviced in our workshop and, upon completion of the work, tested in both manual and automatic modes during operation. Gtedpfxsvwlqqj Aczot The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank completely drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers removed from the press ram and replaced - Twisting wire station with lower wire deflection pulleys cleaned and made operational - Side guides of press ram removed, smoothed, re-installed, and re-adjusted - Main hydraulic cylinder dismantled and disassembled for inspection - Piston rod replaced, cylinder tube honed - Complete seal set replaced, pressure test carried out - Hydraulic hose of main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying dismantled, cleaned, wire deflection pulleys made operational and serviced - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire cutters, twisting shafts, and twisting fingers checked, retightened with appropriate torque, and serviced - Door contact switch checked and partly replaced - Emergency stop switch checked - Complete electrical wiring checked and partly renewed - Bearings of the wire guide rollers under the press replaced - New safety guards for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed, and baler tested in manual and automatic mode Scope of Delivery: Only the baler is being sold. Remarks: Full documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagram). Inspection by appointment is possible. No liability is assumed for technical specifications or possible errors.

Sąlyga: naujas, Band saw machine Make: METALLKRAFT Model: BMBS 230 x 280 H-DG Art. No.: 3680013 Condition: New machine Cutting capacity (round): 230 mm Cutting speed: 35/70 m/min Standard equipment includes: - Horizontal vice - Length stop (600 mm) - Electromechanical monitoring of saw blade tension - Chip removal brush - Coolant device - Operating manual Gtsdpfx Ajcuntzoczot

Sąlyga: naudotas, Gamybos metai: 1988, Funkcionalumas: nepatikrintas, Berstorff mixing mill 400 x 900 mm Gedjr A Dfyjpfx Aczott More details in the attached description!

Sąlyga: naudotas, Table size 900 x 460 mm X/Y/Z travel – 600/400/420 mm Spindle speed 20–4000 rpm Spindle taper ISO 40 Hydraulic tool clamping Tool changer with 32 stations Drilling stroke in vertical head 75 mm Swiveling vertical head +/- 90° Control: Heidenhain TNC 407 Equipped with: Machine vice 19 tool holders Gjdpfx Acjl Dvx Eezstt Coolant system

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Complete robotic welding cell with turntable and enclosure Godpfx Asnr E Ensczstt Robot: KUKA KR 150 R2700 extra Payload: 150 kg Reach: 2,090 mm Includes welding gun (Dalex, new in 2018) with cooling system (closed-loop water cooling) A complete second welding gun (brand: ARO) is also included Dedicated cooling unit integrated within the system Automatic turntable with 10-position indexing (currently configured for 5 positions for the ongoing product) Workstation for loading and unloading parts is well-lit and secured with light curtains The entire system is controlled via Siemens PLC, programmed by HS Automation Siemens operator panel for system operation mounted at the loading station on a swivel arm All components are housed within an enclosure with a safety door The system can still be inspected in operation.