Naudotas SPC3000

HGG Profiling Equipment B.V.

Būklė: naujas, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). You save 24% compared to the RRP! 150-ton straightening press with electric motor and additional manual hand operation via a hand lever pump, specifically designed for precision work. Available models: 30t 60t 100t 150t 200t >200t: on request Custom machines: on request Brand new machine! We are also happy to build a custom press to your specifications. Rodpfsf Sqckox Af Aet High-quality hydraulic workshop press with a maximum pressing force of 150 tons. The press can also be operated in the traditional electric mode via a lever for both upward and downward movement. For precise tasks (e.g., pressing in bearings, straightening, etc.), the press is also equipped with a hand pump, allowing you to finely control the force manually. The pressure cylinder is mounted on a movable carriage, allowing it to be shifted laterally. This enables you to make optimal use of the maximum frame passage width. Features: - 150 tons maximum pressing force - Pressure gauge with manometer - 2 operating modes: electric operation or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety features - Adjustable working height - Draw chains for easy adjustment of the working height - Sturdy machine frame - Cylinder laterally adjustable (mounted on movable carriage) The press can be tested under power on site. ----- Many other workshop presses in various models, sizes, and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please feel free to contact us; we will be happy to advise you without obligation. The quoted price is net plus 19% VAT. All information subject to change. Europe-wide delivery available! ----- The European Commission provides an online platform for out-of-court dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations take place via telecommunications (email, fax, telephone, message portal), during which we will first provide you with a non-binding quote, along with information about our general terms and conditions and the right of withdrawal including our imprint, before any purchase or contract comes into effect.

Būklė: geras (naudotas), Gamybos metai: 2012, CNC portalinis plazminio pjovimo staklė Gamintojas: Microstep Tipas: SPL PAA 9001.25 Pagaminimo metai: 2012 CNC valdymas Darbinis plotas: 2.500 x 9.000 mm 1 plazminis degiklis su Kjellberg HiFocus 280i srovės šaltiniu 2 autogeniniai degikliai su propanu Vibracinis tiekimo stalas Beuting Filtravimo įrenginys Donaldson DFPRO12 lauko montavimui Rodpfxeu U Hm Ae Af Ast 16426ä

Būklė: labai geros būklės (naudotas), Gamybos metai: 2003, darbinis plotis: 215 mm, suvirinimo galia (maks.): 750 kVA, Komplette Gitter- bzw. Schweißgitter-Fertigungslinie Die Anlage besteht aus: Rsdpfoqy Ek Aex Af Aet - Schweißgitterlinie SCHLATTER PG 24, halbautomatisch, Baujahr 2002 - Gitterträgerlinie SMEI, vollautomatisch, Baujahr 2003 - Richt- und Abschneidmaschinen 1x Wafios R4 2x VITARI NR16 1x VITARI NR10 - Drahtziehlinie SMEI, Eingangsdraht max. 10 mm, Geschwindigkeit: 4 m/sec - Widerstandsschweißmaschine SMEI - Drahtspitzmaschine SMEI

Būklė: naujas, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650 x 450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-Column Double Miter Bandsaw K-tech DG 62/45 HA-I • 2-column miter saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation due to inclined cutting, feed rate and cutting pressure control Rjdod Iipmopfx Af Aot • Heavy-duty material infeed roller • Removable chip tray (for easy cleaning) • Energy-efficient and low-vibration operation through inclined cutting • Ergonomic, safe, and freestanding control panel • Frequency-controlled saw drive 15 - 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Large-diameter flywheels (520 mm) • Clear mitre adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid downfeed to start of material or cut immediately for serial cuts 4. Saw blade off 5. Raise frame just above the material 6. Vise opens

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, bendras ilgis: 2 750 mm, bendras plotis: 2 800 mm, bendras aukštis: 1 830 mm, vietos reikalavimas ilgis: 2 800 mm, reikalingas plotis: 2 850 mm, reikalingas aukštis: 1 900 mm, variklių gamintojas: Bitzer, tūrio srautas: 940 m³/val, Two used Bitzer screw compressor skids for low temperature applications with Freon. Both skids are supplied with a shared control cabinet. Originally, each skid served its own freezer room, but the capacities listed in the specifications are combined values. Skid 1 is equipped with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger as economizer, a brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid offers a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Skid 2 is supplied with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger as economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid provides a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Bitzer HSN 7461-70-40P (x2) capacities: -20ºC/+40ºC: 229.6 kW -30ºC/+40ºC: 157.4 kW Rsdox Ap Hpjpfx Af Aot -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2003, mašinos/transporto priemonės numeris: NOH366, ABUS ELV krano sistema, krano bėgių tiltas, tiltinis kranas, salės kranas, kranas Identiški kranai yra 3 vnt. !!! Naudingoji apkrova / kėlimo galia: 5 t - 5000 kg Vėžės plotis: 14260 mm, išorinis matmuo apie 14500 mm Rodpfxjxtyvpo Af Aot Pagaminimo metai: 2003, su radijo valdymu ir rezervine grindų valdymo panele Kėlimo aukštis: 6 m Statybinis aukštis (nuo krano viršaus iki kablio): apie 900 mm Galvutės sijos ilgis su amortizatoriumi: apie 280 cm Papildoma informacija bus pateikta Kranas demontuotas, galima iš karto pasiimti Labai gera būklė, yra techninis patikros žurnalas Taip pat yra kolonų sukamųjų ir sieninių sukamųjų kranų Demag KBK ir Abus HB sistemos, taip pat Errikla, Hadef, Stahl KT 2000 ir kt. Gabenimas per ekspediciją galimas, teiraukitės pagal pašto kodą Pirmenybė teikiama atsiėmimui vietoje

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus,

Gamybos metai: 2022, būklė: naujas, Load capacity: 10,000 kg Speed: 0.03–1.6 rpm Redofxgp Uspfx Af Aot Faceplate diameter: 1,500 mm, extendable to 2,500 mm Welding current transmission: 800 A

Būklė: naudotas, System: Used piston diaphragm high-pressure pump / feed pump Redpfx Asdkdi Tjf Aet Type: HMD-G-50-500 Flow rate: 40.0 m³/h Pressure: 1.6 MPa

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, garantijos trukmė: 3 mėnesiai, aušinimo tipas: vanduo, suvirinimo srovė esant 60 % darbo ciklui: 500 A, suvirinimo srovė esant 100 % darbo ciklui: 400 A, For sale: Miller PipeWorx 400 565 AMP (60% at 500A, 100% at 400A) 380 Volt Year: 2013 Water-cooled Pulse Redpfx Afjx Rppcj Ast RMD Program memory Electrode option Suitable for welding steel and stainless steel Completely overhauled, tested, and serviced. Test welding possible. Includes 1.0-1.2mm feed rollers, 2x PRO5000 welding torches, ground cables, gas hose, transport trolley, and 3 months warranty. Test welding is possible. A video of the machine in welding operation is available. We also deliver to countries such as Spain, Germany, Austria, Lithuania, Greece, and all other countries inside and outside Europe with Euro pallets per shipment. All our machines have been serviced and are 100% ready for use unless otherwise stated. The photos above show the actual machine. We can also offer other types of machines, including: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, We offer the following brands: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business directly with Cjays Lastechniek – never with third parties.