Centras tekinys

Heyligenstaedt EV400 / 2000

Sąlyga: naudotas, Gamybos metai: 1985, Swing diameter over bed: 810 mm Maximum swing diameter over cross slide: 560 mm Distance between centers: 00 mm Bed width: 480 mm Cross slide travel: 400 mm Compound rest travel: 180 mm Turning tool shank cross-section: 32 x 25 mm Drive power: 22 kW Spindle torque: 30 Nm Spindle nose size: 11, DIN 55027 Spindle diameter in front bearing: 152.4 mm Spindle bore: 106 mm Speed range: 9 - 1800 rpm Number of spindle speeds: 24 Longitudinal feeds: 0.092 - mm/rev Cross feeds: 0.046 - mm/rev Metric threads: 0.5 - 112 mm Inch threads: 1/4 - 56 TPI (G/1") Thread module: mm Thread DP: 1 - 224 pitch Tailstock quill diameter: 115 mm Quill stroke: 225 mm Quill taper: MK 6 Workpiece weight between centers max.: 00 kg Maximum workpiece weight—overhung: 750 kg 3-jaw chuck Röhm, Ø Machine dimensions approx.: 4600x1900x1600 mm Weight approx.: 4300 kg Number of feed/thread steps: 99 Distance between centers: 00 mm Accessories: - 3-axis digital readout (DRO) Nksdpfx Aexn Ty Rsf Iot - Mobile chip guard along the full length (Plexiglas) - Coolant system - Rapid traverse in Z and X axes - Multifix tool holder size C with 6 interchangeable cassettes - Bed stop with micrometer adjustment - Fixed steady rest - 300 mm - Taper sleeve for main spindle MK 6 - Live center (center point) MK 6 Bedways in excellent condition!

Sąlyga: naudotas, Gamybos metai: 1952, Technical details: Swing diameter over bed: 1000 mm Swing diameter over cross slide: 520 mm Turning length: 2500 mm Cross slide travel in z-axis (plan): approx. 500 mm Top slide travel in z-axis: approx. 300 mm Centre height: 300 mm Spindle bore: 90 mm Speed range: 3.2 – 382 / 22 steps rpm Feed range x-direction (longitudinal): 0.213 – 2.67 / 36 steps m/min Feed range y-direction (transverse): 0.070 – 1.11 / 36 steps m/min Tailstock quill taper: MK 6 Total power requirement: 22 kW Nedpfx Afsu Tq U Is Ijkt Approx. machine weight: 8.2 t Approx. machine dimensions (LxWxH): 5.3 x 1.6 x 1.6 m Transport dimensions: approx. 5.5 x 1.7 x 1.6 m Equipment: Face plate Ø 1000 mm 4-way tool post Steady rest Ø 250 mm, closed Accessories: Four-jaw chuck Ø 630 mm

Gamybos metai: 1965, Sąlyga: naudotas, Pressure: 150 t Throat depth: 550 mm Stroke: 10 - 140 mm Table area: 1180 x 980 mm Strokes per minute: 40 spm Installation height: 500 mm Ram area: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirement: approx. 3 x 1.7 x 3 m Nkjdpfx Aocubatjf Ist - with auxiliary brake - Ram weight compensation - Motorized ram adjustment - Centralized grease lubrication (manual) - Break-out plate - T-slot clamping plate - Safe for manual loading operations - Operating manual available

Sąlyga: geras (naudotas), sukimosi skersmuo virš skersinio stumduko: 380 mm, veleno skylė: 70 mm, tekėjimo skersmuo: 640 mm, tekinimo skersmuo virš slankiojančio stalo: 900 mm, Specifications: Nodpfx Afeudh Sls Ijkt Distance between centers: 2,000 mm Swing over bed: 640 mm Swing over carriage: 380 mm Swing over gap: 900 mm Spindle bore: 70 mm Includes: 400 mm 3-jaw chuck 390 mm 4-jaw independent chuck Steady rest (open type) and follow rest (closed type) Quick-change tool post with 4 tool holders.

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, tekėjimo skersmuo: 1 000 mm, tekėjimo ilgis: 8 000 mm, bendras ilgis: 10 500 mm, For sale is a used lathe from the Italian manufacturer Leopolod Pontiggia, model NH 500. Technical specifications: Swing over bed: 1,000 mm Turning length: 8,000 mm Extensive equipment as shown in the photos: Nodpfx Aev Epigef Iokt 1 x 3-jaw chuck 1 x 4-jaw chuck 1 x steady rest + Various adapters

Sąlyga: naudotas, Swing diameter / mm Turning length / mm Swing diameter over cross slide / mm Technical Data – Model 230 DIMENSIONS Nsdpfx Aswz Rywjf Iokt Center height above bed: 230 mm Distance between centers: 1000–1500 mm 2000–2500 mm 3000 mm Bed width: 360 mm Maximum turning diameter: over bed: 465 mm over cross slide: 278 mm over fixed steady rest: 200 mm over traveling steady rest: 160 mm SWING GAP Gap width: 300 mm Distance from faceplate edge to gap: 150 mm Maximum turning diameter in gap: 690 mm SPINDLE Front bearing Ø (inner): 110 mm Rear bearing Ø (inner): 95 mm Spindle bore Ø: 77 mm Mounting type - Cam Lock: 6" Spindle internal taper: 1:20 Spindle taper – Morse: No. 5 Spindle speed ranges: Low range – rpm: 15–1000 Medium range – rpm: 22–1500 High range – rpm: 30–2000 FEEDS (without gear change) – No.: 108 Longitudinal feed range per revolution: 0.04–4 mm Cross feed range per revolution: 0.02–2 mm Leadscrew Ø: 40 mm Leadscrew pitch: 12 mm THREAD CUTTING (without gear change) Metric – No. 54: 0.5–28 mm Module – No. 54: 0.25–14 Whitworth – No. 54 per inch: 56–1 Diametral Pitch – No. 54: 112–2 Inch (imperial) – No. 54: 1/32–13 3/4" TAILSTOCK CENTER Quill Ø: 75 mm Quill travel: 220 mm Quill taper – Morse: No. 5 PERFORMANCE Main motor – HP: 10 Pump motor – HP: 0.25 WEIGHT approximately 2,920 kg

Sąlyga: naudotas, Gamybos metai: 1968, Hilgeland deburring press ME2 VM for sale. Nkjdpfxeur N Ewj Af Iet

Sąlyga: geras (naudotas), Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 10279, sukimosi skersmuo virš skersinio stumduko: 200 mm, veleno skylė: 35 mm, tekėjimo skersmuo: 300 mm, centro aukštis: 150 mm, tekėjimo ilgis: 750 mm, bendras ilgis: 1 860 mm, bendras plotis: 700 mm, bendras aukštis: 1 800 mm, veleno greitis (maks.): 2 800 aps./min, veleno greitis (min.): 40 aps./min, bendras svoris: 1 030 kg, - Operating voltage: 380 V - Connected load: 3 kW - Rated current: 25 A - Frequency: 50 Hz Nodpfx Afjv Irgto Iskt Equipment: - Tailstock - Multifix Type B toolpost - Three-jaw chuck (diameter: 160 mm) - 2-axis digital readout by RSF

Sąlyga: naudotas, Gamybos metai: 2009, Spindle head diameter: 75 mm Spindle taper: Morse 5 Nodpfx Aovwbccsf Iskt Spindle stroke: 350 mm Min./max. offset from column outer surface to spindle axis: 1170/2070 mm Min./max. radius at extreme spindle positions: 1370/2270 mm Min./max. distance from spindle head in vertical position (with spindle retracted) to floor: 305/1555 mm Min./max. distance from spindle axis in horizontal position to floor: 295/2725 mm Vertical arm adjustment (stroke): 1250 mm Horizontal arm movement (travel): 900 mm Arm rotation: 360° Spindle head rotation: 360° Swivel angle of spindle head with spindle housing up/down from horizontal position: 90° / 90° Saddle travel on bed (extended): 2500 mm Column diameter: 400 mm

Sąlyga: naudotas, Funkcionalumas: nepatikrintas, veleno skylė: 81 mm, tekinimo skersmuo virš slankiojančio stalo: 650 mm, centro aukštis: 320 mm, tekėjimo ilgis: 1 500 mm, Used lathe, see pictures. Equipped with Sony digital display and 660 mm faceplate. Year of manufacture: 1976. All technical specifications can be found in the last image. IMPORTANT: The nameplate indicates XD500, but based on dimensions and delivery note, it is actually an XD630. Nksdpfx Aowm Rvisf Iet Centre distance: 1500 mm Bed length: 2500 mm Centre height: 320 mm Includes taper turning attachment and side/ruler scale.