Vertikalus apdirbimo centras

Hartford LG800S

Sąlyga: naudotas, Gamybos metai: 2006, X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Control unit: MSX 501 Mori Seiki Table clamping surface: 700 x 450 mm Max. table load: 350 kg Number of T-slots: 4 T-slot width: 18 mm T-slot spacing: 100 mm Spindle speed: 12,000 rpm Main spindle drive power: 18.5 / 15 / 11 kW Tool holder: BT 40 Max. torque: 110.5 Nm Front milling spindle bearing diameter: 70 mm Rapid traverse (X/Y/Z): 20,000 mm/min Feed rate: 1 - 20,000 mm/min Fine feed rate: 15 steps / 0 - 1,260 mm/min Magazine capacity: 40 positions Max. tool width: 80 mm Max. tool diameter (adjacent slots empty): 125 mm Max. tool length: 250 mm Max. tool weight: 8 kg Chip-to-chip time: 2.8 sec Ihodov Az Ucepfx Af Iet Tool-to-tool change time: 1.0 sec Total power requirement: 34 kVA Machine weight: approx. 7.2 t Footprint: approx. 2.8 x 3.0 x 2.9 m Vertical machining center MORI SEIKI - NV 4000 DCG - approx. 14,000 operating hours

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, - USADA - CURVADORA DE TUBOS EJES: 3 Ihodjvhc Uuopfx Af Iet DIÁMETRO MÁXIMO DEL TUBO: 30 x 2 mm LONGITUD DE TRABAJO: 3.000 mm VELOCIDAD DE POSICIONAMIENTO EJE X: 900 mm/seg VELOCIDAD DE CURVADO EJE Y: 200°/seg VELOCIDAD DE GIRO EJE Z: 360°/seg RADIO MÁXIMO DE CURVADO: 20 A 170 mm UNIDAD DE CONTROL: DNC800

Sąlyga: naudotas, Gamybos metai: 2001, x-axis travel: 2050 mm y-axis travel: 1100 mm z-axis travel: 800 mm Control: Fanuc 18iM Super Cap II Spindle speed: 60-6000 rpm Tool magazine: 60 positions Tool holder: BT50 Total power requirement: 26 kW Machine weight approx. 23.6 t Space requirement approx. 6.3 x 3.3 x 3.8 m The machine will be available for loading from 03/2024! Ihjdpfx Afjrw Dkns Iet Description X-axis: 2050 mm, Y-axis: 1100 mm, Z-axis: 800 mm, Spindle speed: 60-6000 rpm, Number of tool stations: 60, Tool magazine: BT 50, Drive power: 22/26 kW, Table pitch: 250 mm, Control: FANUC 18iM Super CAP II with 10.4-inch display, Length: 6250 mm, Width: 3300 mm, Height: 3800 mm, Weight: 25 t, with High Precision Contour Control, Central lubrication extension (2005), axis upgrade (X-Y-Z) to linear scales (0.001 mm), Memory expansion 128 KB, tool compensation memory (200 pcs), High Speed Remote Buffer, Extraction via HEPA filter system, upgrade to high-pressure internal coolant supply 20 bar, and zero-point clamping system with 16 pots each.

Sąlyga: naudotas, Gamybos metai: 2003, Technical details: Bar diameter: 13 mm Turning length: 205 mm Spindle speed: 12,000 / 12,000 rpm Number of tools: 29 Driven tool stations: yes / 19 Isdpfx Afsvivygs Isht Control unit: FANUC 16 iT Total power requirement: 9 kVA Machine weight approx.: 1.7 t Required floor space approx.: 2.7 x 1.4 x 1.7 m CNC Swiss-type lathe Sub-spindle, 9 axes (X / C1 / Y / E / B / A / X / C2) Main spindle, max. speed 12,000 rpm, C-axis Sub-spindle with collet chuck, max. speed 12,000 rpm, C-axis 4-position tool holder 3 cross-drilling units Turret with 8 stations Various additional tool holders, quills Kraft und Bauer extinguishing system High-pressure system SF-Systeme Büchele / SHD 150 / 150 bar / 2 x 40 μm / 3 valves Parts conveyor belt Operating manuals (operation/programming/electrics/spare parts) Machine operating tools Up to 29 turning tools and up to 19 driven tools possible 9.0 kVA Tank capacity 170 L Bar feeder FMB Turbo 2-16 / 3200 / A / for Ø2-Ø20 mm Coolant used by the machine: oil Machine dimensions: approx. 2700 x 1400 x 1700 [mm] Machine weight: approx. 1700 [kg] Bar feeder dimensions: approx. 4300 x 600 x 1800 [mm] Bar feeder weight: approx. 700 [kg] Dimensions of peripheral high-pressure system: approx. 1500 x 500 x 1000 [mm] Weight of peripheral high-pressure system: approx. 250 [kg] Dimensions of peripherals & accessories: approx. 1200 x 800 x 1000 [mm] Weight of peripherals & accessories: approx. 200 [kg] Dimensions of peripherals & accessories: approx. 1200 x 800 x 1000 [mm] Weight of peripherals & accessories: approx. 200 [kg]

Sąlyga: geras (naudotas), Gamybos metai: 2000, Staklės parduodamos be įrankių laikiklių ir jokios papildomos įrangos. Ranka parodytos dalys nepridedamos. Techninės detalės pavaizduotos nuotraukoje. Ihjdpfow Tc S Usx Af Ijt

Sąlyga: paruoštas naudoti (naudotas), Travel X/Y/Z: 1000mm/800mm/500mm, speed: 15,000 rpm, tool holder: SK40, tool positions: 30, spindle power: 15kW, table dimensions X/Y: 1250mm/800mm, max. table load: 1200kg. Machine dimensions X/Y: approx. 5000mm/3000mm, weight: approx. 12,000kg. The machine has a spindle defect. Documentation available. Inspection on site is possible. Ihsdpfxjup Egxo Af Iet

Sąlyga: geras (naudotas), Gamybos metai: 2003, Gera būklė, funkciniai paviršiai, matavimo svirtis. Ihodpfx Afowybg Sj Ijt Rankoje laikomos dalys nepridedamos. Techninė informacija matoma nuotraukose.

Sąlyga: naudotas, Gamybos metai: 2003, Didžiausias tekinimo skersmuo: 420 mm Ihsdpfx Aeucgylsf Iet Tekinimo ilgis: 1090 mm Valdymas: FANUC serija 18i-TB Tekinimo veleno prasiliejimas: 108 mm Griebtuvas: 250 / 315 mm Sukimosi greičio diapazonas: 0-3750 aps./min Pasislinkimo greitis: 18/24 m/min Įrankių kiekis: 12 Zylindro eiga: 100 mm Zylindro diametras: 110 mm Kūgio laikiklis: MK 4 Varomų įrankių kiekis: 12 mm Varomo įrankio sukimosi greitis: 3000 aps./min Sukimo momentas: 22 Nm Aušinimo skysčio talpa: 140 l Bendra galios paklausa: 22/18,5 kW Staklių svoris: apie 6500 kg Cilindrinis kotas DIN 69880: VDI 50 Strypų apdirbimas: Ne Detalės apdirbamos per griebtuvą: Taip Hidraulinės atramos vidinis diametras: Dm 20-165 mm

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 450 mm, veleno greitis (min.): 25 aps./min, veleno greitis (maks.): 6 000 aps./min, X ašies eiga: 213 mm, Z ašies eigos atstumas: 450 mm, greitas poslinkis X ašimi: 24 m/min, greitasis eiga Z ašyje: 30 m/min, strypo praėjimas: 65 mm, CNC Siemens 840 D Working Area Max swing diameter over bed: 505 mm Swing diameter over X-slide: 375 mm Chuck diameter: 210 mm Bar capacity: 65 mm Cross travel (X): 213 mm Longitudinal travel (Z): 450 mm Feed Rates Rapid traverse X/Z axes: 24/30 m/min Ihedjw Adhwepfx Af Iet Main Spindle Spindle nose (flat flange): 140 h5 mm Front bearing diameter: 100 mm Main Spindle Spindle motor power (40/100% DC): 16/12 kW Torque (40/100% DC): 153/115 Nm Spindle speed: 25 - 6000 rpm Tool Turret Number of tool positions: 12 Number of driven positions: 12 Shank diameter (DIN 69880): 30 mm Driven tool motor power (40% DC): 9 kW Max. torque (40% DC): 20 Nm Max. speed: 4500 rpm Tailstock Automatic tailstock travel: 450 mm Quill taper: MT 4 Max. tailstock thrust: 400 daN Machine Equipment: • Chip conveyor • Fume extraction prep • 2 axial driven tool modules • 4 radial driven tool modules • Fixed tool holders

Sąlyga: naudotas, Gamybos metai: 2006, Tekėjimo skersmuo Ø30/300 mm Tekėjimo ilgis 3055 mm +/-0,3 mm Ihjdpfx Afougnxdj Iet