Vertikalus revolverinis tekinimo staklės

HANKOOK VTC-200E HANKOOK VTL with C Axis RAM Typ

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2000, Pressure 105 t Bending length 3100 mm Distance between uprights 2600 mm Table width 100 mm Table height 750 mm Control system DELEM DA 65 Installation height 200 mm Working speed 0 - 10 mm/sec Return speed 0-100 mm/sec Kjdpfx Aevq R Uuobrjdh Rapid traverse upward max. 100 mm/sec Power supply 380 V / 50 Hz Total power requirement 11 kW Machine weight approx. 7.5 t Space requirement approx. 4 x 2.2 x 2.8 m Equipment: - CNC control DELEM DA65 graphic video - Controlled back gauge, 2 axes - New lower tool - Two-hand control / foot switch

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. Both powerful spindles offer a 66 mm bar passage; two turrets each have 12/24 tool stations with driven tools rated at 14 kW and 12,000 rpm. Y-axis available on both upper and lower turrets. The machine is fitted with a 35-bar high-pressure coolant system including a filtration unit and an additional tank. For further information regarding this lathe, please refer to the attached brochure or contact us directly. Equipment: - LPS for left spindle - Reducing tube for left spindle Kedpfx Ajxmhdnsbrodh - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 cooling unit for coolant – 8000W - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable, automatic parts catcher (pneumatic) - Part remover equipped with a pneumatic gripper for taking out finished workpieces - Pneumatic ejector for sub-spindle with 100 mm adjustable stroke; end position monitored by sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction system, connection flange Ø100 The machine is fitted with a chip conveyor, coolant unit, and tooling package. The machine can be inspected under power and is available immediately. Only operated in single-shift mode. Further information available upon request.

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machining length: 200 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 8,000 [rpm] - Spindle drive power: 1.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 Kdsdpfxeuhazge Abrjh - Number of positions: 10 - Number of live tool positions: 5 - Driven tool speed: 5,000 [rpm] FRONT TOOL POST - Number of positions: 4 SUB SIDE MACHINING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 [V] DIMENSIONS AND WEIGHT - Installation space: 2,110 x 1,085 [mm] - Machine height: 1,832 [mm] - Machine weight: 2,200 [kg] MACHINE HOURS - Operating hours: 32,264 [h] EQUIPMENT - Control: Meldas - Driven guide bushing - Parts catcher - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Bar feeder: FMB MINIMAG 20

Gamybos metai: 2012, Sąlyga: geras (naudotas), Muratec MW120 GT eladó Használt, kiváló állapotban. Kodpfjifi D Tex Abrjdh A gép előzetes egyeztetés alapján megtekinthető. A szállítás a vevő felelőssége, de igény esetén segítünk a csomagolásban és a rakodásban. Szállítás: EXW Székesfehérvár

Gamybos metai: 2007, Sąlyga: naudotas, mašinos/transporto priemonės numeris: 46650051, Horizontal machining center with multipallet + B39 NIIGATA SPN 501-P8 FANUC 18I-MB Accessories: Chip conveyor High-pressure cooling system through the spindle line Kdjdjgay Evopfx Abrsh

Sąlyga: naudotas, Gamybos metai: 1969, Wheel diameter - max. 160,175 mm Wheel width 355 mm Module - max. 4.5 Spindle bore 75 mm Centres distance 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Centre distance between cutter and workpiece - max. 138 mm Centre distance between cutter and workpiece - min. 30 mm Milling head - swiveling 120° Cutter speeds 70 - 400 rpm Axial feed rates 0.25 - 4.0 mm/rev Radial feed rates 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Kjdevzhf Sepfx Abrsdh Space requirement approx. 1730x1400x1440 mm Equipment/Accessories: - Change gears - Milling arbors - Clamping devices - Documentation

Sąlyga: geras (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, GEBRAUCHT Soraluce Soramill Modell SP 10000 Portalfräsmaschine, Tischtyp, mit CNC-Steuerung, Verfahrsäule, automatischem ölnebelschmierten orthogonalen Fräskopf mit 1 x 1 Grad Indexierung und HEIDENHAIN TNC 430 M Steuerung. Baujahr 2002, SN 8647. Tischfläche: 10.000 x 1.100 mm X-Achse (Längsverfahrweg): 8.500 mm Y-Achse (Vertikalverfahrweg): 1.600 mm Z-Achse (Ram-Verfahrweg): 1.200 mm Spindelmotor: 28 kW Spindelaufnahme: Standard ISO 50, BT50 Zugbolzen: DIN 69872-Form A, ISO 7388/2-Form A Unabhängiges 2-stufiges Getriebe Drehzahlbereich: 20–4.000 U/min Vorschubbereich: 5–5.000 mm/min Eilgang (X, Y, Z): 15.000 mm/min Präzisions-Kugelgewindetriebe mit vorgespannten Doppelmutter-Systemen in allen Achsen. Linearführungssystem mit umlaufenden Zylinderrollen und Stahlführungsbahnen in X-, Y- und Z-Achse Unabhängige AC-Servomotoren pro Achse Wegmesssysteme (Glasmaßstäbe) in X, Y und Z mit Luftspülsystem Automatische Werkzeugklemmung und hydraulisches Werkzeugwechselsystem CNC-Steuerung: HEIDENHAIN TNC-430-M (Flacher TFT-Monitor, digitale Antriebe) 9 Achsen CNC, 1 Spindel, davon 5 Achsen simultan interpolierend Arbeitsbereichsbeleuchtung Klimatisiertes Schaltschrankkühlsystem Schaltschrankinnenbeleuchtung Heidenhain HR410 Fernbedienung mit 3m Spiralkabel Horizontal schwenkbares Bedienpult für CNC Orthogonalkopf 28 kW, 800 Nm, 1° x 1°, 4.000 U/min Ölschmierung. Preis inkl. Öl-Kühleinheit für Kopf und Getriebe. Option G2 (Ram für 4.000 U/min vorbereitet) enthalten. Spindelkühlsystem (AD-Typ) integriert. Kühlsystem mit 500l-Tank, zwei Pumpen für Niederdruck (3 bar) und Hochdruck (8 bar), Förderleistung 50 l/min, inkl. kombinierter Papier-/Magnettrommelfiltereinheit. Bedienerplattform fest an der Säule verbaut Werkzeugmagazin für 40 Werkzeuge, BT50 Max. Werkzeuglänge: 400 mm Max. Werkzeugdurchmesser: Voll bestückt = 120 mm, mit Nachbarfach frei = 250 mm Max. Werkzeuggewicht: 20 kg Mittleres Werkzeuggewicht (voll bestückt): 10 kg Maximales zulässiges Gesamtgewicht: 20 kg Späneförderer / Scharnierbandförderer Maschinenvorbereitung für die Nachrüstung eines 4. Achsen Elektro-Mechanik-Drehtisches Spritzschutz an der Stirnseite und beiden Seiten des Tisches, bestehend aus vier verschiebbaren Fronttüren (Höhe ab Boden 2.100mm, Länge je 1.700mm). Türen manuell bedienbar, mechanische Verriegelung, öffnen über gesamte Längsverfahrstrecke möglich. Tischrückseite offen. Schutzverkleidung an der Rück- und beiden Längsseiten der Maschinensäule. Ksdpfx Abjr Hr Arsrjdh

Sąlyga: naudotas, Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 0728, X = 5,000 mm Y = 1,025 mm Z = 1,100 mm / horizontal Z = 1,000 mm / vertical - NC swiveling head continuously adjustable +/- 105 degrees as a CNC axis for horizontal and vertical machining, indexing accuracy +/- 5 arcseconds - Heidenhain iTNC530 control, hard disk with approx. 21 gigabytes available for user data - Motor spindle HSK100, speed range 20-8,000 rpm, drive power 44 kW, 350 Nm - NC rotary table SKH 4/630 Faceplate horizontal Faceplate diameter 630 mm Standard overall height 300 mm Indexing accuracy +/- 12 arcseconds Maximum load 900 kg Max. tangential torque at 63 bar: 2400 Nm Including motor (AC) with integrated rotary measuring system and hydraulic clamping, incl. additional CNC axis - NC rotary table SKH-NC 9/1450 Faceplate horizontal Faceplate diameter 1450 mm Indexing accuracy +/- 12 arcseconds Without direct measuring system Maximum load 5,000 kg Max. tangential torque with clamping: 16,000 Nm Including motor (AC) with integrated rotary measuring system and hydraulic Kedoxgnfxopfx Abrodh clamping, incl. additional CNC axis Special enclosure for rotary table diameter 1450 mm included Swing diameter 1500 mm No turning operation possible! - 60 tool stations - Fully enclosed work area with roof - Bellows with steel lamellae - Direct measuring system for NC rotary table Indexing accuracy +/- 5 degrees - Direct linear measuring systems X, Y, Z axes - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting, 6-fold - Installation elements - 3D probing system with wireless connection - Tool probing system for measuring and checking cutting tools in the machine, TT140 - Zero-point clamping system Unilok ESM 130 36 pcs integrated in the machine table 16 pcs integrated in rotary table faceplate with diameter 1450 mm 4 pcs integrated in rotary table faceplate with diameter 630 mm

Sąlyga: naudotas, Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 650 mm, Z ašies eigos atstumas: 550 mm, sukimosi greitis (maks.): 12 000 aps./min, bendras svoris: 7 500 kg, For sale: CNC 5-axis machining center from DMG, model DMU 60 P The machine is fully functional and ready for immediate operation. In 2021, a new spindle was installed and all maintenance work was carried out. Service history: 2019: New ballscrew (KGT) 2021: New spindle 2022: Operated in single-shift operation 2023: Occasional job orders 2024: Taken out of service but still powered 12/2025: Disassembled, cleaned, and stored Technical data: X travel: 600 mm Y travel: 650 mm Z travel: 550 mm Control: Heidenhain TNC 426 Spindle speed range: max. 12,000 rpm Spindle drive power: 15 kW Max. torque: 130 Nm Tool holder: SK 40 Table diameter: 630 mm Max. table load: 500 kg Number of tool stations: 60 Max. tool length: 350 mm Kdedpfx Abowbhq Hjrsh Rapid traverse (X/Y/Z): 24 m/min Feed rate: 20 - 10,000 mm/min Total power requirement: 44 kVA Floor space requirement (approx.): 7.0 x 6.0 x 2.7 m Machine weight (approx.): 7.5 t No fixtures or vises included in the offer. Transport and loading can be organized Europe-wide upon request and at an additional cost. Prices are subject to VAT. Inspection possible by appointment. Please contact us – our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase/sale PURCHASE/SALE OF MANUFACTURING & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell your machine? For further information or contact options, please visit our website.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, X ašies eiga: 2 050 mm, Y ašies eiga: 850 mm, Z ašies eigos atstumas: 750 mm, įrankių magazino lizdų skaičius: 36, stalo ilgis: 2 200 mm, stalo plotis: 850 mm, valdiklio modelis: OKUMA-OSP-HMI, aušinimo skysčio tiekimas: 15 juosta, atstumas nuo stalo centro iki veleno galo: 950 mm, ašies variklio galia: 22 W, ašies skaičius: 36, greitasis eiga Z ašyje: 16 m/min, greitas poslinkis X ašimi: 16 m/min, greitas poslinkis Y ašis: 16 m/min, veleno nosis: BT 50, veleno greitis (maks.): 10 000 aps./min, veleno greitis (min.): 50 aps./min, stalo apkrova: 2 500 kg, įrankio skersmuo: 120 mm, įrankio ilgis: 400 mm, įrankio svoris: 20 g, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, 3-axis vertical machining center with OKUMA-OSP-HMI CNC Kdjdpfxju Dinko Abreh