Apdirbimo centras - universalus

GROB G550

Sąlyga: naudotas, Gamybos metai: 2019, x-axis travel: 800 mm y-axis travel: 950 mm z-axis travel: 1020 mm Control: TNC640 B-axis: 360 x 0.001° A-axis: -185 / +45 x 0.001° Feed rate X-axis: 1 - 65,000 mm/min Feed rate Y-axis: 1 - 50,000 mm/min Feed rate Z-axis: 1 - 80,000 mm/min Rapid traverse X/Y/Z: 60 / 50 / 80 m/min Spindle speed - stepless: 1 - 16,000 rpm Drive power 100% duty cycle: 25.00 kW Drive power 40% duty cycle: 32.00 kW Torque at 40% / 100% duty cycle: 206.00 / 159.00 Nm Tool holder: HSK-A63 Tool magazine: 70 positions Max. tool length: 500 mm Tool diameter: 118 mm Tool diameter with free adjacent pockets: 260 mm Total tool weight: 22.00 kg Chip-to-chip time: 4.2 sec Pallet size: 630 x 630 mm Work area diameter: 900 mm Total power requirement: 35.00 kW Machine weight: approx. 25.00 t Space requirement: approx. 7.00 x 3.50 x H3.50 m Kodpfxexn Amae Acusdu 5-axis machining center with Heidenhain TNC640 control, integrated KNOLL KF220 coolant system, high-pressure coolant supply 23 bar, internal coolant supply, chip conveyor, Heidenhain TS640 measuring probe, GROB spindle diagnostics, electromechanical tool length measurement, BLUM laser for tool monitoring, tool cleaning unit, kinematics set.

Sąlyga: naudotas, Gamybos metai: 2014, Technical Details: x-axis travel: 800 mm y-axis travel: 950 mm z-axis travel: 1020 mm Control: Sinumerik 840D sl MDynamics Operate Speed: 10,000 rpm Spindle power: 26/20 kW Spindle torque: 340/262 Nm Tool holder: HSK-A 100 Tool changer: 120 (2x60) positions Pallet changer, double: 630 x 630 mm Table load capacity: 800 kg Machine weight approx.: 20 t Space requirement approx.: 3.3 x 6.15 x 3.2 m 6-axis simultaneous horizontal machining center with controlled rotary/swivel table (A/B axis) The B axis has a swivel range of 180°, which means the part can be machined overhead, allowing chips to fall freely downward. U-axis = CNC-controlled radial movement of the tool, enabling different diameters of a bore to be machined with a single tool in one operation. Double pallet changer, pallets 630 x 630 mm 6-way hydraulic feed to pallets with coupling mechanisms, rotary unions in A and B axes, Special hydraulic pump system. ICS (internal coolant supply) (10–80 bar), one clamping channel in the work area with proportional valve 10–200 bar Electromechanical tool length measurement device by GROB BLUM laser for tool monitoring Tool coding Chip conveyor 3D touch probe M&H Oil mist extraction Siemens HT8 electronic handwheel Rinsing gun Coolant flushing in the work area Air gun Oil skimmer Kdsdpfx Aoxix Atscuou Automatic door Remote diagnostics The price includes a 6th axis MAPAL Tooltronic with 2 U-axis heads: 1. LAT125-HSK100 2. LAT160-HSK100

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2020, veikimo valandos: 8 700 h, Steuerungseinheit Marke: HEIDENHAIN Modell: TNC 640 Ksdpfxsxfw A Do Acujdu Verfahrwege X-Achse: 800 mm Y-Achse: 950 mm Z-Achse: 1020 mm Zusätzliche Ausstattung Zubehör: Zusätzliche Palette + Kühleinheit für Kühlmittel Dieses 5-Achs-GROB G550a Universal-Bearbeitungszentrum wurde 2020 gefertigt. Es bietet fortschrittliche Möglichkeiten für komplexe Bearbeitungsaufgaben. Nutzen Sie die Gelegenheit, dieses GROB G550a Universal-Bearbeitungszentrum zu erwerben. Kontaktieren Sie uns für weitere Informationen. Anwendungsbereiche Fräsen

Sąlyga: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2019, mašinos/transporto priemonės numeris: S216405501002, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas,

Sąlyga: geras (naudotas), Gamybos metai: 2012, Control: Heidenhain iTNC 530 Working area: 800 mm x 1020 mm x 970 mm (X/Y/Z) Table dimensions: 630 x 630 mm Table load capacity: 700 kg Maximum workpiece diameter: 900 mm Rotary table (A/B axis) A-axis: -185° / +45° B-axis: 360° Total power requirement: 42 kVA Machine weight approx.: 22 t Chip conveyor Belt filter system Kedpfx Acjrx N Tzouodu Motor spindle: 16,000 rpm Drive power: 25/35 kW Max. torque: 160/223 Nm Spindle interface: HSK-A63 Tool changer: 120 positions - Probe - Kinematics package - Tool length measurement system - BLUM laser measuring system for tool monitoring - Electronic handwheel - Extraction system - 80 bar coolant through spindle system

Sąlyga: naudotas, Gamybos metai: 2014, Technical details: x-axis travel: 800 mm y-axis travel: 950 mm z-axis travel: 1020 mm Control unit: Sinumerik 840D sl MDynamics Operate Spindle speed: 10,000 rpm Spindle power: 26/20 kW Spindle torque: 340/262 Nm Tool holder: HSK-A 100 Tool changer: 120 positions (2x60) Pallet changer, dual: 630 x 630 mm Table load capacity: 800 kg Machine weight approx.: 20 t Required floor space approx.: 3.3 x 6.15 x 3.2 m 6-axis simultaneous horizontal machining center with controlled rotary-swivel table (A/B axis) Ksdjwr Du Njpfx Acuodu The B axis has a swivel range of 180°, which means the component can be machined overhead, allowing chips to fall freely downward. U-axis = CNC-controlled radial movement of the tool, enabling various bore diameters to be machined with a single tool in one operation. 2-station pallet changer, pallets 630 x 630 mm 6-way hydraulic supply to pallets with coupling mechanisms, rotary feedthrough in A and B axis Special hydraulic pump system ICS (internal coolant supply, 10–80 bar), One clamping channel in the working area with proportional valve 10–200 bar electromechanical tool length measuring device by GROB BLUM laser tool monitoring system Tool coding Chip conveyor 3D probe, M&H Oil mist extraction Electronic handwheel Siemens HT8 Rinsing gun Coolant rinsing system in the work area Air gun Oil skimmer Automatic door Remote diagnostics KOMET Komtronic U-axis with 2 units: 1. UAS 160-HSK100-E-Z50-1 with 50 mm stroke 2. Special UAS 160-HSK100-E-Z-32-1 with 32 mm stroke *

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: U255805501002, X ašies eiga: 800 mm, Y ašies eiga: 950 mm, Z ašies eigos atstumas: 1 020 mm, valdiklių gamintojas: HEIDENHAIN, valdiklio modelis: iTNC 530, veleno greitis (maks.): 12 000 aps./min, aušinimo skysčio tiekimas: 23 juosta, įrankių magazino lizdų skaičius: 60, įėjimo įtampa: 400 V, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Highlights: - Geometry refurbished - A/B axes refurbished - Ready 2 Go ___ Base machine G550 AB Generation 0 Travel X-axis: 800 mm Travel Y-axis: 950 mm Travel Z-axis: 1020 mm Power supply: 400 V, 50 Hz, TN-S Compressed air system, operating pressure 5 bar, minimum input pressure 5 bar Kdodpjw El N Iofx Acuju Decentralized work area extraction Work area door, manually operated, for manual loading/unloading Machine control: HEIDENHAIN iTNC 530 Swivel table (A'-axis) Rotary table with T-slots (B'-axis) Motor spindle HSK-A 63, 12,000 rpm, 64/83 Nm, 40/52 kW Single-disc magazine HSK-A 63 with 60 tool positions Tool cleaning device Electromechanical tool length measuring system Coolant high-pressure system (23 bar, through-spindle coolant) Coolant low-pressure system Coolant circulation for weekends Oil skimmer for coolant maintenance Blow gun at the work area Rinse gun at the work area Work area lighting Machine paint finish according to GROB standard Machine cooling system with air-cooled chiller Operating/environmental conditions according to GROB standard Electrical equipment according to GROB EU standard Kinematics optimization with KinematicOpt Infrared probe OMP60 (RENISHAW) Remote machine diagnostics 3-month warranty

Sąlyga: naudotas, Gamybos metai: 2011, Technical Details: x-axis travel: 800 mm y-axis travel: 950 mm z-axis travel: 1020 mm Control: Sinumerik 840D sl MDynamics Operate Speed: 10,000 rpm Spindle power: 26/20 kW Kdodpfxjwr Drno Acuju Spindle torque: 340/262 Nm Tool holder: HSK-A 100 Tool changer: 120 (2x60) positions Pallet changer, double: 630 x 630 mm Table load capacity: 800 kg Machine weight approx.: 20 t Space requirement approx.: 3.3 x 6.15 x 3.2 m 6-axis simultaneous horizontal machining center with controlled rotary/swivel table (A/B axis) The B axis has a swivel range of 180°, which means the part can be machined overhead, allowing chips to fall freely downward. U-axis = CNC-controlled radial movement of the tool, enabling different diameters of a bore to be machined with a single tool in one operation. Double pallet changer, pallets 630 x 630 mm 6-way hydraulic feed to pallets with coupling mechanisms, rotary unions in A and B axes, Special hydraulic pump system. ICS (internal coolant supply) (10–80 bar), one clamping channel in the work area with proportional valve 10–200 bar Electromechanical tool length measurement device by GROB BLUM laser for tool monitoring Tool coding Chip conveyor 3D touch probe M&H Oil mist extraction Siemens HT8 electronic handwheel Rinsing gun Coolant flushing in the work area Air gun Oil skimmer Automatic door Remote diagnostics The price includes a 6th axis MAPAL Tooltronic with 2 U-axis heads: 1. LAT125-HSK100 2. LAT160-HSK100

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: N2495255010011, X ašies eiga: 800 mm, Y ašies eiga: 950 mm, Z ašies eigos atstumas: 1 020 mm, Highlights: - High-performance motor spindle with 16,000 rpm - Pallet clamping system - 90 tools in the system _____ Base Machine G550 access SERIES X-axis travel: 800 mm Y'-axis travel: 950 mm Z-axis travel: 1020 mm Kdjdevgalzjpfx Acusu Power supply: 400 V, 50 Hz, TN-S Decentralized work area extraction system: 800 m³ Stainless steel interior cladding for the work area Doors for fluid cabinet SIEMENS SINUMERIK 840D sl with GROB⁴Pilot Generation 2 machine control panel Tilting rotary table (A'-axis) Rotary table with pallet clamping system (B'-axis) HSK-A 63 motor spindle, 16,000 rpm, 159/206 Nm, 25/32 kW, oil/air lubrication Compact double-disc magazine HSK-A 63 with 90 tool stations Tool cleaning system Electromechanical tool length measurement system Pallet 630 x 630 mm, grid bore without drive lugs Scraper-belt chip conveyor, discharge height 1,100 mm High-pressure coolant system (5-40 bar, through-spindle coolant) Compressed air supply through spindle center Air blow gun at the working area Rinse gun at the working area Flush system (Z-axis) Compressed air cleaning rail for safety glass in work area door Remote machine diagnostics with access control switch 12-month warranty

Sąlyga: naudotas, Gamybos metai: 2013, Technical details: x-axis travel: 800 mm y-axis travel: 950 mm z-axis travel: 1020 mm Control: Sinumerik 840D sl MDynamics Operate Spindle speed: 10,000 rpm Spindle power: 26/20 kW Spindle torque: 340/262 Nm Tool holder: HSK-A 100 Tool changer: 120 positions (2x60) Pallet changer (2-fold): 630 x 630 mm Table load capacity: 800 kg Machine weight approx.: 20 t Space requirement approx.: 3.3 x 6.15 x 3.2 m 6-axis simultaneous horizontal machining center with controlled rotary-swivel table (A/B axis) The B-axis has a swivel range of 180°, i.e., the workpiece can be machined overhead, allowing chips to fall freely downward. U-axis = CNC-controlled radial movement of the tool, enabling machining of different diameters in a bore with a single tool in one operation. Double pallet changer, pallets 630 x 630 mm 6-fold hydraulic supply to pallets with coupling mechanisms, rotary feedthrough in A and B axes, special hydraulic pump system. ICS (10-80 bar), one clamping channel in the working area with proportional valve 10-200 bar electromechanical tool length measuring device GROB, BLUM laser for tool monitoring tool coding chip conveyor, 3D probe M&H, oil mist extraction, electronic handwheel Siemens HT8 rinse gun, coolant rinsing in the working area air gun oil skimmer, Ksdpfx Acswr Dt Sjuodu automatic door remote diagnostics KOMET Komtronic U-axis with 2 : 1. UAS 160-HSK100-E-Z50-1 with 50 mm stroke 2. Special UAS 160-HSK100-E-Z-32-1 with 32 mm stroke