Becentrinio šlifavimo staklės

GOZUA RHC 75 CF

Būklė: naudotas, Grinding diameter 350 mm Grinding length 600 mm Centre height 175 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore diameter 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swivels 360° Grinding spindle head swivels 180° ± Grinding spindle speed 1500, 1700, 2200 rpm Stepwise infeed 0–9.99 mm/ø Continuous infeed 0–9.99 mm/ø Table swivel ±10° Longitudinal table travel 1100 mm Table feed rate 0.02–6 m/min Workpiece weight between centres 130 kg Max. workpiece weight (supported) 130 kg including setup Max. cross travel 270 mm Internal spindle holder 80 mm Tailstock quill mount MK 3 Quill stroke 30 mm Total power requirement 6.5 kW Machine weight approx. 3.05 t Space requirement approx. 4 x 2 m Reconditioned according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine previously supplied with 1000 mm centres. -The operation via touch panel is extremely simple. -The symbols on the control panel are nearly identical to the original controls, so no retraining is required. -Diagnostic function with PLC fault display and digital I/O indication. -Dressing function can be extended or modified as per customer request. -Oriented spindle stop of the workpiece spindle available on request. -New maximum infeed amount 40 mm, can be further increased on request. -Digital display in 2 axes. X-axis resolution 0.5 µm Options: -Encoder with digital display in the workpiece headstock -Encoder with digital display in the grinding spindle headstock (height adjustment not possible with spindle) -New rigid internal grinding attachment, diameter 80 mm or 100 mm -Increase of centre height up to max. 225 mm -Speed control for the grinding spindle Included: -Operating tools -Clamping sleeve for chuck Additional accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid table traverse. Versatile use in production for external cylindrical and internal grinding, or for external, face, and internal grinding in one single setup of workpieces. Possible options: -Semi-automatic dressing cycles for external and internal grinding Codouxft Espfx Af Ajrb -Automatic dressing compensation -Measurement control Currently, the machine does not comply with the basic safety and protection requirements as specified in BetrSichV 2015. The necessary minimum protection targets must be determined by means of a risk assessment in accordance with BetrSichV.

Būklė: naudotas, Manufacturer: CINCINNATI Crjdpfowrpykox Af Asb

Būklė: beveik kaip naujas (naudotas), Profile grinding machine Utma model P20 Crsdpjff H E Rofx Af Aeb

Būklė: naudotas, Gamybos metai: 2001, Pressure 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system Total power requirement: 29 kW Machine weight approx. 9.5 t Required floor space approx. ... m Codpfx Afot Hw N Ts Aerb Quotation We are pleased to offer you—subject to prior sale and errors in technical data—from our stock: PROFIROLL - BAD DÜBEN (Germany) CNC Thread, Gear and Profile Rolling Machine Model ROLLEX, Year 2001 Steplessly adjustable rolling force from 0.2 to 40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Spindle drive: approx. 8.5 kW each Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features - The machine is equipped with a modern CNC control system developed by the manufacturer. Allows input of all relevant process and workpiece data, enabling fast and straightforward set-up for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. - Built-in (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device, prismatic pre-holders for positioning the workpiece before clamping, and a motorized (driven) tailstock center at the workpiece front. The stroke of the workpiece slide is approx. 500 mm—so the workpiece is clamped and moves hydraulically between the two rolling tools. - Cooling unit for hydraulic oil, separate electrical cabinet, CNC operating panel, etc. - Transparent safety covers in the working area. Central lubrication.

Būklė: geras (naudotas), becentrinio šlifavimo staklės Cjdpfx Afetrguvs Ajrb

Būklė: naudotas, Profilių šlifavimo staklės WICKMAN OPG Crjdpfx Aexbt Dpof Ajb

Būklė: naudotas, Šlifavimo skersmuo 250 mm Šlifavimo ilgis 500 mm Šlifavimo disko matmenys 400 x 50 mm Mūsų vertinimu, staklės yra geros naudotos būklės ir gali būti apžiūrimos su elektros įtampa susitarus dėl termino. Credjxzuylepfx Af Aeb Techninės savybės ir priedai: - Centro taurelė - įvairūs priedai Priedai, nuotraukose matomi įrankiai ir tvirtinimo priemonės į pristatymo apimtį įtraukiami tik tuo atveju, jei tai nurodyta papildomoje informacijoje. Techniniai duomenys, informacija gali būti keičiami ar atsirasti klaidų, taip pat galimas tarpinis pardavimas!

Būklė: naudotas, Gamybos metai: 1996, Technical details: Grinding diameter: 1.5 - 75 mm Grinding wheel diameter: 400 mm Grinding wheel width: 160 mm Working stroke: 0 - 1 mm Feed rate: stepless/continuous mm/min Grinding wheel speed: 1300 rpm CNC control: Num 1020 GC Total power requirement: 14 kW Machine weight approx.: 3.8 t Machine dimensions: 3.0x2.2x2.2 m Control cabinet dimensions (LxWxH): 1.5x0.4x2.0 m CENTERLESS EXTERNAL CYLINDRICAL GRINDING MACHINE for alloyed round steels, plunge-cut and through-feed grinding. - With the plunge-cut method, the maximum plunge length is 160 mm. Csdpfx Aeu Ngyzof Aorb - Automatic workpiece discharge via rail (the function/operation of which is not known to WMW AG) - Working grinding wheel with dressing device, speed = 1300 rpm. - Regulating wheel with dressing device, infeed angle right 0-6° and left 0-2°; wheel size 280x160 mm - Automatic grinding wheel balancing system Condition: Reference run not possible Machine does not operate in automatic mode Accessories: various grinding and regulating wheels available on request

Būklė: geras (naudotas), GENERAL CHARACTERISTICS Maximum grinding diameter: 120 mm Grinding wheel width: 250 mm Minimum grinding diameter: 1 mm Regulating wheel diameter: 304 mm Grinding wheel diameter: 508 mm DIMENSIONS AND WEIGHT Height: 1,700 mm Width: 1,500 mm Length: 2,750 mm Weight: 4,000 kg ELECTRICAL CHARACTERISTICS Grinding wheel head motor power: 15 kW Crsdpfx Afjrpnf As Ajb Workpiece headstock motor power: 1.8 kW Hydraulic motor power: 1.1 kW Total power: 20 kW Voltage: 220/380 V

Būklė: geras (naudotas), Atstumas tarp centrų: 1000 mm Centrų aukštis: 175 mm CNC prekės ženklas: FANUC Credpfxetrgn Tj Af Aeb CNC modelis: Oi-TD