Automatinis kelių suklių griebtuvas

GNUTTI FMO.9-125

Gamybos metai: 1987, būklė: naudotas, mašinos/transporto priemonės numeris: 7.0176, Note: We have 6 units of this machine in stock! Manufacturer: Gildemeister Model: GS 36 – 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11 t General / technical data: Portal 6-spindle automatic lathe Spindle pitch circle: 300 mm Number of longitudinal slides: 6 Number of cross slides: 2 Max. cross slide travel: 60 mm Max. longitudinal slide travel: 125 mm Spindle speeds: Infinitely variable 562 – 3373 rpm Main time range: Infinitely variable 1.95 – 78 seconds Secondary time range: 0.79 – 2.13 seconds Drive power: DC spindle motor 20 kW; feeds 8 kW Installation area: approx. 1720 x 4700 mm Note: The machine cannot be converted for bar work. Equipment: – 1 creep speed drive for setup operation – 1 automatic central lubrication system – 1 coolant system with piping and pump – 1 facing slide, position 3 (without cams) – 1 facing slide, position 5 – 6 longitudinal slides (without drive, without cams) – Feed for independent longitudinal slide, flexible, position 1–6 – Programmable logic controller IPC 620 – Noise protection measures 80db – Automatic feed re-engagement with electrical interlock for side door – Hinge belt chip conveyor – Machines equipped with DC drives for spindle speed and feed – KIENZLE terminal 2450-07 with signal interface and data transmission control Accessories: Electrical configuration: Dcodpfxoin Ub Tj Ab Hen The electrical equipment consists of a direct current main drive with 20 kW output for the spindle and a three-phase servomotor for the feed drive with an output of 8 kW (protection class IP 54), as well as the appropriate switching and control devices and all required installation. Total connected load of the machine: 32 kW/h.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1997, A rotary transfer machine for the production of ball sockets is available. Machining stations: 13, bar feeder: 0433, bar feeder length: 3000 mm, machine power: 40 kW, control system: Hydromat. Includes Bosch hydraulic unit, Knoll 450K-1 chip conveyor, Müller CL206-B coolant processing unit, and separate Knoll chip disposal. In 2015, the machine was upgraded for SW milling. Documentation is available. An on-site inspection is possible. Dsdpfxou T Rg Rj Ab Hocn

Būklė: naudotas, TECHNICAL DATA - Number of axes: 48 - Number of stations: 16 - Number of units: - Number of units possible horizontally: 16 - Number of units possible vertically: 7 - Max. diameter: 45 [mm] - Max. workpiece diameter: 150 [mm] - Base unit GM50/150: * Z stroke: 150 [mm] * Spindle power: 5 [kW] * Spindle speed: 0 - 8000 [rpm] - X/Y slides: * X travel: +/- 40 [mm] * Y travel: +/- 20 [mm] - Dimensions: 14,000 x 4,800 x 3,000 [mm] - Weight: 13 [t] - Operating hours: 4,283 [h] ACCESSORIES - CNC control Bosch Rexroth INDRAMOTION MTX-L85 - Station 1: * Sawing unit 52/100, 3 axes - Station 2: * Slide 50/150 (manual adjustment) ref. 22.10.002-1 * Unit 50/150 ref. 22.42.001-6 (1 axis) * IKZ (internal coolant supply) - Station 3: * Slide 50/150 (manual adjustment) ref. 22.10.002-1 * Unit 50/150 ref. 22.42.001-6 (1 axis) * IKZ - Station 4: * Slide 50/150 (manual adjustment) ref. 22.10.002-1 * Unit 50/150 ref. 22.42.001-6 (1 axis) * IKZ - Station 5: * CNC slide 50/150 ref. 22.10.001-4 (2 axes) * CNC unit 50/150 ref. 22.42.001-6 (with CNC turning function) * IKZ - Station 6: * CNC slide 50/150 ref. 22.10.001-4 (2 axes) * CNC unit 50/150 ref. 22.42.001-6 (with CNC turning function) * IKZ - Station 7: * Slide 50/150 manual adjustment ref. 22.10.002.1 * Recessing unit ref. 22.42.041.1 - Station 8: * CNC slide 50/150 ref. 22.10.001.4 (2001) * CNC unit 50/150 ref. 22.42.001.6 (with CNC turning function) Dcjdpfxju N Ivqj Ab Hsn - Station 9: * CNC slide 50/150 ref. 22.10.001.4 * Sawing unit ref. 22.42.039.2 - Station 10: * Slide 50/150 manual adjustment ref. 22.10.002.1 * Sawing unit ref. 22.42.039.8 - Station 11: * CNC slide 50/150 ref. 22.10.001.4 * Unit 50/150 ref. 22.42.001.6 (CNC turning function) - Station 12: * Slide 50/150 ref. 22.10.002.1 * Sawing unit ref. 22.42.041.1 - Station 13: * CNC slide 50/150 ref. 22.10.001.4 * Sawing unit ref. 22.42.041.1 - Station 14: * CNC slide 50/150 ref. 22.10.001.4 * CNC unit 50/150 ref. 22.42.001.6 (turning function) - Station 15: * CNC slide 50/150 ref. 22.10.001.4 * CNC unit 50/150 ref. 22.42.001.6 (turning function) * IKZ - Station 16: * CNC slide 50/150 ref. 22.10.001.4 * CNC unit 50/150 ref. 22.42.001.6 (turning function) * IKZ - Bar loading magazine, length 4 meters - Coolant tank KNOLL (2,000 liters) with high-pressure pump HP 60 [bar] - Chip conveyor

Būklė: naudotas, TECHNICAL DATA - Number of positions: 16 - Indexing time: 0.7 [s] - Max. bar diameter: 32 [mm] - Collet type: VB 32 - Max. workpiece length: 150 [mm] Dcedpsuhbwijfx Ab Hon - Max. number of horizontal units: 16 - Max. number of vertical units: 8 - Max. total number of units: 24 - Electrical supply: 400 [V] - Installed power: 40 [kW] - Dimensions: 9.8 x 4 x 2.9 [m] - Weight: 6,500 [kg] ACCESSORIES - CNC SIEMENS Sinumerik 805 - HYDROMAT bar loader - 2 CNC turning units, 2 axes - Workpiece conveyor belt - Chip conveyor - Coolant tank - Filtration system

Būklė: naudotas, Gamybos metai: 1969, Revolverinis automatinis tekinimo staklės Gamintojas: INDEX Tipas: B60 Djdpfsylht Usx Ab Hocn Metai: 1969 Su: 8 anga revolverine galva, veleno stabdymo įranga, sriegimo įrenginys, detalių nuėmimo įrenginys, medžiagos padavimas.

Būklė: naudotas, Technical Details: Spindle mount: 40 Number of spindles: 9 units Approx. machine weight: 10.0 t Total power requirement: 13 (17.5 HP) kW Machine dimensions (LxWxH): 4100x3400x3200 mm Control cabinet dimensions (LxWxH): 2100x350x1900 mm TRANSFER AUTOMATIC MACHINE – DRILLING AND TAPPING AUTOMATIC MACHINE – ROTARY INDEXING TABLE MACHINE with 9x drilling and milling spindles - Workpiece carrier with 8 clamping stations: Workpiece holding drum Ø 1000mm (oil-pneumatic circuit), clamping stations equipped with self-centering jaws - Right: 2x drilling-milling spindle, of which 1x with flexible u-axis and 1x tapping unit with 9 speeds, flexible - Left: 2x drilling-milling spindles, of which 1x with flexible u-axis and 1x tapping unit with 9 speeds, flexible; also 2x radial drilling-milling spindles, flexible and 1x tapping unit with 9 speeds, flexible - Drilling unit: Mount SK 40; spindle stroke 125mm; feed rate 0 - 2 m/min; speed in 12 steps from 164 - 1005 rpm - Drilling and facing unit: SK 40; spindle stroke 90mm; feed rate 0 - 2 m/min; rapid traverse 7.5 m/min; speed in 12 steps from 166 - 1020 rpm - 3 tapping units: Mount SK 40; working stroke 125mm; speed in 12 steps from 31.5 - 194 rpm; right and left-hand rotation - 6 opposing drilling units: Mount SK 40 Equipment: - Coolant system with supply - Operation via control panel - Chip box - Counter Dcjdpfju Idwbex Ab Hon - Staircase access

Būklė: naudotas, Technical details: Spindle mount: SK40 Spindle stroke: 175 mm Number of spindles: 8 units Number of stations: 5 units Cycle time: 15-20 sec Speed: drilling 225...1037 rpm Speed: threading 50...316 rpm Feed rate: 0.2 m/min Total power requirement: 30 (40 HP) kW Approx. machine weight: 9.0 t Space requirement approx.: 3.9x2.4x2.5 m Machine dimensions: L: 3.9 x W: 2.2 x H: 2.7 m Dimensions L x W x H: +system 2.7 x 2.52 x 2.25 m Transfer machine The machine can be offered completely overhauled. (Photos show the original condition)! The machine is designed for machining workpieces in a single clamping. It was mainly used for machining brass blanks with a diameter of 90 mm and approx. 100 mm length. Dcedpsu Idycofx Ab Hon Description: - Workpiece carrier cam plate with clamping stations, rotary table type with horizontal axis, 5 workpiece stations. Machining units: - Drilling spindle and thread cutting units - Drilling capacity up to 2 3/4" and 81.53 mm in brass - Thread cutting up to 2 1/2" and metric threads The machine is equipped with a loading and unloading unit for workpieces. (Feed capacity 3-4 pcs/min and cycle time 15-20 sec.) Including coolant system In good condition.

Būklė: naudotas, Technical details: Number of spindles: 11 units Number of stations: 11 units Spindle taper: SK 40 Required air pressure: 6 - 7 bar Total power requirement: 13 kW Dcodpfx Aju Idw Iob Hon Approx. machine weight: 10.2 t Space requirement approx.: 4.0 x 4.0 x 3.4 m Machine dimensions: 3.4 x 3.45 x 2.9 m Control cabinet dimensions: 2.1 x 0.4 x 1.9 m Thread cutting and drilling machine with 11 drilling and milling spindles Accessories optional. Please enquire! - Workpiece drum Ø 1000 mm with workpiece carrier, featuring 8 workpiece clamping stations; self-centering clamping jaws with 260 mm between jaws, max. 20 mm clamping jaw stroke (hydro-pneumatic circuit) - 11 work stations with SK 40 taper - 4x drilling/milling spindles on the right and 4x drilling/milling spindles on the left, plus 3x radial drilling/milling spindles - Drilling unit: spindle stroke 125 mm, feed rate 0 – 2 m/min, speed 164 – 1005 rpm in 12 steps - Thread tapping units: working stroke 125 mm, reversible rotation (left/right), speed 31.5 – 194 rpm in 12 steps - 8 opposing drilling units with SK 40 interface - Coolant system with supply - Operation via control panel - With chip tray, L: 1000 x W: 740 x H: 220 mm internally supplied.