Daugiaverpės staklės

GILDEMEISTER AS 16 / 08

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2022, veikimo valandos: 13 116 h, Max. bar capacity mm 20 Max. Z-axis travel sliding headstock/short turning mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Tool stations quantity 8 Driven tools quantity 8 Max. speed rpm 12,000 / 8,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool cross-section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 B-axis swivel angle degrees 105 Lower turret Tool stations quantity 8 Driven tools quantity 8 Max. speed rpm 12,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool cross-section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Backworking unit Tool stations quantity 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Gjdpfx Aewuddvjdpstt Holder diameter mm 25 Sub spindle Max. spindle bore mm 20 Max. speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant system base unit Pump pressure bar 3 / 8 Tank capacity l 250 Pump rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions Length x Width x Height mm see layout plan * Weight kg 5,000 * Connected load kW 40 (47 kVA)

Gamybos metai: 2002, Sąlyga: labai geros būklės (naudotas),

Sąlyga: geras (naudotas), Gamybos metai: 2003, Main spindle: Gtedpfxov Drige Adpst Speed range – main spindle: max. 6,000 rpm Drive power – main spindle: 16 kW Max. torque: 155 Nm C-axis: 360° Tool turret: Number of tool stations: 12 positions Number of driven tool stations: 12 positions Speed range – driven tools: max. 5,000 rpm Drive power – driven tools: 10 kW Tool holder: (VDI 30) Tool shank: 20 x 20 mm Travels: X-axis: 160 mm Z-axis: 450 mm Feeds: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 1/min Max. torque C: 155 Nm Connected load Machine weight approx.: 3.7 t Space requirement approx.: 4.5 x 2.5 x 2.5 m Control: Heidenhain Hollow clamping cylinder C-axis and tool drive Chip conveyor Oil and emulsion mist separator with electrostatic filter

Gamybos metai: 1996, Sąlyga: naudotas, Schütte SF 26S DNT Year of manufacture: 1996 Control: Siemens 840C Number of spindles: 6 Maximum bar diameter [mm]: 26 Bar loading magazine: Cucchi BLT Multi-6 - (year 2015) Gtsdpfx Adji Hb Szspjt Positions I + III + IV + VI: Longitudinal and cross slides Positions II + V: CNC slide Infeed position VI Pick-off unit at position VI Cutting oil system Ruez hinge belt conveyor in machine base Knoll hinge belt conveyor 280 S-1/40 ID 26565 (external) Electrostatic separator ISI RON/A 2500A, ID 26295

Sąlyga: naudotas, Gamybos metai: 1988, Funkcionalumas: nepatikrintas, Berstorff mixing mill 400 x 900 mm Gtedpfx Adsr A Dfyspjt More details in the attached description!

Sąlyga: naudotas, Table size 900 x 460 mm X/Y/Z travel – 600/400/420 mm Spindle speed 20–4000 rpm Spindle taper ISO 40 Hydraulic tool clamping Tool changer with 32 stations Drilling stroke in vertical head 75 mm Gjdpfx Ael Dvx Esdpott Swiveling vertical head +/- 90° Control: Heidenhain TNC 407 Equipped with: Machine vice 19 tool holders Coolant system

Sąlyga: naudotas, Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 3261, X ašies eiga: 2 000 mm, Y ašies eiga: 1 300 mm, Z ašies eigos atstumas: 1 300 mm, sukamosios stalo skersmuo: 1 600 mm, Įranga: sūkių greitis be galo kintamas, Used Milling/Turning Center SHW UniSpeed 5T MC-No. 3261 – Year of Manufacture 2011 Travels: X = 2,000 mm | Y = 1,300 mm | Z = 1,300 mm Construction: Self-supporting machine frame without complex foundation work. Precision compact linear roller guides on all axes. Machine column in portal construction, spindle head and slide made of GGG 60 cast iron with hydraulic weight compensation. Drive & Feed: Digital AC single drives, infinitely variable 2–30,000 mm/min, acceleration 2 m/s². Direct measuring system for high accuracy. Universal Milling Head (orthogonal): - GGG 60 cast, automatic swiveling 360°/180°, 64,800 CNC-controlled positions - SK 50, tool clamping force 20 kN - Power: 26 kW (100% duty cycle) / 36 kW (40% duty cycle), 22–6,000 rpm - Hydromechanical quick-change tool clamping CNC Rotary Table: - Ø 1,000 mm, face runout 0.015 mm - Turning: up to 250 rpm | Torque: 2,700 Nm - Table load: Milling 6,000 kg, Turning 3,000 kg - Swing diameter: max. 1,800 mm Balancing Device: Integrated system for vibration measurement & correction (DIN ISO 1940 G 6.3 to >G 3). Operation via Siemens 840D. Tool Changer: - Chain magazine for 90 tools Gtedpfx Asw Eb Itedpjt - SK 50, max. Ø 125/250 mm, length 400 mm, weight 25 kg - Horizontal tool change, fixed position coding, blow air for spindle protection Control: Siemens 840D, mounted on the machine, swiveling. Electrics: Total connected load approx. 80 kVA. Control voltage 24 V, protection class IP 54, EN 60204. Control cabinet with integrated cooling (dual-chamber system, airtight, with dehumidification). Cooling & Lubrication: - ICS & shower ring (switchable), 500 l tank, max. 40 bar - Minimum quantity lubrication MMS (Lubrix 850) via spindle - Rinse gun, frame flushing, air/coolant switching - Lubrication: centralized for guides, grease-lubricated spindle, oil mist for milling head Chip Conveyor: Hinged belt, X travel 2,000 mm, width 350 mm, discharge height 1,250 mm Additional Systems: - 1-channel collision monitoring - Sealing air at glass scales - Wireless 3D touch probe - Extended milling head swivel range -90° to +110° - VisioPort for clear view - Rotary feedthrough in rotary table for clamping hydraulics incl. clamping monitoring - Zero-point clamping system with operating panel buttons - Safety glass (18 mm) - Air filtration system ILT Unifil 1 MRV70-4.0 (4,200 m³/h) - External B-MPI hand unit with handwheel, override, emergency stop - Energy connections: compressed air 4–6 bar (G¼) Painting: Base color RAL 7004 signal grey, functional units RAL 7016 anthracite grey or RAL 9011 graphite black, silk matt, oil & soda resistant.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, veikimo valandos: 52 455 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2501-0154, tekėjimo ilgis: 600 mm, sukimosi skersmuo virš skersinio stumduko: 140 mm, tekėjimo skersmuo: 300 mm, ašies variklio galia: 25 000 W, veleno greitis (min.): 5 000 aps./min, veleno greitis (maks.): 5 000 aps./min, Z ašies eigos atstumas: 900 mm, greitas poslinkis X ašimi: 3 m/min, greitas poslinkis Y ašis: 3 m/min, greitasis eiga Z ašyje: 3 m/min, sukimosi greitis (maks.): 4 000 aps./min, sukimosi greitis (min.): 4 000 aps./min, sukimo momentas: 239 Nm, strypo praėjimas: 80 mm, X ašies padavimo greitis: 165 m/min, Y ašies padavimo greitis: 165 m/min, padavimo greitis Z ašis: 220 m/min, bendras svoris: 10 500 kg, Įranga: dokumentacija / vadovas, The machine is still in use and can be viewed in operation at VOVU Machining in Uden. A total of 6 identical machines are available here. Equipped with Fanuc 310iS control. Gtsdpfjur Hfzjx Adpjt

Sąlyga: naudotas, Gamybos metai: 1965, Honing diameter: 80 mm Stroke: 280 mm Throat depth: 300 mm Total power requirement: 6 kW Machine weight: approx. 2.6 t Max. honing diameter: 10–100 mm Max. honing depth: approx. 250 mm Max. spindle stroke: 260 mm Throat depth: 300 mm Installation height: 1,000 mm Table size: 350 x 500 mm Table height above floor: 500 mm Spindle speeds, steplessly adjustable: approx. 85–300 rpm / 170–600 rpm Stroke speed, stepless hydraulic: 0–23 m/min Spindle drive: 2 kW Total drive: approx. 6 kW – 380 V – 50 Hz Weight: approx. 2,600 kg Accessories / Special equipment: - Integrated 2-station rotary table for accommodation of 2 workpieces, with mechanical workpiece clamping via hand lever. Gsdpfx Adet Hwupopstt - Hydraulic feed of the tool - Shut-off via timer, presumably with air measuring device - Honing oil system, various splash guards, etc. Condition: good – demonstration ready Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further honing machines constantly in stock; please inquire with us.

Sąlyga: labai geros būklės (naudotas), Perfekt erhaltene sechsspindlige INDEX MS 25 Mehrspindel-Drehautomat mit sechs Quer- und sechs Längswerkzeugführungen. Der Preis ist verhandelbar und abhängig von der gewählten Zusatzausstattung: Spannzangen, Werkzeugen, Späneförderer usw. Gsdpfxjqhkukj Adpett Die Maschine befindet sich noch im Produktionseinsatz. Besichtigung nach Absprache möglich.