Apdirbimo centras

GF Agie Charmilles 3 R TOOLPAL U 50760.004

Sąlyga: naudotas, Gamybos metai: 2021, HAAS MINIMILL 2 Rsdpjyaqtajfx Agiop Metai: 2021 Stalo dydis: 1016 mm x 356 mm X ašies eiga: 508 mm Y ašies eiga: 406 mm Z ašies eiga: 356 mm Velenas: SK40 Veleno greitis: 0–6000 aps./min 2x Renishaw zonda Įrankių keitiklis: 20 įrankių Apytikslis svoris: 2313 kg

Sąlyga: naudotas, Gamybos metai: 2007, x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm Control: Sinumerik 840 D Siemens Maximum clearance between columns: 3,000 mm Maximum clearance height: 1,950 mm Maximum distance from spindle center to table: 1,800 mm Distance spindle nose to table: 1,350 / 1,500 mm Type P 8005020/00-4 Main spindle speed range: up to 18,000 rpm Main spindle drive power: 20 kW Max. torque: 48 Nm Tool holder: HSK-A63 DIN 69063 Spindle extension: 450 mm Rodpfxsvy Ihde Agijp Swiveling B-axis: +110° / -10° Rotating C-axis: +/- 200° Type P 8002320/00-4 Main spindle speed range: 20 - 5,000 rpm Main spindle drive power: 40 kW Max. torque: 1,100 Nm Tool holder: HSK-A100 DIN 69063 Spindle extension: 300 mm Swiveling B-axis: +110° / -10° Rotating C-axis: +/- 200° Table clamping surface: 4,000 x 2,200 mm (2x) Max. table load: 12 / 20 t Height above floor: 700 mm Number of T-slots: 11 + 19 T-slot width: 28H7 mm T-slot spacing: 200 mm Number of tool positions: 327 pcs. Number of tool positions HSK A63: 156 pcs. Number of tool positions HSK A100: 171 pcs. Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 / 500 mm Max. tool weight HSK A63: 5.0 kg Max. tool diameter HSK A100: 315 mm Max. tool length HSK A100: 500 / 800 mm Max. tool weight HSK A100: 40.0 kg Feed rate X: max. 30,000 mm/min Feed rate Y/Z: max. 40,000 mm/min Feed rate B: 3,600 °/min Feed rate C: 2,160 °/min Acceleration X: max. 1.5 m/s² Acceleration Y/Z: max. 3.2 m/s² x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm b-axis +110° / -10° c-axis +/- 200° Total connected load: 150 kVA Space requirement approx. 25.0 x 12.0 x 7.0 m 5-Axis Gantry Large Machining Center DROOP + REIN - TFS 22 40 DT D40 P - Two milling heads - approx. 4,000 operating hours - X-axis 10,000 mm (coupled) / 2x 5,000 mm (single table) - 3 simultaneous axes (X, Y, Z) - 2 positioning axes (B, C) - Tools subject to agreement

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, mašinos/transporto priemonės numeris: 1, šlifavimo ilgis: 1 000 mm, šlifavimo plotis: 600 mm, Horizontal surface grinding machine Geibel & Hotz FS 1050 SD Grinding area: 1000 x 600 mm Fine pole spacing on the magnetic chuck Various flanges and grinding wheels Large paper band filter Adjustable leveling feet Wiring & circuit diagram Balancing scale Rjdpfx Agsv U Dfujijp The machine was in use at most 2 days per week – not a production series machine Pricing: ex location – unpacked – uninsured Delivery: immediate – subject to prior sale Errors excepted – technical data not binding

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, TECHNICAL SPECIFICATIONS Table Clamping surface: 1200 x 450 mm Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm T-slots: 6 x 18 H7 Maximum load: 400 kg Distance Between T-slots: 65 mm From spindle centre to underside of counterholder: 160 mm Feeds Longitudinal feed: 0-4000 mm/min Cross feed: 0-4000 mm/min Vertical feed: 0-1500 mm/min Redpfx Aewuurwsgisp Rapid traverse Longitudinal: 4000 mm/min Cross: 4000 mm/min Vertical: 1500 mm/min Spindle Taper: ISO40 / DIN2079 Speed range: 55-3000 Head, swivelling: 0-140° Spindle feed Quill diameter: 90 mm Quill travel: Manual Feed: 75 mm Weight: Approx. 2300 kg SCOPE OF SUPPLY Includes, among others (list not exhaustive): ABENE milling machine Heidenhain control Toolholder set Coolant pump Levelling feet Mounting block Complete operating documentation Exact scope of supply according to photo series.

Gamybos metai: 2009, Sąlyga: naudotas, Technical Details: Rjdpfswp I S Hox Agijp Tool holder: Ø 54 mm Voltage: 3-phase AC 400V / 50–60 Hz Compressed air connection: 6 bar Total power requirement: 11 kW Total weight approx.: 120 kg Dimensions L x W x H: 0.7 x 0.65 x 1.7 m Induction shrink-fit machine with water cooling (30-litre tank integrated in the housing) Application: for ultra-fast tool changing via targeted induction heating Cooling medium: Emulsion For tools Ø 3–50 mm (solid carbide) and Ø 6–50 mm (HSS) Tool holder Ø 54 mm Runout accuracy < 0.003 mm ThermoGrip shrink chuck ISGS 3200-1, Ø 3–32 mm Operation via control panel

Sąlyga: geras (naudotas), Gamybos metai: 2000, mašinos/transporto priemonės numeris: 13639, Heidenhain Steuerung Verfahrwege: Rjdpfx Ajinh Rqjgijp X-Achse: 1.200 mm Y-Achse: 800 mm Z-Achse: 500 mm Hauptspindel: Drehzahl: 16.000 U/min Antriebsleistung – Hauptspindel: 17 kW Werkzeugaufnahme Spindel: HSK63 Spindeldurchmesser vorn im Lager: 70 mm Erweiterter Werkzeugwechsler: 100 Plätze Rundschwenktisch: Tischdurchmesser: 800 mm Schwenkbereich A-Achse: -15° / +97° Drehbar C-Achse: 360° max. Tischbelastung ca. 1.000 kg max. Werkzeugdurchmesser: 80 mm max. Werkzeugdurchmesser bei freiem Nebenfach: 125 mm max. Werkzeuglänge: 300 mm max. Werkzeuggewicht: 8 kg Vorschübe: Eilgang (X / Y / Z): 30 m/min Gesamtanschlusswert: 31 kVA Maschinengewicht: 15 t Platzbedarf ca.: 6,0 x 5,0 x 3,6 m Sonstige Ausstattung: - Dokumentation - Späneförderer - Elektronische Wärmekompensation Y- und Z-Achse

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 1988, - Completely overhauled in 2022 - Heidenhain TNC320 CNC control system - CNC or manual operation possible - Movable vertical milling head with extendable spindle - Counter support for long milling arbors - Hydraulic tool clamping - Automatic gear transmission - Automatic clamping on X, Y, and Z axes - Automatic central lubrication - Coolant system - Direct position measuring - Collision protection coupling on the Y and Z axes - Year of manufacture: 1988 - Includes tool holders, drilling/milling tools & tool cart Specifications Working area: - X-axis (longitudinal): 485 mm - Y-axis (cross): 385 mm - Z-axis (vertical): 380 mm - Quill stroke (vertical): 80 mm - Vertical milling head manually adjustable on spindle headstock: 150 mm Main drive: - Pole-changing three-phase brake motor: gearbox with forward/reverse operation - Power: 3.7 / 4.4 kW - Working spindle speeds: 63 - 3150 rpm (18 steps) - Step increment: 1.25 - Tool holder: SK40 (M16) Rodpfx Ajwhk Ubjgiep - Tool clamping: disc spring pack - Tool release: hydraulic Feed drive: - X-axis: 1 DC motor - Y & Z axes: 1 DC motor - Ball screws: all axes - Feed rate: 2 - 3000 mm/min (programmable) - Rapid traverse X/Y/Z axis: 3000 mm/min Table slide: - Number of T-slots: 4 - T-slot width: 14H7 mm - T-slot spacing: 63 mm - Permissible load: approx. 600 kg Installation: - Required space (including safety area): approx. 2300 x 2500 mm - Machine weight incl. vertical milling head and angle table: approx. 1830 kg - Operating voltage: 400 V - Total connected load: 12.5 kVA - Floor loading: 3000 kg/m²

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Naudojamas Hankook 7NB x 4000, 2 ašių CNC tekinimo staklės Pagaminimo metai: 2010 Serijos numeris: 41L09117 Gamintojas: Hankook Kilmės šalis: Pietų Korėja Modelis: Protec 7NB x 4000 mm Staklių tipas: 2 ašių CNC plokščialovės tekinimo centras CNC valdymas: Fanuc 21-iT su MG-i STAKLIŲ KONSTRUKCIJA IR YPATYBĖS - Masivi ketaus konstrukcija - Sunkios apkrovos grūdinti ir šlifuoti bėgiai - Didelio skersmens veleno kiaurymė - Pilno ilgio galinis drožlių gaubtas - Automatinė tepimo sistema visom svarbiom dalims TECHNINIAI PARAMETRAI Tekėjimo skersmuo virš staklių lovos: Ø 750 mm Tekėjimo skersmuo virš skersinės: Ø 480 mm Didžiausias tekinamas skersmuo: Ø 750 mm Atstumas tarp centrų: 4,000 mm Maksimali ruošinio masė: 3,000 kg VELENAS Veleno kiaurymė: Ø 176 mm Veleno nosis: A2-11 Veleno centro kūgis: MT #6 Apsisukimų dažnis: 3 – 1,000 aps./min. Apsisukimų diapazonas: rankinis, 2 žingsniai AUTOMATINIS V8 REVOLVERIS Pjovimo įrankių skaičius: 8 Laikiklio skersmuo: Ø 60 mm Mechanizmas: elektrinis PADAVAS Greitoji eiga X: 3 m/min Greitoji eiga Z: 6 m/min Eiga X: 425 mm Eiga Z: 2070 mm GALINIS CENTRAS Kūgis/skersmuo: MT #6 Quill skersmuo: Ø 112 mm Maksimali Quill eiga: 200 mm VARIKLIAI Veleno galia: 15/18 kW X ašies galia: 1.2 kW Z ašies galia: 3 kW SVORIS Bendras svoris: 5,520 kg STANDARTINĖ KOMPLEKTACIJA • CNC sistema • Priekinės durys • Aušinimo sistema • Pamatų inkarai ir įdėklai • Darbo apšvietimas • Centro įvorė MT #6, kūgis 1/10 • Centras MT #6 • Gyvas centras MT #6 • Pilno ilgio galinis gaubtas • Įrankių dėžė STANDARTIŠKAI ĮMONTUOTI PRIEDAI • Fanuc 21-iT • Transformatorius 415V, 3faziai, 50Hz Rjdpfsv Rqftex Agiop PAPILDOMAI: - Hankook 7NB x 4000 mm su Fanuc 21-iTB - Modifikuota apsauga ilgiems gręžimo strypams - 20” griebtuvas - Atraminiai centratoriai: 50–250 mm, 250–450 mm - Algra automatinis 8 pozicijų revolveris - Gręžimo strypo laikiklis, 100 mm ø, ir 60 mm ø (1 vnt.) - Colių/metricų konvertavimas - Custom Macro B - Papildomas Block Skip - G Code System B/C - Programuojamas duomenų įvedimas - Tikroji veleno apsukų išvestis - 32 poros įrankių kopmpensacijų - Išplėstinis programų redagavimas - Manual Guide i - Išorinis įrenginių valdymas bei duomenų įvedimas - High Skip PAPILDOMAI PRIDEDAMI PRIEDAI • Specialus sukamas centras (TBC) • Marposs TT30 nuimama įrankių nustatymo ranka • LNS drožlių transporterio trumpa versija ir aušinimo/drožlių padėklai • Sandvik slopintas/gręžimo strypas 100 mm ø x 1500 mm ilgio, komplekte su laikikliu • Filtermist filtravimo sistema • Papildoma durų apsauga

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, veikimo valandos: 87 327 h, Funkcionalumas: visiškai funkcionalus, We offer you: CNC Machining Centre – Universal Manufacturer: DMG MORI Model: DMU 210P duoBlock µ-Precision Year of manufacture: 2013 Control: Siemens 840D sl Technical specifications: Travels: X-axis: 1,800 mm Y-axis: 2,100 mm Z-axis: 1,250 mm Rotary range: 360° Main spindle: Max. speed – main spindle: 18,000 rpm Drive power – main spindle (100/40%): 35 / 25 kW Rotary table: Table diameter: 1,700 mm Tool changer: Tool holder: HSK-63A Number of tool positions: 120 pos. Operating hours: approx. 87,327 h Spindle hours: approx. 48,297 h Technical features & accessories: - Universal milling head with controlled B-axis - NC rotary table with cooled drive train - Tool measurement in the working area, BLUM Laser NT Hybrid (colour) - Coolant supply through spindle centre at 40 bar - Coolant tank 2,500 l - Chip conveyor - Rotating viewing window - Electronic handwheel - 3D path control - Infrared probe, Renishaw PP60 optical (OMP 60) - 3D quickSET Rodpfeyhbcuox Agisp - 4-colour signal lamp - Rinsing gun with pump - Operating mode 4 - Machine adaptation for aluminium and glass processing, consisting of: - Linear guides with additional Viton wipers - Ball screws partially with additional Viton/felt scrapers - Sealing air for all linear measuring systems - Reduction of lubrication intervals to 10 to 15 minutes (overlubrication) - Adaptation of the maintenance schedule for steel covers - Interface for camera monitoring and integration into the control system - Machine prepared for vacuum setup, consisting of: - 2-channel rotary feedthrough, special centring sleeve and cable routing in the T-slots to the table edge - Additional compressed air connection at the table plate edge (opposite vacuum connection) - Vacuum monitoring integration at terminals with NC stop and error message “Vacuum error” - Oil-resistant rubber hose with mounting via 2 clamps on the rotary feedthrough - Evaluation of the “minimum level” error in feed and spindle stop - Coolant flow monitoring for internal and external coolant supply - Cable routing prepared for use of the spindle growth sensor (SGS) At the beginning of 2025, the ball screws and linear guides on the x, y and z axes were replaced. Accessories, displayed tools and clamping devices are only included in the scope of delivery if specified in the additional information. Technical data and information subject to change and errors excepted. Intermediate sale reserved!

Sąlyga: naudotas, Gamybos metai: 2004, Technical details: X-axis travel: 750 mm Y-axis travel: 600 mm Z-axis travel: 520 mm Table clamping surface: Ø 700 x 500 mm Spindle speed: 42,000 rpm Tool holder: HSK E50 Control unit: HEIDENHAIN iTNC 530 Rjdpfx Agewzx Nmeiop Tool changer: 60 positions Rapid traverse: 50 m/min Table load – central/max.: 350 kg Total power requirement: 50 kVA Machine weight approx.: 9 t Required space approx.: 3.2 x 2.65 x 2.8 m 5-axis simultaneous HSC machining center, NC rotary swivel table 700 x 500 mm, B-axis 180°, C-axis 360°, Chip conveyor, Electronic handwheel, Laser, Prepared for 3D probe HEIDENHAIN TS 641 (probe not included) BA 4, Oil mist extraction, Spindle cooler, No ICS (internal coolant supply), Approx. 141,300 power-on hours, approx. 64,500 spindle hours total Machine in good condition (measurement protocol available).