Barų tiektuvas

FMB Turbo 10-65XT/3200/A

Būklė: naudotas, Gamybos metai: 2007, Techninės detalės: Sukimosi skersmuo: 220 mm Sukimosi ilgis: 310 mm Nwodsx Aq Hwjpfx Acaei Bendras galios poreikis: 17 kW Apytikslis staklių svoris: 3,3 t Apytikslis užimamas plotas: 2,25 x 1,63 x 1,94 m Sukimosi skersmuo virš lovos: 430 mm Prašvaistės skersmuo: 45 mm Atstumas tarp centrų: 687 mm Slydimo eiga radialiai (X ašis): 160 mm Slydimo eiga ašimiškai (Z ašis): 310 mm Veleno sūkių dažnis: 0–6.300 aps./min

Būklė: naudotas, Gamybos metai: 2008, Technical details: Swing diameter over bed: 600 mm Swing diameter over cross slide: 540 mm Nodpfsvvtpxjx Acaswi Turning length: 550 mm Longitudinal travel (Z-axis): 800 mm Cross travel (X-axis): 260 mm Control: Fanuc 18i-TB Spindle bore: Ø 73 mm Bar capacity: Ø 65 mm Spindle speed: 0 ... 5000 stepless rpm Spindle torque: max. 250 Nm Rapid traverse on X-Y-Z axes: X/Z: 30 m/min / Y: 12 m/min C-axis rapid traverse speed: 1000 rpm Tool turret - number of stations: 12 (Sauter) Operating pressure: 6.0 bar Electrical system - voltage/frequency: 3 x 400 V / 50-60 Hz Operating pressure: 6 bar Total power requirement: 40 kVA Machine weight approx.: 5.7 t Machine dimensions (LxWxH) approx.: 2.2 x 3.4 x 2.4 m Chip conveyor dimensions (LxWxH): approx. 2.9 x 0.6 x 0.55 (0.38 t) m Chip tray dimensions (LxWxH): approx. 1.6 x 1.3 x 0.25 (0.2 t) m Transport dimensions machine: approx. 3.3 x 1.9 x 2.2 m The machine features C-axis, E-axis, Y-axis, and W-axis. Driven tools possible in all turret stations. Distance spindle to sub-spindle = 1050 mm Sub-spindle: A2-6, travel 800 mm, spindle Ø 105 mm, torque 250 Nm Control cabinet equipped with Rittal cooling unit Including hinged belt chip conveyor Chip tray Compressed air gun Note: The machine is offered WITHOUT any chucks as shown!

Gamybos metai: 2005, būklė: paruoštas naudoti (naudotas), Tank capacity: 775 l, max. batch weight: 100 kg, heating power: 26 kW, max. temperature: 75°C, basket dimensions X/Y/Z: 660 mm / 480 mm / 338 mm, fine filtration tank 1/2: 100 µm / 50 µm. Machine dimensions X/Y/Z: approx. 1850 mm / 1400 mm / 1800 mm, weight: approx. 950 kg. The machine was overhauled in 2024 and has not been used since. Including basket rotation with swivel drive, automatic water filling, and oil separation with coalescence separator unit and oil collection container. Documentation available. On-site inspection possible. Nwodpfx Aewr Dxhecaoi

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2022, X ašies eiga: 260 mm, Y ašies eiga: 115 mm, bendras svoris: 6 850 kg, valdiklių gamintojas: OKUMA, valdiklio modelis: OSP-P300LA, ašių skaičius: 5, Ši 3 ašių "Okuma LB 3000 EX II", pagaminta 2022 m., pasižymi tvirta horizontalaus tekinimo galimybe. Jame yra "Iemca KID 80" strypų tiektuvas, 250 mm SMW griebtuvas ir 170 mm "Kitagawa" griebtuvas. Dėl 22 kW pagrindinio suklio variklio galios ir iki 6000 aps/min sukimosi greičio jis užtikrina veiksmingas tekinimo operacijas. Jei ieškote aukštos kokybės tekinimo galimybių, apsvarstykite mūsų parduodamas "Okuma LB 3000 EX II" stakles. Susisiekite su mumis ir gaukite daugiau informacijos. • Atstumas tarp verpstės nosių: 1085 mm • Didžiausias tekinimo skersmuo: 340 mm • Strypų talpa per pagrindinį verpstės traukos vamzdį: 80 mm • Papildomo suklio anga: 63 mm • Strypų našumas per papildomo suklio traukos vamzdį: 52 mm. • Varomųjų įrankių sukimosi greitis: 45-6000 aps/min. Papildoma įranga • Iemca KID 80/16 Plus strypų tiektuvas (2022 m.) - KID 80 įeina į komplektą • 250 mm SMW griebtuvas ant pagrindinio suklio • 170 mm "Kitagawa" griebtuvas ant papildomo suklio • 6 minkštųjų žandikaulių komplektai Nsdpsx D Rvnsfx Acaswi • 4 tiesiaeigiai įrankių laikikliai • 4 kampiniai varomųjų įrankių laikikliai • 2 dvigubo tekinimo įrankių laikikliai • 4 ištekinimo strypų laikikliai • 8 standartiniai tekinimo įrankių laikikliai • 8 tiesūs ER laikikliai su maždaug 30 ER spaustukų

Būklė: naudotas, Gamybos metai: 2008, tekėjimo skersmuo: 275 mm, veleno skylė: 80 mm, veleno greitis (maks.): 4 000 aps./min, X ašies eiga: 260 mm, Z ašies eigos atstumas: 1 345 mm, bendras aukštis: 2 232 mm, bendras ilgis: 4 339 mm, bendras plotis: 2 232 mm, bendras svoris: 7 600 kg, Įranga: dokumentacija / vadovas, Mori Seiki NL 2500 SY / 1250 CNC tekinimo staklės su Y ašimi, varomais įrankiais ir antrąja velene CNC valdymas MSX-850-III (mitsubishi 720 BM) Sukimo skersmuo 275 /366 mm Velenu pragręžimo skersmuo 80 mm Veleno sūkių dažnis 4000 aps./min Njdpfx Acey Nyzgjaswi Veleno variklis 18,5/15 kW X ašies eiga 260 mm Y ašies eiga +50 / -50 mm Z ašies eiga: 1345 mm W ašies eiga (priešinis velenas iki pagrindinio veleno) 1275 mm Min. C ašies (pagrindinio veleno) indeksavimo žingsnis 0,001° Revolverio įrankių kiekis 12x Varomų įrankių kiekis 12x Įrankio konusas BMT Strypų padavėjas LNS Quick Load Servo III Varomų įrankių veleno sūkių dažnis 6000 aps./min Jei turite klausimų apie įrenginį ar norite apsilankyti, susisiekite su mumis telefonu arba el. paštu. Taip pat kviečiame peržiūrėti kitus mūsų skelbimus – gaukite visapusišką apžvalgą apie mūsų sandėlio atsargas.

Būklė: naudotas, Gamybos metai: 2005, Turning diameter: 275 mm Turning length: 900 mm Control system: TRAUB TX8i Spindle bore: 65 mm Drive power, 100% duty cycle: 25.20 kW Drive power, 40% duty cycle: 30.20 kW Torque at 40% / 100% duty cycle: 180 / 135 Nm Spindle speeds, stepless: 1 - 5,000 rpm Spindle diameter in front bearing: 110 mm C-axis: 1 - 500 rpm Tool turret No. 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 600/950 mm B-axis: 360° Rapid traverse X/Y/Z: 18 / 18 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8,000 / 2,000 rpm Drive power, 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 4x18.6 / 4x74 Nm Tool holder: TRAUB Ø60 Tool turret No. 2 / No. 3 / No. 4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse X/Y/Z: 18 / 15 / 30 m/min Feed force X/Y/Z: 10 / 10 / 7 kN Turret - number of stations: 10 Number of driven tools: 10 mm Tool speeds: 1 - 6,000 rpm Drive power, 25% duty cycle: 5.80 kW Torque at 25% duty cycle: 18.60 Nm Tool holder: DIN 69880 Ø40x63 Bar feeder: DNH61 / 3000 Bar lengths: 1,000 - 3,200 mm Bar diameter: 18 - 63 mm Max. hexagon: 45 mm Total power requirement: 95.00 kW Machine weight approx.: 16.00 t Installation dimensions approx.: 10.00 x 3.50 x H3.00 m Equipped with TRAUB TX 8i control, main and counter spindle with C-axis, 3 turret tool carriers, Njdpfjw E Nnbsx Acaewi 1 vertical tool carrier with B-axis, extraction system, chip conveyor, coolant system with coalescence separator. Bar loader: TRAUB Stamag DNH61 / 3000 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH collet chucks 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package The machine can be inspected under power.

Būklė: naudotas, Gamybos metai: 2004, Mazak Multiplex 6300 Mazatrol 640T Baujahr: 2004-11 ca. 20 Stück Werkzeuge Mazak Flex-GL200F Njdpfx Ajv Tvkajcaowi Weitere Informationen folgen in Kürze.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Commissioning: as Okuma stock machine 09.2017 Control system: OSP P300S Machine Equipment ▪ Enlarged main spindle KK size 11 Front bearing Ø 160 mm Speed range 3,000 rpm Bore Ø 112 mm Motor power 32 kW Torque 955 Nm ▪ Hollow clamping cylinder Ø 127 mm SMW VNK 320-127 with bore Ø 127 mm ▪ Pressure reducing valve Adjustment range 8-70 bar ▪ Tailstock ▪ Turning length approx. 1500 mm ▪ H1 turret (1 station) ▪ Y-axis ▪ B-axis 0.001° ▪ 40-position tool magazine ▪ Additionally: lower turret with 12 stations ▪ Tool spindle 12,000 rpm ▪ Hinge belt chip conveyor: High-performance chip conveyor with low-maintenance self-cleaning functionality ▪ Drum pocket filter TMF300 with clean tank 980 l ▪ Supply pump TC160/740, 8 bar ▪ Supply pump RSP 20/32-070-1-1-0, 70 bar ▪ Self-centering steady rest on the lower turret (not possible in combination with driven tools on lower turret) ▪ Automatic door ▪ Robot interface Type E for the integration of other loading/unloading systems on single-spindle machines ▪ 3D machine model for simulation in a CAM system Technical Details ▪ Main drive (Okuma motor spindle): 22 kW / 700 Nm / 50-4,200 rpm Spindle nose KK size 8 Front spindle bearing Ø 140 mm Spindle bore Ø 91 mm Speed range: 2 steps Range shift at full speed ▪ Lower turret: 12 stations ZB-axis with cylindrical roller guide XB-axis with slideway ▪ Collision avoidance system CAS in real time ▪ 19'' color LCD TFT (1280x1024) with 3D color graphics as touch screen/panel with vertical display and tiltable keyboard (adjustable inclined) ▪ Second operating system Windows 7 for operation and data communication, open and freely available for Windows 7 compatible applications ▪ Programmable tailstock on W-axis with hydraulic quill ▪ Tool magazine 40 stations ▪ C-axis 360° Positioning in 0.001° ▪ Y-axis with travel +150 / -150 = 300 mm Nodpfxeyviigo Acaewi ▪ B-axis 240° Positioning in 0.001° ▪ Tool spindle (Okuma motor spindle): 22 kW / 120 Nm / 12,000 rpm ▪ Internal coolant supply for rotating tools, pump with max. 20 bar pressure Including bag filter, external cooling for tool spindle, pump with max. 3 bar pressure ▪ Tool system HSK-A63 ▪ Tool monitoring system for tool life and breakage ▪ Tool measurement device (when using standard chuck) for safe setup ▪ Machine management MacMan with integrated production data acquisition (PDA) ▪ Part program memory 2 GB ▪ Max. length single part program 2 MB ▪ 2x USB 2.0 ports ▪ Ethernet interface with browser and DNC-T1 for program transfer ▪ Harmonic speed vibration by periodic speed variation ▪ Tool height correction on the Y-axis for turning tools ▪ Circular thread milling X/Z/Y/B (helical interpolation) Including eccentric milling X/Y/C ▪ Hi-Cut Pro high-speed control for rotary tools ▪ 10 workpiece zero points (coordinate system selection function) ▪ Coordinate transformation (shift, rotate) ▪ Electronic spindle orientation +/- 0.1°

Būklė: geras (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, CNC Lathe TRAUB TNX 65/42 Nwedpfxjyw H Szs Acaji Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. main spindle chuck diameter: 175 mm - Minimum C-axis resolution: 0.001 degrees SUBSPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001 degrees - Travel path: 700 mm LEFT UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel X/Z: 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total drive power: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle since 04/26 ACCESSORIES - 3-color status light - Coolant tank: RESY * with high pressure pump * with paper filter - Chip conveyor - Parts catcher - Parts conveyor belt

Gamybos metai: 2000, būklė: paruoštas naudoti (naudotas), Working area X/Y/Z: 1200mm/1200mm/840mm, Dimensions X/Y/Z: 1300mm/1300mm/2010mm, Weight: 650kg, Sound level: 70dB(A) without blasting, 82dB(A) with blasting at 3 bar, max. compressed air: 10bar. Includes an electronically infinitely variable steel rotary table (diameter: 1000mm), an abrasive drying system, and a second blasting gun unit with carbide nozzle. Documentation available. Nwedpfx Acetk Rwtjasi