Vienos sijos tilto kranas

FMA

Gamybos metai: 2014, būklė: paruoštas naudoti (naudotas), Span: 3150 mm, load capacity: 6.3 t, lifting height: 5450 mm, weight: 2.85 t, including documentation and SWF electric trolley. Giedohyxpuopfx Ap Iju

Būklė: naudotas, Gamybos metai: 1992, Technical details: X-travel: 800 mm Y-travel: 550 mm Z-travel: 500 mm Spindle taper: ISO SK 40 Control system: Philips 532 Vertical quill stroke: 80 mm Spindle speed range: 0–600 and 600–4000 stepless rpm Feed rate: 1–3000 mm/min stepless Rapid traverse: 6 m/min Table clamping surface: 1100 x 600 mm Table feed: 1–3000 mm/min stepless Operating hours: 82,194 h Total power requirement: 9.6 kW (12 kVA) Weight approx.: 4,200 kg Machine dimensions (LxWxH): approx. 2.9 x 2.2 x 2.5 m Additional technical specifications: Giedpfju Nda Esx Ap Isu - Vertical table adjustment (Z-axis): 500 mm - Spindle head overhang min./max.: 200 / 750 mm Equipment: - Coolant tank with pump - Handheld control unit - Heidenhain linear measuring system

Būklė: geras (naudotas), Gamybos metai: 1957, hydraulic power unit, hydraulic pump - max. pressure: 100 bar - flow rate: 21 l/min - weight: 200 kg Gsdpfx Apob A I Elj Ijiu

Būklė: geras (naudotas), Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tie rod cylinder Giodpfx Ajv N D H Ujp Isu -Manufacturer: FMA Pokorny, hydraulic cylinder tie rod cylinder stroke 50 mm -Type: 50030-00-5 -Piston rod: Ø 16 mm -Dimensions: Ø 65 x 340 mm -Weight: 5.6 kg

Būklė: naudotas, Gamybos metai: 1974, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t Gedpfx Ajt Hww Dep Ieiu LORENZ High-Performance Gear Shaping Machine Model LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm * (possibly larger) Max. internal gear diameter approx. 350 mm Max. gear width 75 mm Module range 0.5 - 6 Stroke length 82 mm Stroke position adjustment 0 - 100 mm Distance from shaping spindle to machine body 205 mm Spindle taper approx. MK 5 Strokes per minute roughing/finishing 118 - 1,000 /min. Table size 400 mm Table bore 125 mm Installation height between table and shaping head min./max. 190/290 mm Fixed distance shaping spindle 250 mm Table axial travel approx. 295 mm Number of teeth approx. 12 - 150 Feed range Tooth depth 0.01 - 0.063 mm /stroke -"- Radial feed at tool-Ø 125 0.125 - 3.150 mm /stroke Spindle / total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special equipment: • Hydrostatically guided slideway with separate hydraulic unit • Built-in intermediate plate 100 mm to increase shaping head height • Hydraulic workpiece clamping system, brand RINGSPANN, integrated in the table for flat components and internal clamping, various clamping chucks for different workpiece diameters • Infinitely variable stroke speed adjustment for roughing and finishing (SIMOREG DC-Master) • Automatic stroke speed change and automatic feed change for roughing and finishing in up to 3 cuts • Automatic and motor-driven stroke position locking at top dead center after finishing • Separate control cabinet • Integrated coolant system with chip conveyor and magnetic separator • Approx. 20 change gears Condition: Satisfactory to good, shortly demonstration-ready Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Būklė: geras (naudotas), Clamping plate, marking/spotting plate, measuring plate, measuring table, welding table, alignment plate -Clamping plate originates from a measuring machine -Width: 1335 mm -Length: 3000 mm -Height: 250 mm -Plate thickness: 40 mm -Plate features: support ribs -Includes: 4 leveling feet -Quantity: 1 piece available -Transport dimensions: 3000 x 1335 x 750 mm (L x W x H) Gsdpfxjfc T Tqo Ap Ieiu -Weight: 2749 kg

Būklė: labai geros būklės (naudotas), Sunnen GH210 horizontali hone mašina Metai: 2010 Maksimalus eigos ilgis: 8000 mm Veleno greitis: 0 - 300 aps./min Godpfxjw U Uh Dj Ap Isiu Maksimali veleno galia: 40 AG (29,83 kW) Maksimali stūmoklio galia: 18 AG (13,42 kW) Eigos greičio diapazonas: 0 – 100 pėd/min (0 – 30,5 m/min) Vidinis diametro diapazonas: 2 – 24 coliai (50,8 – 609,6 mm) Išorinis diametras: 26 colių standartas (660,4 mm) Maksimalus gaminio svoris: 8000 kg Apytikslis įrenginio svoris: 12 066 kg 400 VAC 50 Hz, 3 fazės (85 A) Siemens Simatic valdymas,

Būklė: naudotas, Mount: MK 4 Giedpfxob N Ezre Ap Iou

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2019, veikimo valandos: 250 h, mašinos/transporto priemonės numeris: 0131, valdymo tipas: NC valdymas, automatizacijos lygis: pusiau automatinis, pavaros tipas: hidraulinis, Vamzdžio skersmuo (maks.): 48 mm, Vamzdžio ilgis (maks.): 3 000 mm, Vamzdžio sienelės storis (maks.): 4 mm, Lenkimo kampas (maks.): 180 °, bendras svoris: 670 kg, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, skaitmeninių ekranų skaičius: 1, Įranga: CE žymėjimas, avarinis stabdymas, centralizuota tepimo sistema, dokumentacija / vadovas, TUBOMAT - simply smart. TUB-C G3001 The tube bending machine is ideally suited for single parts and small series. The software allows individual tubes to be parameterized, simulated, and stored. Bending data is then transmitted to the machine via network (LAN). Basic Equipment for Bending - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Well-known 4-angle preselection or program mode - 80 memory slots for up to 10 sets - Actual/Set value display for bending angle - Compact, forward-mounted bending head - Optimized tool design - Hydraulic bending drive, operated via proven hand lever - Hydraulic tube clamping - Hydraulic slide shoe adjustment - Hydraulic mandrel retraction - Mobile machine usage possible Gisdpsx E Rdwjfx Ap Ieu - Saw unit for optimal perpendicular cuts - Deburring unit for internal and external deburring - Universal base interface as a drive unit for mounting attachments Technical Data - Tube capacity up to: 48.3 x 3.25 mm (E235 with Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Maximum bending angle: 180° (+10° overbend) - Bending accuracy: ± 0.2° - Bending speed: 20°/s - Dimensions (L/W/H): 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW - Connection data: 400 V / 50 Hz / 3 phases - Mains fuse: CEE 16 A - Colour: RAL 9006 / 7021 / 5015 Software (Windows 11) PIPEFAB 4.0 BE Basic Package Tube Bending Software - Oracle Express database for stand-alone application - Creation of isometries (single tube) - ConCSVImp - interface for importing CSV format - Calculation of bending data taking into account springback, elongation, and rebound - Verification of clamping length, start and end lengths - Output of bending data (printout) - BendSim - bending simulation and graphical representation via parametric tool configuration - BendCon - creation and transfer of NC bending data for TUBOMAT - Data transfer via LAN Tool Holders 1 Adapter set for bending rollers with 25 mm bore 1 Clamp piece adapter installation space 100 mm 1 Fixture for stationary slide shoe installation space 100 mm Tools Bending tools consisting of bending roller, clamp piece, and slide shoe (stationary) Tube Diameters / Bending Radii - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm - Ø22.0 mm R=44.0 mm Bending Mandrels 3000 mm for Steel Tubes Design with lubrication channel for minimum quantity oil lubrication - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Pre-assembly Studs for Cutting Ring Fittings (L=light, S=heavy duty version) Tube Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Counter-hold Plates for Cutting Ring Pre-assembly with Automatic Pressure Setting for Steel and Stainless Steel Tubes Tube Ø - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Other tube diameters and wall thicknesses are possible. The machine is used but is in as-new condition. The machine can be inspected and demonstrated by appointment. The machine must be collected from our premises but can be loaded by us. Commercial sale. Price plus 19% VAT. Subject to errors and prior sale.

Būklė: geras (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, vėsinimo galia: 491 kW (667,57 AG), įvesties srovės tipas: trifazis, aušinimo tipas: vanduo, bendras svoris: 4 600 kg, įėjimo dažnis: 50 Hz, Įranga: aušinimo blokas, kompresorius, Naudotas, gerai prižiūrėtas oro aušinamas spiralinis rotacinis skysčių šaldytuvas Trane RTAC 140 Markė: Trane RTAC 140 Metai: 2009 Produkto tipas: Oro aušinamas šaldytuvas Šaldymo galia, kW: 491,9 Šaldymo medžiaga: HFC 134a Šaldymo kontūrai: 2 2x Trane CHHP0M2TKGON092A kompresoriai Garintuvo modelis: EH140 Vandens bakas, l: 112 Minimalus srautas, l/s: 13 Maksimalus srautas, l/s: 44 Vandens eiga: 2 Kondensatoriaus ventiliatorių skaičius (1): 4/4 Skersmuo, mm: 762 Bendras oro srautas: 35,45 m3/s Šaldymo agentas: Freonas Šaldymo agento tipas: R 134 A, 74 kg Svoris, kg: 4500 Matmenys: 5041x2260x2750 mm (IxPxA) Giedpfoula Trox Ap Iou