Stulpinis gręžtuvas

FLOTT SB 40 MV Plus (NEU ab Werk)

Būklė: naujas, Suction capacity at filter unit nozzle*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte *Depending on filter configuration Special voltages or special colours available on request Ncsdpfx Ash Rdwxon Ist Application: Extraction of oil mist and smoke, suitable for small to very large machine workspaces | Oil mist separator Advantages of the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC as standard (digital filter control) - Electronically regulated EC fan as standard - Adjustable speed and air flow - Available as Simplex (single-stage) or Duplex (two-stage) - Wide range of air flow capacities available - Can be adapted to pollutant load and air flow requirements - Extensive range of installation and connection accessories - Quality Made in Germany We developed the ELBARON® filter series for use in metalworking with straight oil or for the separation of oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most powerful filters on the market and are used worldwide. Our filter units are already fully digitalized as standard and can, for example, be controlled via laptop. The ELBARON® product range includes 18 device variants and can be optimally configured in terms of size and capacity for your specific application. ELBARON® units impress with long service life and total operational reliability. Our electrostatic filter cells are dimensioned to provide the best possible filtration efficiency, service life, and trouble-free operation while maintaining economic efficiency.

Gamybos metai: 2018, būklė: beveik kaip naujas (naudotas), Dumeta welding positioner, hydraulically height-adjustable Njdpfxehua Dqj An Ijct 500 kg load capacity, height-adjustable welding positioner with through-hole 100–200 mm Table diameter: 700 mm Horizontal height: min. 0.6 m, max. 1.2 m Height when tilted: min. 0.40 m, max. 1.0 m Rotation speed: 0.11 – 1.25 rpm Weight: 750 kg Tilting angle up to 135° Hand and foot remote control with speed display Very robust design

Būklė: naujas, Table diameter: 490 mm Table load: 300/150 kg Swivel range: 0-90° manual Table load horizontal: 300 kg Table load vertical: 150 kg Bore diameter: 65 mm Table rotation speed: 0.4 - 4.0 rpm Voltage: 230 V Total power requirement: 0.2 kW Machine weight approx. 0.1 t Space requirement approx. 0.5 x 0.52 x 0.5 m The D-DWP welding positioners are equipped with a through-hole in the turntable, greatly expanding your options for flexible positioning and rotary welding of your component. This is particularly advantageous for welding with backing gas. Using these tilt-rotary tables can boost production rates and further improve product quality. Thanks to their compact design, the D-DWP series can be integrated into any existing production facility in a space-saving manner. Features: - Foot pedal included - Infinitely variable speed control - Very high stability – compact model Ncodpjgvkktefx An Iet - Through-hole in turntable - CE marking

Būklė: naudotas, Gamybos metai: 1979, Swing diameter over bed: 480 mm Swing diameter over cross slide: 200 mm Turning length: 650 mm Max. turning diameter over bed cover: 200 mm Centre distance: 750 mm Njdpfx Asdmbrxen Ioct Spindle head: size 6 Spindle bore: 58 mm Total power requirement: 18 kW Machine weight approx.: 2.7 t Space requirement approx.: 2.70 x 1.58 x 1.68 m CNC path control, 2 axes, SINUMERIK 5T with threading, tailstock quill taper Morse 4, max. quill stroke 200 mm, tailstock displacement 550 mm Control cabinet 80 x 40 x 230 cm, weight: 150 kg Motor control cabinet with Siemens 810T Dimensions (W/D/H): 80 x 90 x 100 cm, weight: 200 kg 4x plates + Spax + sheet metal screws Drilling machine, drill bits

Būklė: naudotas, Gamybos metai: 1980, Grinding length: 500 mm Grinding width: 200 mm Workpiece height: 290 mm Machine from the Physikalisch-Technische Bundesanstalt Njdpowb Hygjfx An Ioct - Geometrically reconditioned - Electrical system checked, fully functional, relevant components replaced - All wear parts replaced - Color: light grey, paint condition good Equipment: Electromagnetic chuck 500x200 mm Grinding spindle overhauled 2-axis digital readout for Y and Z axes Automatic feed for Y and Z axes Y-axis with zero shut-off Manual hand dresser Infinitely variable grinding wheel speed Constant V-belt despite wheel wear Paper band filtration system, used Max. height with 250 mm grinding wheel diameter: 290 mm Max. grinding area: 600x250 mm Max. load including magnet: 100 kg Warranty: 1 year on geometry and electronics throughout Germany Delivery: ex works Availability: immediately Payment: prior to collection Acceptance at our facility Shipping as specified by the customer

Būklė: naujas, - Capacity: 100 tons - Cylinder stroke: 400 mm - Working width: 1500 mm Nsdpfx Aoilvb Nsn Isct - Movable cylinder - Electrically or manually operated - Pressure gauge - Emergency stop - 400V

Būklė: naujas, Dimensions (LxWxH): 3,600 x 1,120 x 1,020 mm Approx. weight: 2,400 kg Total power requirement: 4 kW Bending capacity: 5 mm Sheet thickness: 6 mm Sheet length: 2,030 mm Technical Data Roll diameter: 170 mm Equipment • 3 rolls • Asymmetrical roll arrangement – with pre-bending Ncodpfxjd Ab Has An Iot • Top roll swivels forward • Motorized right-left control • Conical bending by tilting the rear roll • Operation via foot pedal • Hardened rolls • Digital display Catalogue available at the following link:

Būklė: naujas, Bernardo TM 36 BLO/ R 1200 Electric Tapping Machine Technical Specifications Tapping capacity*: M5 - M36 Tool holder: GT 24 Max. speed: 30 - 150 rpm Adjustable angle: 0° - 90° Max. working radius: R 1200 mm Quick-change chuck DIN 376: M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36 Motor power: 1200 W Voltage: 230 V Weight approx.: 35 kg * Material strength 400 N / mm2 Scope of delivery - Operation via touchscreen - Digital drilling depth display - Micro-spray system - Chip blow-off device - Quick-change holder - Quick-change chuck according to DIN standard - Electric motor - 90° angle adjustment - Mounting flange Features - Standard equipped with micro-spray system for constant cooling and minimal coolant consumption - Includes chip blow-off device for removing chips, providing an optimal view of the borehole - Includes quick-change chuck for use with taps for through and blind holes - Swivelling motor unit for tapping at any desired angle between 0° and 90° - Higher accuracy compared to manual tapping, guaranteeing a perpendicular (90°) thread - High productivity, significant time savings compared to manual tapping - Quick-change chuck with integrated slip clutch prevents tap breakage - Includes swivel arm with large radius for easy positioning of the tap on the workpiece - Suitable for tapping steel, stainless steel, aluminium and non-ferrous metals Price: Base frame 900 x 600 mm with 2 drawers for TM series €830.00 plus 19% VAT. Ncedpspag R Rjfx An Iet

Būklė: naudotas, Gamybos metai: 1990, mašinos/transporto priemonės numeris: 2316-3, Ref. No. 10622 Technical Data: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity in cast iron GG 25: 40 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 40 - Drill spindle taper: MK 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. distance spindle – table: 300 / 700 mm - Drilling radius min/max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement approx.: W 1300 x H 2800 x D 2300 mm - Weight approx.: 1500 kg Nsdpfxsu Et Nbs An Isct Equipped with: - Thread cutting unit - Hydraulic column and arm clamping - Coolant system - T-slots vertical on the left side of the machine

Būklė: naudotas, Gamybos metai: 2013, Drožlių konvejeris, gamintojas BMF - BÜRENER su filtravimo sistema ir aukšto slėgio siurbliu. Drožlių konvejerio matmenys: Nedoiicnkopfx An Ioct Kaklo plotis: 600 mm, kaklo aukštis: 200 mm, transportavimo ilgis: 3000 mm.