Lentyninė vežimėlis, komplektavimo vežimėlis, stelažas

FETRA

Būklė: geras (naudotas), Fetra vežimėlis su stalu 127x80 cm, su 3 lentynomis Kedjyury Ropfx Agfelp Puikios būklės, kaip naujas. Modulinė konstrukcija. Mėlyna miltelinė danga. Nežymintis termoplastinio kaučiuko protektorius, ratukai su preciziniais guoliais. 2 pasukami ratukai su stabdžiais ir 2 fiksuoti ratukai. Keliamoji galia: 500 kg

Gamybos metai: 2026, būklė: naujas, The AL-KO Sanding Table AST 1.5 BASIC is the entry-level model in the AL-KO sanding table product range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested in Accordance with BGI 739-1” seal. This makes it suitable for hand sanding tasks as well as for processing workpieces using handheld machines. The sanding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to its funnel-shaped design with an integrated air duct, the airflow is precisely guided towards the extraction port. Depending on the required extraction performance, the unit can be connected to the on-site extraction system via a Ø 140 mm or Ø 160 mm connection port. The folded edges along both sides of the work surface allow for face-end working on workpieces. The extraction grates are aerodynamically aligned with the extraction port to ensure optimal extraction results. For cleaning inside the sanding table, the slatted grid can be removed and the air duct can be detached by loosening just a few screws. The sanding table is delivered pre-assembled; only the legs need to be installed and adjusted to the required working height. Your advantages: • Accessible from all four sides • Loadable up to 150 kg • Manual, tool-free height adjustment with scale • Offset side edges for edge sanding • Workpiece-friendly beech slatted grid (removable) Kedefyadbopfx Agfjlp • Funnel-shaped air guidance to the extraction port Technical data: • Extraction port: 140/160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at port at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working surface (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Būklė: naudotas, Writing desk trolley, rolling lectern, tiered trolley, logistics trolley, shelving trolley, transport trolley, platform trolley, workshop trolley FETRA Type 5834 Writing surface height: 1100 / 1190 mm Writing surface: 605 x 585 mm Shelves: 600 x 495 mm Load capacity per shelf: 50 kg Total load capacity: 100 kg - Rolling lectern made of steel tube and section steel - Bolted construction, powder-coated, blue RAL 5007 - Writing surface on wooden panel with edge strip, inclined approx. 10° - 2 shelves, variably positionable (2 folder heights possible) - 4 swivel castors (Ø 125 mm) with plastic rims and rubber treads - 2 fixed castors with brakes Space requirement (L x W x H): 600 x 600 x 1190 mm Net weight: 25 kg Ksdpfx Aopflp Ejgfolp Very good, as-new condition 8 units available, price per unit

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Sunkiųjų krovinių priekaba Gamintojas: FETRA Tipas: 6787 Metai: 1999 Pakrovimo aikštelė: Plotis: 1250 mm Ilgis: 2500 mm Pakrovimo aukštis: 500 mm Svoris apie 500 kg Labai geros būklės. Kledpfx Agoygc R Rsfsp

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, gerklės gylis: 1 200 mm, tuščias svoris: 2 000 kg, stalo plotis: 1 200 mm, Veneer Splicing Machine with Integrated Gluing System Manufacturer: Fisher & Rückle Model: IMPETUM 1200 (2025 Model) Including 4 mm Veneer Thickness Conversion Kit Allows for quick and easy conversion of the IMPETUM to process veneer strip thicknesses up to 4 mm. The kit includes a foot pedal for manual initiation of veneer feeding. Designed for gluing and tight longitudinal splicing of parallel-aligned veneer strips in a single operation using standard urea adhesives. Technical Data: - Veneer strips must not have excessive tension or waviness. - Veneer strip lengths (grain direction): 380 - 4000 mm - Veneer strip widths (across the grain): 45 - 1200 mm - Veneer strip thicknesses: 0.4 - 1.5 mm (up to 4 mm with conversion kit) - Feed speed: 5 - 50 m/min - Throughput speed (practical average): approx. 20 - 30 m/min - Heating zone length: 1000 mm - Max. heating temperature: 200 °C - Throat depth: 1200 mm - Working height: approx. 960 mm Glue pot capacity: 150 g Adhesive type: Urea glue Glue pot cooling: Water Features: - Storage of machine settings for recurring jobs. - Separate electric drives for chain feed and gluing application. During interruptions, chains can be stopped to prevent wear, while the glue in the pot remains agitated to avoid clumping. Kledpfjxd Apmsx Agfjp - Glue is only applied to newly fed veneer strips, significantly improving joint quality. - Robust, virtually wear-free stainless steel transport chains. - Six heating zones for different temperature settings. - Infinitely variable splicing speeds. - Touch panel with temperature, speed, and pressure displays. - Easily accessible glue pot for quick refilling or cleaning. - Extended glue usability thanks to integrated glue pot cooling. - Consistent and even glue application without over-gluing thanks to precise glue dosing. Connected load: approx. 3 kW Compressed air: 6 bar Compressed air consumption: 5 NL/min Shipping dimensions: approx. 2300 x 2300 x 1850 mm Weight: approx. 2000 kg

Gamybos metai: 2014, būklė: naudotas, Gas cylinder trolley, gas bottle cart, steel cylinder cart - Transport trolley Kljdpfxsd Aay Ae Agfop - Tyres: Puncture-proof PU tyres 260x85mm - Quantity: 1 unit available - Price: per unit - External dimensions: 730/500/H1150 mm - Net weight: 17.5 kg

Būklė: naudotas, Rack trolley, paint drying trolley, shelving transport trolley, transport trolley, tiered trolley - Overall length: 1190 mm Kedpsb Hw D Rofx Agfolp - Overall depth: 720 mm - Overall height: 1800 mm - Weight: 66 kg

Būklė: geras (naudotas), pjovimo ilgis (maks.): 3 600 mm, bendras svoris: 4 000 kg, Pjovimo ilgis (maks.) 3600 mm Ksdpfx Agewv Eiiofolp

Būklė: naudotas, Gamybos metai: 2021, shelving trolley, transport trolley, rack trolley, sorting trolley, order picking trolley, mobile shelving unit, cantilever trolley Kljdpfx Agothrv Ujfop - Manufacturer: Fetra, Cantilever Trolley Type 4614AS with roll-off protection - Load capacity: 500 kg total / 80 kg per level - Cantilever length: 600 mm, height adjustable - Chassis: 2 swivel castors with brakes / 2 fixed castors - Shelves: 5 units - Overall dimensions: 1300/810/H1800 mm - Weight: 114 kg

Būklė: naujas, fetra, chassis, steerable, 8 units for sale Chassis for the easy and safe transport of machines and other heavy items. Robust welded steel construction, equipped with round steel handgrips, powder-coated in blue RAL 5007. Features a rotating load plate and towing drawbar. The load plate is fitted with a non-slip rubber surface. Drawbar includes one towing eye. Large steel rollers with ball bearings. Quantity: 8 units (also available individually) Technical details: Total load capacity: 12,000 kg Kledpsuqap Dofx Agfep Overall length: 640 mm Overall width: 566 mm Overall height: 115 mm Loading platform length: 400 mm Loading platform width: 220 mm Number of axles: 2 Number of load rollers: 8 Wheel size: 83 x 85 mm Wheel material: Steel Note: Drawbar length: 1,075 mm Weight: 66 kg

Būklė: geras (naudotas), Kodas: 0263 Gamintojas: MONGUZZI Modelis: TRC - MP 4200 - CE standartas Automatinis hidraulinis lukšto giljotininis pjūklas su viena geležte – CE standartas Techniniai duomenys: Tvirta pagrindo konstrukcija Ksdpfx Agjx Hfr Ssfjlp Didelis sunkus spaustuvas, užtikrinantis optimalų visų rūšių lukšto tvirtinimą Aukštos kokybės plieninė geležtė su dideliu atsparumu dilimui Galimas naudojimas tiek automatiniu, tiek rankiniu režimu Hidraulinis valdymo blokas Antrasis valdymo pultas galiniam koregavimui Automatinis galinis atmušėjas su elektroniniu programatoriumi 1500 mm Pjovimo ilgis: 4300 mm Maks. atmušėjo gylis: 1500 mm Min. atmušėjo gylis: 25 mm Naudingo spaustuvo atidarymo aukštis: 80 mm Spaustuvo plotis: 360 mm Pjovimo laikas: 4 s Saugos fotoląstelinės užtvaros Galia: 10 kW Darbo paviršiaus aukštis: 910 mm Bendri matmenys: įrenginys – 5700 x 1300 x 1800 mm (aukštis); galinis atmušėjas – 3500 x 2000 x 300 mm (aukštis) Svoris: 6500 kg