Vertikalus apdirbimo centras

Fanuc Robodrill a-T21 iF

Gamybos metai: 1978, būklė: naudotas, Pressure 100 t Throat depth 380 mm Stroke 400 mm Predpfxelp U Dpe Aaxsa Drive power 22 kW Installation height 600 mm Ram area 600x500 mm Table area 720x600 mm Machine weight approx. 9 t Two-hand operation, Stroke and pressure cutoff, Pressing time

Būklė: naujas, Gamybos metai: 2026, Maximum pressure: 20 tons Stroke length: 200 mm Maximum speed: 10 mm/sec Return speed: 20 mm/sec Work table: 480x1060 mm Working height: 900 mm Oil tank: 10 liters Pedpfx Ashgib Noaxjra Maximum workpiece height: 200 mm Capacity flat: 200x12 mm Tube capacity: 48x4.0 mm *not with standard tools - Digital limitation of stroke and return stroke - NC control - Adjustable hydraulic pressure - Adjustable bending speed - Fully enclosed table - The ZOPF design enables quick tool changes without any loss of precision - The hydraulic cylinder is mounted on the heavy-duty machine table, ensuring there is no loss of precision even under high loads - With the universal tool holder and various tools, you can work with maximum flexibility.

Būklė: naujas, Gamybos metai: 2023, BERG+SCHMID aliuminio diskinis pjūklas, modelis VELOX 350, su rankiniu greičio reguliavimu: 1800+3600 aps./min. • Kampinis pjovimas į kairę ir į dešinę 45° • Galvutės pasviriamasis pjovimas iki 45° (su perjungikliu) • Guoliuose montuotas besisukantis darbinis stalas • Pjūklo pagrindas • Aukščiausia pjovimo kokybė dėl vibracijos slopinimo • Labai sklandus pjovimas • Greitas paleidimas ir didelis našumas • Pjūklo pagrindas su atliekų surinkimo dėžute Pjūklo disko matmenys: 350 x 32 mm Kiti priedai, tokie kaip pjūklo diskai, ritininės platformos, matavimo atramos, minimalaus kiekio tepimo sistema ir kt., tiekiami pagal užsakymą! Pristatymo laikas: iš sandėlio Waiblingen, Beinstein. Prsdpfxer Ilkte Aaxja

Būklė: naujas, Cutting capacity at 90 degrees: round 255 mm Pedourc S Rjpfx Aaxora Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Blade speed: 35 + 70 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.42 t Space requirements: approx. 1.23 x 1.7 x 1.75 m Double mitre metal band saw, GBS 250 Super AutoCut (20413) - Mitre cuts up to 60° left and 45° right - Ball bearing mounted rotary table - Quick-release vice - Heavy-duty, large material support - Automatic coolant system

Gamybos metai: 1990, būklė: naudotas, Table clamping surface: 700 x 1200 mm Travel paths x/y/z: 600/300/350 mm Spindle mount: SK 40 ISA Min./max. distance table/spindle: 150/540 mm Spindle speeds: 45 - 6000 rpm Number of tool stations: 12 pieces Feed rates: 5,000 - 20,000 mm/min Rapid traverse: 5,000 - 20,000 mm/min Spindle drive: 5.5 kW Pjdsda S Nvepfx Aaxera Electrical connection: 380 V, 12 kVA Space requirement: 2,350 x 2,100 x 2,500 mm Weight: 3,800 kg

Būklė: naujas, Gamybos metai: 2026, veikimo valandos: 2 h, Model 2023 • Professional XRAYmark fiber laser source with 20-watt output and 400 kHz • “PreciseView” scanner unit with live-image camera • T-slot plate or threaded hole plate for easy mounting of the marking unit (200 x 200 mm) • Viewing window with certified laser safety glass • Scan area approx. 100 x 100 mm • Manual height adjustment • Housing with manual lift door for simple and safe marking EZCAD III Software • Barcode and QR code support • Serial number function • Batch scanning from Excel files • Laser parameter finder via matrix for two parameters (e.g. frequency vs. speed, frequency vs. power) • TCP/IP connectivity: Various commands can now be transferred to the software via TCP protocol, allowing easy integration of external components such as third-party camera position recognition, etc. • Industry 4.0: System status can be processed at any time via TCP/IP protocol. • Input and output ports for direct interaction with external devices • New look and feel: Fresh design for even more intuitive and user-friendly operation • 3D preview for rotary axis processing • Performance increase up to 50% thanks to 64-bit technology • Improved stability • Optional control of up to 4 axes WITHOUT switching via PLUGins. • Optional DEEP engraving (slicer software with Z-axis control) • Higher engraving speed for hatching through new algorithms • Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with dual laser pointer for visual focus position check Cuhn227e • LED illumination of the marking area • Connection option for external extraction system • Start button and EMERGENCY STOP on the housing • PC software for Windows operating systems • USB cable for connecting to the computer • Operation manual and software in German We also offer the following options among others: =ᐳ IPG laser source / fiber laser source in different power ratings =ᐳ Motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ Automation for pick-and-place, conveyor belts, and much more! =ᐳ 3D marking and engraving function =ᐳ Automatic focus adjustment =ᐳ Rotary axis unit =ᐳ Motorized linear slides =ᐳ Interlock system for marking WITHOUT safety housing, using only PPE (personal protective equipment) for bulky parts Including training at our training center in Schweinfurt! Our engraving lasers are manufactured in-house at our Schweinfurt facility! Custom requests are always possible! =ᐳ Made in Schweinfurt! Images may show optional features! Laser engraving machine, laser marker, laser marking, laser engraving, laser engraver, laser marking system, laser marking machine, laser marking plant, laser engraving system, marking laser Laser engraving machine, laser marker, laser marking, laser engraving, laser engraver, laser marking, laser marking system, laser engraving machine, #Laser marking system for marking a wide range of materials. The fiber laser source achieves extremely clean and high-contrast #engravings. Prodpfxod Ibu Ne Aaxoa This #laser engraving system is economical and easy to use.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, garantijos trukmė: 24 mėnesiai, Multi-frequency ultrasonic cleaning benchtop unit, perfectly suited for cleaning mechanical components, watches, glasses, jewelry, medical devices, and much more. L-30 PLUS 30 liters 28/40KHz 600W / 220 Volt Basket dimensions: 460 x 260 x 150 mm Available immediately from stock in St. Gallen, Switzerland – also available in smaller models! Various sizes available from stock! Psdpfxsrwpgfe Aaxora High-performance ultrasonic component Precise heating elements for constant bath temperature LED control Consistent power and frequency for improved ultrasonic density, which is especially suitable for cleaning high-precision parts

Būklė: naujas, Gamybos metai: 2026, CORMAK S-200RH – tai modernus, pusiau automatinis metalo juostinis pjūklas, skirtas intensyviam naudojimui metalo apdirbimo pramonėje. Juo galima atlikti pjūvius nuo -45° iki +60° kampu, užtikrinant didelį tikslumą, pakartojamumą ir našumą, net pjaunant sunkius ruošinius. Mašina suderina tikslią padėties kontrolę su svarbiausių funkcijų automatizavimu, tokių kaip svirties pakėlimas ir nuleidimas bei hidraulinio griebtuvo valdymas. Pagrindiniai mašinos privalumai: * Hidraulinis svirties (aukštyn-žemyn) judėjimas su sklandžiu nuleidimo greičio reguliavimu. * Svirties padėties atminties funkcija – automatinis grįžimas į nustatytą aukštį. * Judri, pasukama svirtis nuo -45° iki +60° kampu su aiškia skale. * Hidraulinis griebtuvas su greitu užtvirtinimu ir galimybe pjauti profilius bei vientisus ruošinius. * Svirtis, pagaminta iš vientisos ketaus detalės, užtikrinanti standumą ir stabilumą. * Efektyvus aušinimo siurblys su uždaruoju ciklu. * CE saugos sistema (mikrojungikliai, avarinis išjungiklis). Konstrukcija ir technologija Pjūklo konstrukcija pagrįsta stabiliu plieniniu pagrindu, kuriame integruotas hidraulinis agregatas ir aušinimo skysčio bakas. Pjūklo svirtis, pagaminta iš vientisos ketaus detalės, užtikrina didelį atsparumą vibracijai ir sukimui, o tai tiesiogiai lemia pjūvio kokybę. Juostos kreiptuvai, įrengti su volframo karbido plokštelėmis ir riedėjimo guoliais, garantuoja ašies ir tiesumo išlaikymą pjaunant. Didelio našumo ABB M3V serijos variklis ir sraigtinis reduktorius dirba su dviem pjovimo greičiais. Tikslumas ir našumas Ši mašina leidžia greitai ir pakartotinai pjauti vamzdžius, profilius ir vientisus ruošinius, net ir labai mažo skersmens (nuo Ø 5 mm). Automatinis procesas (nuleidimas, pakėlimas, griebtuvas) žymiai sutrumpina operatyvinį laiką ir sumažina operatoriaus įsikišimą. Integruotas juostos valymo šepetys užtikrina tinkamas darbo sąlygas ir prailgina pjūklo juostos tarnavimo laiką. Paskirtis S-200RH modelis skirtas gamybinėms dirbtuvėms, konstrukcinėms įmonėms, mašinų pramonės ir techninės priežiūros įmonėms. Jis ypač tinkamas kaip juostinis pjūklas, skirtas vamzdžiams ir profiliams pjauti serijinėje gamyboje, taip pat atliekant darbus, kuriems reikalingas didelis pjovimo tikslumas ir pakartojamumas. Standartinė įranga * Valdymo pultas ant atskiro stovo. * Integruotas hidraulinis agregatas. * Hidraulinis griebtuvas. Psdpfx Aasi D D A Sexera * Automatinis svirties pakėlimas ir nuleidimas su padėties atminties funkcija. * Juostos valymo šepetys. * Aušinimo sistema su siurbliu. * Bimetalinė juostinė pjūklo juosta. * Techninė dokumentacija ir CE atitikties deklaracija. Papildoma įranga * Medžiagos padavimo ritinėliai. * Lazerinė pjovimo linijos orientavimo sistema. * Papildoma pjovimo ilgumo matavimo sistema. Pusiau automatinis metalo juostinis pjūklas CORMAK S200RH Techniniai duomenys Tipas: pusiau automatinis juostinis pjūklas. Svirties pakėlimas ir nuleidimas: hidraulinis, sklandus reguliavimas. Juostos greitis: 36 / 70 m/min. Pjovimo kampas: nuo -45° iki +60°. Griebtuvas: hidraulinis. Mažiausias pjovimo skersmuo: Ø 5 mm. Mažiausias ruošinio ilgis griebtuve: 30 mm. Griebtuvo pagrindo aukštis: 780 mm. Pjovimo juosta: 27 x 0,9 x 2910 mm. Bendroji galia: 2,1 kW. Matmenys (ilgis x plotis x aukštis): 1600 x 800 x 1400 mm. Svoris: 530 kg.

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: AB2024, skylaser marking laser – CO2 laser engraving/machine / marking laser is the complete solution for your complex laser engraving, laser marking, and laser coding applications. Important: Compare the installed components in the offered laser systems: Scanlab® scanner, IPG Photonics® laser, Parker® axes, Schneider Electric® motors, Scanlab® controller, German software, and cabling – all components are exclusively German-made! Our laser systems are manufactured 100% in our Plauen factory according to your specifications. Competitors often use Chinese components (it starts with the controller – EZCAD = Chinese origin!). (* Prices vary depending on equipment; this is a brand-new laser machine manufactured by us.) Our skyLaser Mark series are used exactly where conventional CO2 laser technology reaches its limits. With a customizable, mobile worktable, the system’s flexibility is increased. You can easily integrate the system into your production line or operate it as a stand-alone solution. Our skylaser MARK systems deliver precise and permanent marking (laser marking/laser engraving) and are suitable for specialist laser applications on metals and organic materials. A wide range of fonts, the application of barcodes, serial numbers, logos, and images can be achieved effortlessly. Thanks to excellent resolution, nearly any marking requirement can be met. The software is extremely user-friendly; even very complex and intricate marking tasks can be set up easily on the included industrial PC. Exact positioning is accomplished quickly and easily using the integrated positioning laser. Because the system contains virtually no wear parts and, thanks to IPG Photonics (IPG Laser GmbH) fiber laser technology, is nearly maintenance-free, it’s suitable for industrial applications and continuous operation. - Working area: 110x110 or others, e.g., 175x175 mm (F-theta lens dependent), optional - Laser source: IPG laser, others available upon request, depending on application - Laser output: 20W / optional 30W / 50W - Software-controlled precision axes for worktable (X, Y, Z axes) Pedpfe Sd Trex Aaxora - Z-axis travel: max. 200 mm - Marking speed: up to 8,000 mm/s - Redundant safety system - System laser class: 1 - Scanlab SCANcube for perfect results - PFEIFER technology industrial PC incl. preinstalled control software - Positioning laser: integrated diode laser for optimal alignment - Optional: camera positioning, 3D machining, database integration - Virtually maintenance-free

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2021, As-new mezzanine floor for sale Pedpfjuph Avex Aaxera - Already dismantled and ready for loading - Structural analysis and construction drawings available - Nationwide delivery by freight forwarding possible