Suvirinimo įrenginys
EWM Tetrix 301 Comfort acticArc

Pradinė kaina neįskaitant PVM

1 150 €

Gamybos metai

2010

Sąlyga

Naudotas

Vieta

Mittenaar

Suvirinimo įrenginys EWM Tetrix 301 Comfort acticArc

Rodyti žemėlapį

Duomenys apie mašiną

Įrenginio aprašas:: Suvirinimo įrenginys

Gamintojas:: EWM

Modelis:: Tetrix 301 Comfort acticArc

Serijos Nr.:: 0000243380

Gamybos metai:: 2010

Sąlyga:: geras (naudotas)

Funkcionalumas:: visiškai funkcionalus

Kaina ir vieta

Pradinė kaina neįskaitant PVM

1 150 €

Vieta:: Am Taubenrain 7, 35756 Mittenaar, Deutschland

Skambinti

Techniniai duomenys

Įvesties srovės tipas:: Nuolatinė srovė

Pasiūlymo informacija

Sąrašo ID:: A20059325

Naujinta paskutinį kartą:: Data 2025.09.24

Aprašymas

Very good welding machine from EWM. Used with us as a backup unit, therefore very little in use. Here are some details:
• TIG and manual electrode (MMA) inverter DC welding machine
• Mobile, water-cooled, 5m mains cable
• Weld faster and better thanks to EWM-activArc technology
• COMFORT control panel: proven convenience; all important welding parameters directly accessible; 8 JOBs (welding programs) can be programmed by the operator for recurring welding tasks
• Highest efficiency and outstanding quality due to fully digital inverter welding technology
• Suitable for production and repair work in the food and chemical industries, pipeline, tank, plant, vehicle and mechanical engineering, as well as robotic applications
• Intelligent housing design with optimized air routing for increased cooling performance and reduced contamination inside the machine
• Best mobility: easy to maneuver due to large wheels; fits through standard doors; easy loading and unloading thanks to equal wheel track
• TIG welding with HF ignition and Liftarc
• Spot welding, 2-stroke, 4-stroke, tacking, pulsing and kHz-pulsing (2.5 kHz)
Crsdjxfgg Sspfx Admjk
• Adjustable parameters: starting, welding, downslope, and end currents, pre- and post-gas flow, up- and downslope times, pulse and pause times, ignition management
• Manual electrode welding (MMA): adjustable hot start current and time, arc force, anti-stick
• Digital display for welding voltage, current, and parameters
• High-performance cooling system with centrifugal pump and large 12-liter tank, pressure switch, pump and fan temperature controlled

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.

Tiekėjas

Paskutinį kartą prisijungęs: praėjusią savaitę

Registruota nuo: 2025

1 Skelbimas internetu

Skambinti

Pateikti užklausą

Telefonas & Faksas

+49 2778 ... skelbimai

Šie skelbimai taip pat gali jus sudominti.

mažas skelbimas

Vertikalios tekinimo staklės Webster & Bennett

Zaragoza

2 342 km

Vertikalios tekinimo staklės
Webster & Bennett

Skambinti

Sąlyga: labai geros būklės (naudotas), TECHNICAL SPECIFICATIONS Capacity: Table diameter: 3,000 mm Maximum turning diameter: 3,110 mm Csdpsr Ddu Dsfx Admork Maximum workpiece weight: 20 tons Spindle speed: 1.5–39.5 rpm Main motor power: 45 kW Crossrail travel: 1,200 mm Height under crossrail: 1,800 mm Vertical lathe with two rams: Right carriage with pentagonal 5-position turret, automatic indexing X-axis travel: 1,500 mm Z-axis travel: 965 mm Left carriage with RAM X-axis travel: 1,500 mm Z-axis travel: 1,200 mm Remarks: Independent control panel 2 x Fagor 8055 CNC for controlling both carriages from a single screen Grinding head (optional) Year of manufacture/rebuilding: 1975/2001

Peržiūrėti detales

mažas skelbimas

Ritinio lenkimo staklės ERCOLINA CE40M2A

Böblingen

1 247 km

Ritinio lenkimo staklės
ERCOLINACE40M2A

Skambinti

Sąlyga: naujas, Section bending machine with spindle feed. Features: Shaft diameter: 40 mm Working position: Horizontal/Vertical Dimensions (W x H x D): 700 x 1460 x 600 mm Weight: 180 kg Performance: Round tube: 70 x 1.5 mm Square tube: 50 x 50 x 3 mm Round bar: 35 mm Flat bar: 50 x 10 mm Angle iron: 50 x 50 x 6 mm Scope of delivery: CE40M2A Universal roll set for profiles (2 knurled, 1 smooth) Cjdpfjuudhfsx Admerk Accessories (including control panel with foot pedal, operating manual)

Peržiūrėti detales

mažas skelbimas

Suvirinimo aparatas Merkle MobiARC 280 cel

Kaufungen

1 042 km

Suvirinimo aparatas
MerkleMobiARC 280 cel

Skambinti

Sąlyga: naudotas, Gamybos metai: 2011, 1 used welding machine Credpfxeh Nvfno Admek Manufacturer: Merkle Model: MobiARC 280 cel Year of manufacture: 2011 Technical specifications: Merkle MobiARC 280 cel+ welding inverter – supplied with accessories Primary winding: Mains voltage: 400 V Mains frequency: 50/60 Hz Power consumption: 8.3/5.5 | 9.7/8.3 kW Current consumption: 12/8 | 14/12 A Maximum current: 21/16 A, cos φ: 0.98 Manual (MMA) welding: Electrode diameter: 1.5–6.0 mm Open-circuit voltage: 96 / 90 V Welding voltage: 20.6–31.2 V Welding current: 15–280 A, current at 60% duty cycle: 250 / 260 A TIG welding: open-circuit voltage: 96 / 90 V, welding voltage: 10–21.2 V, welding current: 5–280 A, current at 60% duty cycle: 250 / 270 A Insulation class: H Protection class: IP23 Operating modes: MMA, TIG (DC) Cooling: AF Overall dimensions: 485 x 200 x 435 mm Weight: 17.5 kg

Peržiūrėti detales

mažas skelbimas

3 D suvirinimo stalų sistemos be aukščio reguliavimo KK Kletzer Schweißtisch SST 80/16 L Ø28 Fix 2980x1480

Austrija

963 km

3 D suvirinimo stalų sistemos be aukščio reguliavimo
KK KletzerSchweißtisch SST 80/16 L Ø28 Fix 2980x1480

Skambinti

Sąlyga: naujas, Table height: 800 mm Dimensions (LxWxH): 2980 x 1480 x 800 Table width: 1480 Table length: 2980 Approximate weight: 630 kg Cedpfx Aefk Ailedmjrk Special worktable systems of the SST, SFT, and SWT fixed series as 3D clamping workstations for efficient production of assembly, welding, and bonding constructions, e.g. fixtures, railings, frames, etc. With the help of the comprehensive range of clamping accessories (see catalog section welding table accessories), these table systems can also be used as flexibly configurable fixtures and thus allow for high-quality production of small and medium series. The special worktables are equipped with a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop, which features a Ø28 mm hole grid. Additionally, the tabletop offers a 100 x 100 mm grid marking for easy alignment of workpieces or fixtures. The table perforation allows the use of a wide variety of clamping elements and fastening aids. For special applications, the tabletop surface can also be supplied in stainless steel 1.4301, aluminum, plastic, or high-strength materials ST70, as an alternative to the standard. Thanks to the fully bolted construction of the clamping plate, the work surface can be replaced cost-effectively in case of later wear. This ensures the table system remains particularly sustainable for long-term use. Price must be reconfirmed with the manufacturer before ordering!

Peržiūrėti detales

mažas skelbimas

Lazerinio pjaustymo staklės TRUMPF TruLaser 2525 - 4 kw (früher L 2530)

Hardthausen am Kocher

1 184 km

Lazerinio pjaustymo staklės
TRUMPFTruLaser 2525 - 4 kw (früher L 2530)

Skambinti

Sąlyga: geras (naudotas), Gamybos metai: 2008, lazerio galia: 4 000 W, plieno lakšto storis (maks.): 20 mm, darbo diapazonas: 2 500 mm, Įranga: aušinimo blokas, TRUMPF TruLaser 2525 - 4 kW (formerly Trumatic L 2530) Working area: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. sheet thickness (mild steel): 20 mm Max. sheet thickness (stainless steel): 15 mm Max. sheet thickness (aluminium): 10 mm STANDARD EQUIPMENT: - Enclosed machine frame with integrated laser unit - TFT colour display - Positioning laser diode - Motion unit for high-precision machining - Additional high-dynamic Yp axis - Drives with maintenance-free three-phase servo motors - Enclosed beam guidance - Conveyor for small parts and scrap - NitroLine - FlyLine - Piercing detection TRUMPF LASER: - CO2 laser TruFlow 3200 - High-frequency excitation - Maintenance-friendly turbo radial blower - Integrated gas mixer - Laser power control - Laser logbook function CUTTING HEAD: - Laser cutting head with 5" lens - Laser cutting head with 7.5" lens - Universal quick-change device - ControlLine CONTROL: - SIEMENS Sinumerik 840D control - Automatic shutdown - ContourLine - SprintLine - Teleservice - Microweld - RJ45 network port - 3.5" floppy disk drive - Network connection via remote diagnostics SAFETY: - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction unit - Workshop programming Credpfxjrwlwno Admsk EXTENDED EQUIPMENT: - More powerful TruFlow 4000 laser - Automatic pallet changer

Peržiūrėti detales

mažas skelbimas

Hürth

1 228 km

ROMER, miltelinis dažymas
RomerKPZ-4P

Skambinti

Gamybos metai: 2019, Sąlyga: naujas, Model: KPZ-4P Type: Enclosed Working dimensions: 3500 W x 1800 H x 1000 D mm External dimensions: 3300 W x 2300 H x 1800 D mm Operation: Electric Power: 2.75 kW Voltage: 380 V Frequency: 50–60 Hz Cjdpfx Adjbxmfnomork Filters: 6 pcs Filter material: Polyester Filter cleaning: Jet-Venturi Filter area: 22.5 m² Fan: Aluminium Fan noise level: 74 dB(A) Air consumption: 20,400 m³/h Warranty: 12 months

Peržiūrėti detales

mažas skelbimas

Suvirinimo įranga FRONIUS MagicWave 3000

Balaguer

2 244 km

Suvirinimo įranga
FRONIUSMagicWave 3000

Skambinti

Sąlyga: naudotas, Funkcionalumas: visiškai funkcionalus, Water-cooled TIG welding machine for aluminium Brand: Fronius Model: MagicWave 3000 Duty cycle: 250A - 60% 300A - 35% Power supply: Three-phase 380V Unit with water cooling. Includes AC/DC function for aluminium welding. Crsdpsxf Hw Dsfx Admek Active Wave Technology: enhances arc stability and reduces noise level to below 80 dB even at full power (300A). Intelligent automation features: - Automatic tungsten ball formation - Automatic post-flow gas management according to current setting - Thermally controlled fan with automatic shutdown when cooling is not needed Ignition modes: HF (high-frequency, contactless) and Lift-Arc (contact start) for sensitive environments and areas free of electromagnetic interference. Programs and digital control: multilingual plain-text display, full digitalization of the process, "job mode" functions to save and recall welding parameters Advanced operations: 2-step and 4-step modes, pulsed TIG welding, TAC tacking program, spot welding, Up/Down control from torch Includes: - Fronius TIG torch - Ground cable - Gas regulator

Peržiūrėti detales

mažas skelbimas

Dvigubas įstrižas pjūklas FOM Industrie MOXIE

Austrija

1 225 km

Dvigubas įstrižas pjūklas
FOM IndustrieMOXIE

Skambinti

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1998, Cutting diameter: 150 mm Cutting range min.: 150 mm Saw blade diameter: 400 mm Minimum cut length: 420 mm Maximum cut length: 4000 mm Space requirement approx.: 4800 x 1100 x 1500 mm The double mitre saw is in very good condition and has seen very little use. Crjdpfx Aevwgnwedmok

Peržiūrėti detales

mažas skelbimas

Zamość

496 km

DVIGALVIS PJŪKLAS
STB FIMTECSD 500 S6

Skambinti

mažas skelbimas

Dreieich

1 172 km

Iškirtimo staklės
COMACAN 225 S/6

2 600 €

fiksuota kaina neįskaitant PVM

Skambinti

Sąlyga: naudotas, Gamybos metai: 1986, Sheet thickness: 6.0 mm Pressure: 18 t Shearing angle – upper blade: 90° Blade length: 225 x 225 mm Crjdpeg Ip Efefx Admok Operating voltage: 380 V Total power requirement: 5.5 kW Machine weight: approx. 650 kg Space requirement: approx. 1.10 x 0.80 x 1.05 m - Adjustable angle stops

Peržiūrėti detales

Reklamuokite čia