TIG ir elektrinis inverterinis suvirinimo aparatas, TIG suvirinimo aparatas

ESS 170 ATG (AC-DC)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, veikimo valandos: 2 h, Deutz TCD 4.1 L4 Deutz TCD 4.1 L4 EU Stage V / U.S. Tier 4 – EPA (115kW) Charge air and water cooler Electronic direct injection / Common Rail Advanced idle automation with engine shutoff function ECO and Power mode Temperature-controlled fan drive with reversible fan Spatially separated high-performance cooling system Cooling system with temperature-controlled fan drive Reversible fan for hydraulic oil cooler Jump-start terminals on upper carriage Maintenance flaps, gas-spring operated with closing assistance Automatic central lubrication system, grease reservoir fillable from ground level Rear-view camera Side camera LED light package equipment LED light package for cabin Dozer blade on oscillating axle side, 3m wide, with integrated cylinder protection Travel direction detection and steering direction inversion Electric steering lock for rigid axle Cedpfsyh A Iiex An Hsrc All-wheel drive and all-wheel steering Dual-circuit braking system Power-shift transmission Twin air tires, without spacer rings 10.00-20 16PR (Trelleborg T900) Wireless tire pressure monitoring Automatic oscillating axle lock Front and roof protection grille for timber handling machines Rigid cabin system (viewing height 4.00 m) Cabin privacy glazing (side, rear window) Single-pane safety glass Sliding window in cabin door Clear glass roof window Windscreen wiper and washer system (front window) Low-frequency suspension comfort driver's seat including seat heating and seat ventilation with oscillating armrests / joysticks Joystick steering Automatic climate control Multifunction display Document clip Reach at stick pin 13m at grab tip 10.7m Close-range extension for loading stick Level monitoring for coolant and hydraulic oil Filtration system for attachments Load-holding valves lift cylinder Load-holding valves stick cylinder Overload warning device Basic Quick-release coupling on loading stick Wood grabbers available on request: 1 or 1.25m³

Būklė: naudotas, Machine weight approx. 110 kg Space requirement approx. 950 x 435 x 980 mm ESS’s newly developed "mti inverter series" for single-phase welding machines, which has already proven itself thousands of times over, is now being expanded to include a three-phase system. The combination of semiconductor technology, resonant inverter circuits, and classic reactor technology once again allows the integration of the respective advantages into future-oriented welding machines. --> Technical Data Crodpfewf Rg Sox An Hoc Mains connection: 3/PE AC 400 V --> Maximum primary power: 14 kVA --> Line fuse: T 16 A --> Setting range: 5 - 300 A --> Electrode diameter: Ø 1.5 - 5 mm --> Protection class: IP 23 --> Water cooling unit for welding torch: integrated

Būklė: naudotas, Naujas: Taip Darbinis plotis: 750 cm Crodpfex Tgb Ijx An Hjc

Būklė: labai geros būklės (naudotas), ašių konfigūracija: 2 ašys, pirmoji registracija: 09/2020, spalva: raudona, Gamybos metai: 2020, Įranga: ABS,

Būklė: naujas, Gamybos metai: 2026, The CORMAK WS20 bench drill is a professional pillar drill designed for metalworking, developed for drilling and tapping in industrial environments. Thanks to its robust construction, large spindle travel, and automatic tapping function, the machine delivers excellent performance and precision when machining metals, especially structural steel. Key features of the machine: - Automatic tapping function with left-hand reverse – fast and safe threading up to M16 in steel. - High structural rigidity – the 85 mm diameter column and seasoned cast-iron headstock, base, and table ensure stability and vibration damping. - 135 mm spindle stroke – enables deep drilling without the need to reposition the workpiece. - Belt drive – five precisely matched spindle speeds ranging from 280 to 1875 rpm. - Guards with limit switches – CE compliant, increased operator safety. - Large worktable with 360° rotation and T-slots – flexibility in clamping workpieces. Construction and technology: The CORMAK WS20 bench drill for metal features a design based on high-grade materials. The spindle and gearbox shafts are made from hardened steel for wear resistance. The headstock, column, and table are manufactured from precisely machined, seasoned castings, ensuring the rigidity of the entire assembly. The Morse taper MK2 allows fast tool changes and the use of various working tools. Cjdpfsrif Trox An Hjrc Precision and work efficiency: Thanks to the rigid column, large spindle travel, and refined transmission, the machine enables precise and repeatable hole making and threading. The clear control panel facilitates operation, and the powerful 1.1 kW motor allows efficient work even in hard-to-machine materials. Application: The CORMAK WS20 pillar drill is ideally suited for use in: - industrial plants, - mechanical workshops, - maintenance departments, - technical schools and training centers. This machine is intended for drilling and tapping steel, aluminium, and non-ferrous materials. Standard equipment: - Keyed drill chuck - Morse taper drift - U-type spindle guard with safety interlock - Belt drive guard with limit switch Technical specifications: Parameter Value Maximum drilling diameter (steel): 20 mm Maximum tapping diameter (steel): M16 Spindle stroke: 135 mm Spindle taper: MK2 Speed range: 280–1875 rpm Number of speeds: 5 Column diameter: 85 mm Column wall thickness: 12.7 mm Spindle-to-column distance: 260 mm Spindle-to-table distance: 366 mm Spindle-to-base distance: 678 mm Table dimensions: 300 × 320 mm Base dimensions: 376 × 566 mm Motor power: 1.1 kW Supply voltage: 400 V Net weight: 179 kg Machine dimensions: 800 × 450 × 1250 mm

Būklė: geras (naudotas), Gamybos metai: 1985, mašinos/transporto priemonės numeris: 16924, Offer 22090 Technical Data: - Drilling capacity in steel ST 60: 20 mm - Spindle taper: MT 2 - Spindle travel: 120 mm - 4 spindle speeds: 400 – 2000 rpm - Throat depth: 250 mm - Max. distance table to spindle: 720 mm - Table with 2 T-slots: 440 x 360 mm Cjdetz T Dvjpfx An Hjrc - Height adjustable via rack and pinion with hand crank - Drive: 380 V / 0.6 kW - Required space approx.: W 550 x H 1900 x D 850 mm - Weight approx.: 260 kg - Includes: drill chuck 3 – 12 mm

Gamybos metai: 2000, būklė: geras (naudotas), mašinos/transporto priemonės numeris: 84061, Offer 22629 - Air-cooled AC/DC welding system, mobile - Suitable for welding all weldable metals - e.g. stainless steel, steel, aluminium, brass, etc. - TIG welding current steplessly adjustable from 20 A up to 270 A at 35% duty cycle - …A at 100% duty cycle - Connection: 400 V - Equipped with: - Digital welding current display - Arc frequency control - HF ignition Cjdpjixp D Uefx An Hjrc - Pulse function - Hose package, 5 m - Pressure regulator - Ground cable - Trolley - Required space approx.: W 550 x H 1150 / 1300 x D 950 mm - Weight approx.: 180 kg

Būklė: naudotas, Bending tool, die, upper blade, upper tool, gooseneck tool for press brake Crjdpfehablwex An Hec - Tool for press brake: segmented, 17 pieces - Tool angle: 30° - Dimensions: 145 x 35 mm - Total length: 2675 mm - Individual segment lengths: 7 x 250 mm / each 1 x 175/170/90/85/80/75/70/65/60/55 mm - Transport dimensions: 600/400/H170 mm - Weight: 63.2 kg

Būklė: naudotas, TIG welding machine, inverter welding machine, TIG welder, inverter welder - Manufacturer: Ess, TIG and manual electrode welding machine, water-cooled - Model: THYROARC 3 AC/DC, direct and alternating current - Incl.: ground cable, gas regulator, hose package 7500 mm long Crodpfsfwg H Hox An Hjc - Welding output: max. 280 A, see nameplate - Dimensions: 1300/570/H900 mm - Weight: 262 kg

Būklė: geras (naudotas), MERKLE Insquare W 300 AC/DC welding machine with original hose package Primary: Voltage: 3 x 400 V Frequency: 50 (60) Hz cos phi: 0.95 TIG DC range: Open-circuit voltage: 80 V Operating voltage: 10-22.8 V Welding current: 5-320 A Duty cycle 60% @ 320 A (10 min) Csdpfx Aol Sm Hben Hsrc Duty cycle 80% @ 300 A (10 min) Duty cycle 100% @ 260 A (40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary peak current: 19 A TIG AC range: Open-circuit voltage: 80 V Operating voltage: 10-22.8 V Welding current: 5-320 A Duty cycle 60% @ 320 A (10 min) Duty cycle 80% @ 300 A (10 min) Duty cycle 100% @ 260 A (40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary peak current: 19 A Electrode welding operation: Stick electrodes: 1.5-6 mm Open-circuit voltage: 80 V Operating voltage: 20-32.8 V Welding current: 5-320 A Duty cycle 60% @ 320 A (10 min) Duty cycle 80% @ 300 A (10 min) Duty cycle 100% @ 260 A (40°C) Primary continuous power: 13.1 kVA Primary continuous current: 19 A Primary peak current: 22 A Welding processes: 10-position switch: TIG DC Negative, TIG DC Positive, TIG DC Negative with starting pulse, TIG AC low-noise, TIG AC square wave, TIG AC "Balanced TIG", Electrode Negative Electrode Positive Electrode "Sine" Electrode Square wave Selector switch 1: 10-position switch: Current 1, Time 1, Up- and down-slope time, Start current, End current, Ignition pulse, Spot time, Pre-flow and post-flow gas time Selector switch 2: 9-position switch: Current 2, Time 2 (for pulse operation), AC balance, AC frequency, Hot-start time and current, Current post-adjustment, Electrodes d, Voltage display Settings: 2 rotary encoders for selector switch 1 and 2 Displays: 2 LED displays with preview and hold function for current, voltage, time, frequency Time functions: 4-position switch: OFF, slow pulsing, fast pulsing, spot welding Ignition: 4-position switch: OFF, high frequency, Lift-TIG Energy control: 4-position switch: at the unit, Hand or foot remote, Welding torch Operating mode: 4-position switch: 2-step, 4-step, 4-step with 2 currents, Gas test, Test, Program Program memory: 20 freely assignable memory locations AC frequency: 50-200 Hz AC balance: 9-91 % Pre-flow gas time: 0-3 s Post-flow gas time: 0-25 s Current up-slope time: 0-2 s Current down-slope time: 0-20 s Ignition pulse: 0-100 ms Spot time: 0.1-2.5 s Slow pulsing: 10 ms-2.5 s Fast pulsing: 50 Hz-5 kHz Hot-start time: 0-1.5 s Hot-start current: 10-200 % Current post-adjustment: 100-250 % Button: Safety device test Button: Program selection LED: Power ON, Overtemperature, Fault, Protective circuit, Display hold, Start current rise, Current 1, Current 2, Slope-down, End current Power source: IGBT inverter Ignition: High frequency or Lift-TIG Standard: EN 60974-1 "S" / CE Torch connection: EURO central connector with 5-pin plug Torch cooling: Water recirculation cooling system Socket 50 mm²: Workpiece cable Socket 50 mm²: Electrode welding cable Mains connection: 4 x 4 mm², 5 m length Gas supply hose: 2 m Weight: 130 kg (300 AC/DC) Dimensions L x W x H: 910 x 600 x 910 mm with cylinder holder Gas cylinder holder: 10 - 20 - 50 l cylinders Financing through our bank is also possible. komplett-konzept.leasingo.de More items – new and used – can be found in our shop! International shipping costs on request!