Klimato bandymų kamera

Espec PR-3KP

Veikimo valandos: 56 530 h, Sąlyga: geras (naudotas), The Platinous K Series embodies a design concept focused on energy savings, reduced maintenance requirements, and improved recycling of natural resources after decommissioning. High-precision temperature and humidity control across a wide range. The cooling system, equipped with an electronically controlled automatic expansion valve, enables highly precise single-stage regulation of temperature and humidity—from +10 °C for temperature and from 20% RH for humidity (ranging from +70°C to +85°C). Prevention of condensate dripping from the wick tray: The arm and drain of the wick tray are integrated to prevent any contained condensate from dripping. The wick tray features an automatic water supply system, reducing the risk of splashing caused by pressure fluctuations. Space-saving vertical exhaust system (air cooling system): The heat from the chamber is discharged vertically through a ceiling-mounted port, allowing you to save space normally required behind the equipment. Large observation window Water supply system with cartridge tank Specifications: Manufacturer: Espec Type: PR-3KP Platinous K Series Temperature range: -20 to +100 °C Humidity range: 20 to 98% RH Refrigerant R-404A: CFC-free – ozone friendly Vertical laminar-flow circulation HEPA filter 50 mm (2 inch) cable port on the side Single-stage cooling with water-cooled condenser Heated observation window Weight: 375 kg Operating hours: 56,530 Tedpfx Ajr H Dr Nog Rjf Dimensions: External dimensions (HxWxD): 1680 x 1050 x 1200 mm Chamber dimensions (HxWxD): 850 x 600 x 800 mm (408 l) Further items in other sizes—new and used—can be found in our shop! International shipping rates available upon request!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, Galia: 6,5 / 9,4 kW Todpfom Exdwsx Ag Rsf Savas svoris: 365 kg Šių įrenginių turime keletą! Pakrovimas ir/arba siuntimas galimi!

Sąlyga: labai geros būklės (naudotas), Here we offer a Vötsch shock test chamber. Water-cooled temperature shock test cabinet Two-chamber design Hot Chamber: The temperature range of the hot chamber is from +50°C to +220°C Temperature deviation over time at the center of the usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 11 K/min Cold Chamber: Temperature range of the cold chamber: -80°C to +70°C Temperature deviation over time at the center of the usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate: Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber dimensions: width 470 mm, depth 650 mm, height 410 mm External dimensions: width 930 mm, depth 2,115 mm, height 1,970+ mm Port diameter: ∅ 67 mm Nominal power: 10 kW Nominal current: 25 A Voltage: 3/N/PE AC 400V +6/-10% 50Hz Refrigerants: R404A / R23 Weight: 1,000 kg For your security as a buyer, please note the following information! The following procedures are performed on our offered chambers in advance: 1. Functional inspection and replacement of necessary components 2. New charge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a test run monitored with calibrated equipment. Model: VT 7012 S2 Condition: used Scope of delivery: (See picture) Tsdpfx Aeigg Hnog Rjf (Specifications and technical data subject to change and errors reserved!) Further questions can be answered by phone.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, Vötsch Shock Test Chamber VT 7012 S2 Systems for Extreme Temperature Changes Temperature shock testing determines the resistance of components, devices, and other products to rapid changes in ambient temperature. Test specimens are subjected to rapid temperature changes in air, alternating between upper and lower temperature limits. These cyclic loads and accelerated aging caused by temperature changes can reveal potential weaknesses in the specimen. Vertical chamber arrangement Ball screw drive for secure tray movement Tray load capacity: 50kg (VT3 7012 S2) All-around mesh in tray secures specimens High air circulation rate, short temperature transition times, and uniform temperature distribution in the test chamber Hot chamber can be used as a temperature storage unit, cold chamber as a temperature cycling unit Touch panel for convenient editing of simulation programs with graphical display Minimal energy consumption No compressed air required Manufacturer: Vötsch Model: VT 7012 S2 Type: Temperature Shock Test Chamber Test chamber volume: 120 l Rated voltage: 400 V Rated power: 10 kW Rated current: 25 A Refrigerant: R452A External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Year of manufacture: 2005 Protection class Device: IP 42 Control panel: IP 20 Switch cabinet: IP 54 Key values for temperature tests in single-chamber operation | Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temporal temperature deviation: ±2 K (At steady-state) Spatial temperature deviation: ±2 K (At steady-state in the tray) Heating rate hot chamber: 11 K/min Cooling rate cold chamber: K/min Heating rate cold chamber: 2 K/min Cooling rate hot chamber: K/min Observation window: 355 x 355 mm Port diameter: 67 mm Weight: 1000 kg More new and used items available in our shop! International shipping costs on request! Tedpfxeph Uz Uo Ag Rof

Gamybos metai: 2012, Sąlyga: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Feutron climate chamber Type: 3703/13 Humidity: 70% Year of manufacture: 2012 See more information in the attachments Door is damaged (paint damage) Tedpfxjvwm Nuo Ag Rjf

Gamybos metai: 1995, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SB11/300/40, For sale is a Weiss climate test chamber. Model: SB11/300/40 Temperature range (cooling/heating mode): -40...+180°C Climate operation temperature range: +10...+95°C Humidity range: 10...98% relative humidity (r.H.) Temperature stability: - In climate mode: ±0.1...±0.5 K over time - In cooling/heating mode (without climate): ±0.2...±0.5 K over time Humidity stability: - In the entire working range: ±2...±3 % r.H. over time Tjdpew Dygfofx Ag Rsf Condenser: air-cooled Temperature change rate: - Cooling: approx. 3.1 K/min - Heating: approx. 3 K/min Test chamber volume: approx. 301 L Internal dimensions: Height 680 mm, Width 540 mm, Depth 820 mm External dimensions: Height 1700 mm, Width 800 mm, Depth 1780 mm Weight: approx. 420 kg / Connected load: 4.8 kVA Electrical connection: CEE plug 16 A Connection voltage: 400V / 3Ph+N+PE / 50 Hz (+6%/-10%) Refrigerant: R404A Design: mobile Type: SB11/300/40

Sąlyga: geras (naudotas), Type: VCS 7034-5 Climate Test Chamber, Water-Cooled Vötsch VCS 7034-5 Test Chamber Volume: 335 litres Performance for Temperature Testing: Temperature Range: -70 to +180°C Temporal Temperature Deviation: ±0.1 to ±0.5 K Spatial Temperature Deviation: ±0.5 to ±2.0 K Temperature Gradient: 1 to 4 K Change Rate: Cooling: 6.7 K/min Heating: 6.8 K/min Heat Compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature Calibration Values: +23°C and +80°C Performance for Climate Testing: Temperature Range: +10 to +95°C Temporal Temperature Deviation: ±0.1 to ±0.3 K Spatial Temperature Deviation: ±0.5 to ±1.0 K Temperature Gradient: 1 to 2 K Humidity Range: 10 to 98% Temporal Humidity Deviation: ±1 to ±3% Dew Point Range: -3 to +94°C Heat Compensation: 400 W Climate Calibration Values: +23°C / 50% RH and +95°C / 50% RH Test Chamber Dimensions (W x D x H): 580 x 765 x 750 mm Tjdpfxsxmhyco Ag Rjf External Dimensions (W x D x H): 870 x 1595 x 1775 mm Electrical Connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated Power: 10 kW Rated Current: 21 A Sound Pressure Level: 64 dB(A) Cooling Water Consumption: 1.4 m³/h Refrigerant: R452A / R-23 Important Information for Buyers – Your Safety! The following steps are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant as needed 3. Leak test with certificate 4. Upon successful inspection, chambers undergo documented test runs. Condition: used Scope of delivery: (see picture) (Technical data, specifications, and information are subject to change and errors!) For further questions, please feel free to contact us by phone.

Sąlyga: labai geros būklės (naudotas), Espec Model: PSL-2KPH Thermo TEC Espec Temperature and Climate Test Chamber, Air-Cooled Temperature range: -70°C to +150°C Humidity range: 20 to 98% RH Temperature / humidity fluctuations: ±0.3°C / ±2.5% RH Temperature / humidity stability: ±0.5°C / ±3% RH Heating time: from -70°C to +150°C within 50 min Cooling time: from +20°C to -70°C within 80 min Test chamber dimensions: width 600 mm x height 850 mm x depth 600 mm External dimensions: width 1010 mm x height 1690 mm x depth 1173 mm Test chamber volume: 306 liters Refrigerants: R-404A, R-508A Stainless steel construction Connection: AC 400V 3-phase 50/60 Hz, max. 18 A Todew D Dgvspfx Ag Ref Rated power: 1.5 kW Net weight: approx. 400 kg For your safety as a buyer, the following information: The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilled with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, monitored with calibrated equipment. Condition: used Scope of delivery: (see picture) (Specifications and data are subject to change and error!) For further questions, we will be happy to assist you by phone.

Sąlyga: geras (naudotas), Type: VCS 7034-5 Water-cooled Climate Test Chamber Vötsch VCS 7034-5 Test Chamber Volume: 335 liters Specifications for Temperature Testing: - Temperature range: -70 to +180°C - Temporal temperature deviation K: ±0.1 to ±0.5 Tsdpfxexgd Rde Ag Ref - Spatial temperature deviation K: ±0.5 to ±2.0 - Temperature gradient: 1 to 4 - Rate of change: - Cooling: 6.7 K/min - Heating: 6.8 K/min - Heat compensation at +20°C: 3000 W / at -20°C: 3000 W - Temperature calibration values: +23°C and +80°C Specifications for Climate Testing: - Temperature range: +10 to +95°C - Temporal temperature deviation: ±0.1 to ±0.3 K - Spatial temperature deviation: ±0.5 to ±1.0 K - Temperature gradient: 1 to 2 K - Humidity range: 10 to 98% - Temporal humidity deviation: ±1 to ±3% - Dew point range: -3 to +94°C - Heat compensation: 400 W - Climate calibration values: +23°C / 50% RH and +95°C / 50% RH Test Chamber Internal Dimensions: - Width: 580 mm - Depth: 765 mm - Height: 750 mm External Dimensions: - Width: 870 mm - Depth: 1595 mm - Height: 1775 mm Electrical Connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated Power: 10 kW Rated Current: 21 A Sound Pressure Level: 64 dB(A) Cooling Water Consumption: 1.4 m³/h Refrigerants: R-404A / R-23 For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If needed, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Sąlyga: geras (naudotas), RS Simulators Type: Walk-in Climate Simulation Chamber KKC 22/45 Technical data: Temperature range: -40...+120 °C Temperature tolerance: +/- 1.5°C Temperature change rate: 1 K/min Humidity range: 10...approx. 95% rH Tsdpfxouviydo Ag Rof Humidity tolerance: +/- 5.0% rH Dimensions: Test chamber volume: 22 m³ External dimensions (W x D x H): approx. 2600 mm x 6400 mm x 2800 mm Test chamber (W x D x H): approx. 2200 mm x 4700 mm x 2300 mm Door opening (W x H): approx. 2200 mm x 2300 mm Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors excepted!) If you have further questions, we will be happy to answer them by phone.