Vertikalus CNC apdirbimo centras

Enshu 450 V

Gamybos metai: 1985, Sąlyga: naudotas, Workpiece diameter: 25–90 mm Thread length: 3,000 mm Thread pitch: 2–16 mm Total power requirement: 25 kW Machine weight approx.: 10.5 t Space requirement approx.: m O F F E R We can offer you the following, subject to prior sale and errors excepted, ex stock without obligation. WALDRICH COBURG Whirling machine / peeling machine for the production of threads, worms, ball screws or similar components Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Thread diameter: 25 – 90 mm Max. thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Pitch angle max. up to Ø 55 mm: 15° Pitch angle max. descending up to Ø 90 mm: 8° Whirling head speed, stepless: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore diameter of clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive approx.: 25 kW – 380 V – 50 Hz Weight: approx. 10,500 kg Accessories / special features: • Robust whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests, integrated with prism guides. Manual thread depth adjustment and optical pitch angle setting on the support. • Powered tool head, normally equipped with 4 tools: 2 roughing tools, 1 flank tool, 1 deburring tool. • Workpiece speeds and pitch feed are finely adjustable using change gears. Separate rapid traverse for resetting the whirling slide. • Simple indexing unit for whirling multi-start threads. • Additional setup for whirling threads longer than the centre distance with intermediate support. • For correcting lead-screw errors, thermal expansion of the workpiece, or errors during additional setups, the machine is equipped with a compensation device. This enables both an electronically programmed compensation of the lead-screw as well as workpiece-specific linear compensation using a wedge system. • Motorized tailstock adjustment with automatic stop by contact pressure sensor. Pgodpfx Afotzdyzo Njg • Comprehensive accessories including cutting tools, toolholders, collets, accessory parts, setting devices, gauges, and operating tools. • Central lubrication, coolant system, separate control cabinet, operating manuals. The machine is suitable for roughing and finishing of single and multi-start right- and left-hand threads, worms, ball screws or similar workpieces!

Sąlyga: paruoštas naudoti (naudotas), X ašies eiga: 750 mm, Y ašies eiga: 750 mm, Z ašies eigos atstumas: 725 mm, Įranga: dokumentacija / vadovas, drožlių transporteris, 4-axis machining center, year of manufacture 2016, control system: Siemens 840D Solution Line, NC rotary table 360 x 0.001 degrees, dual pallet changer, pallet size: 500 x 630 mm, 60-position tool changer, tool holder HSK63, internal coolant supply (IKZ), Knoll PF 210/1750 gravity belt filter, Hyfra TKR 30 coolant temperature control, Knoll 450 K-1 scraper conveyor, infrared measuring probe. Pgodorx Sh Ajpfx Af Njg

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machining length: 200 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 8,000 [rpm] - Spindle drive power: 1.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 10 - Number of live tool positions: 5 Pgedpfxsuhazgo Af Nsg - Driven tool speed: 5,000 [rpm] FRONT TOOL POST - Number of positions: 4 SUB SIDE MACHINING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 [V] DIMENSIONS AND WEIGHT - Installation space: 2,110 x 1,085 [mm] - Machine height: 1,832 [mm] - Machine weight: 2,200 [kg] MACHINE HOURS - Operating hours: 32,264 [h] EQUIPMENT - Control: Meldas - Driven guide bushing - Parts catcher - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Bar feeder: FMB MINIMAG 20

Sąlyga: naudotas, Gamybos metai: 2004, Technical details: Faceplate diameter: 4770 mm Swing diameter: 7000 mm Turning height: 1000 mm Ram stroke: 1000 mm Max. workpiece weight: 100,000 kg Faceplate speed range: 2 – 20 rpm Feed rate: 1 – 10,000 mm/min Rapid traverse: 10 m/min Ram dimensions: 250 x 250 mm Main motor: 100 kW Psdpevb Hlwofx Af Nsgg Total power requirement: 200 kW Equipped with CNC SIEMENS 840 D 2 vertical supports with 12-position tool changer C-axis with driven tools SK 50, 37 kW, 3000 rpm Chip conveyor and coolant system

Sąlyga: naudotas, Technical Details: Spindle diameter: 130 mm Drilling depth: 1,380 mm X-travel: 2,500 mm Y-travel: 1,600 mm Z-travel: 380 mm Psdpjvr S Ulsfx Af Njgg W-axis: 900 mm spindle feed U-axis: 320 mm facing slide feed Control system: on request Tool holder: ISO SK50 Speed – facing slide: 4.5–180 rpm Drive spindle speed: 4.5–900 rpm Feed – x/y: 5–2,000 Total power requirement: approx. 40 kW Machine weight approx.: < 35 t plus auxiliary equipment The machine can be offered in four different sales options. Please choose! 1. The machine is in as-new mechanical condition, as it stands. 2. The machine as it stands, including plate table 4,000 x 2,000 x 300 mm = Stock No. 1101081 3. The machine rewired, with new control cabinet, digital readout, 4-axis, Siemens AC drives, Siemens axis motors (50A/31Nm) with 12 month warranty on all new parts. 4. Additional accessories can also be optionally offered, e.g. coolant system, chip conveyor, enclosure, etc. Please contact us to discuss these options.

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2002, Technical specifications are subject to change without prior notice. Axis travel ranges of the CERUTI 25 model: X-axis: Travel range 10,000 mm, electrical emergency overtravel 2 mm (max), mechanical emergency overtravel 50 mm. Y-axis: Travel range 2,500 mm, electrical emergency overtravel 2 mm (max), mechanical emergency overtravel 50 mm. Z-axis: Travel range 1,000 mm, electrical emergency overtravel 2 mm (max), mechanical emergency overtravel 50 mm. A-axis: Travel range +/- 95°. C-axis: Travel range +/- 200°. T-axis: Continuous motion. Operating speeds of the linear axes: X, Y, Z axes: 20,000 mm/min. Pgjdsv D U Ifopfx Af Njg Axis accelerations: X-axis: 1,000 mm/sec². Y, Z axes: 1,000 mm/sec². Note: Accelerations may vary depending on the installed CNC control unit. Spindle: Type: ISO 40, ISO 50, electrospindle HSK A63. Power: 30 kW. Torque: 280 Nm. Maximum speed: 12,000 rpm. Mounted tool holder type: HSK A63. S.G.M. tool changer: Number of positions: 20, 30, 74. Maximum tool diameter for adjacent positions: 100 mm. Maximum tool diameter for non-adjacent positions: 200 mm. Maximum length: 300 mm. Maximum tool weight: 12 kg. Tool change time: 20 sec.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, veleno veikimo valandos: 4 486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX control panel Operating hours: 146,161 h X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Clamping Table Clamping surface: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis Milling Head AC3 (2003) Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Linear Axis Drives Feed rate X-, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X-, Y-, Z-axis: up to 1.5 m/s² Connection Data Connected load: 40 kW Main fuse: approx. 80 A Dimensions, Weights Space requirement machine with peripherals: approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Psdpfxow Au H Ro Af Nsgg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: turquoise Additional Equipment - 18-position chain tool changer - 3-sided enclosure, without extraction ducts Machine Condition Fully functional, very good condition. Dismantled, stored, and available immediately.

Gamybos metai: 1997, Sąlyga: paruoštas naudoti (naudotas), Travel X/Y/Z: 1300mm/1100mm/1000mm, Table dimensions X/Y: 800mm/800mm, Number of pallets: 14, Maximum table load: 2200kg, Table indexing: 0.001°. Spindle speed: 7000rpm, Spindle power: 50HP, Tool magazine: 80. Dimensions X/Y/Z: approx. 7000mm/3400mm/3800mm, Weight: approx. 24000kg. An on-site inspection is possible. Podjtx Dn Ujpfx Af Njgg

Sąlyga: naudotas, Gamybos metai: 1981, mašinos/transporto priemonės numeris: 78.977, Įranga: dokumentacija / vadovas, Pagaminimo metai: 1981 / Rekonstrukcijos metai: 1996/1997 Valdymas: Siemens 840 C Siemens valdymas X/Y/Z/W/U/B/V ašims Veleno skersmuo: 200 mm Pagrindinis Siemens variklis: 68 kW Veleno apsukos: I pakopa: 3 - 202 aps./min II pakopa: 180 - 808 aps./min X eiga: 12 000 mm Pgsdpfx Afoqc Umgo Nog Y eiga: 4 500 mm Z eiga: 2 400 mm (laikiklio mova □ 520 mm/eiga 1200 mm + W ašis 1200 mm) Tvirtinimas: SK60 (SK50) Paletinis slankiklis: taip Frezu galva: 2 vnt. Paruošta CNC rotaciniam stalui (4 ašis) Be rotacinio stalo ir plokštelės (galima įsigyti atskirai) Pilna dokumentacija Svoris: apie 140 tonų Yra video!

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT50 - Spindle drive power: 40 [kW] - Spindle speed: 12,000 [rpm] - Gearbox - Number of spindle speed ranges: 2 LINEAR AXES - Travel X/Y/Z axes: 2400/1650/1750 [mm] - Rapid traverse speed (X/Y/Z): 42 [m/min] - Feed rate (X/Y/Z): 20 [m/min] SWIVEL AXIS B - Travel: 360 [degrees] - Minimum resolution: 0.001 [degrees] TOOL CHANGER - Tool changer type: Bras charger - Number of tools in magazine: 116 - Tool change time: 3.8 [sec] PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 1600 x 1250 [mm] - Number of pallets: 2 - Max. pallet load: 5000 [kg] - Distance from table centre to spindle nose: 100 - 1750 [mm] - Max. workpiece diameter: 2500 [mm] - Max. workpiece height: 1850 [mm] Podpfow Ephbsx Af Nogg ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive capacity: 86 [kVA] WEIGHT AND DIMENSIONS - Required space: 9,485 x 6,155 [mm] - Machine height: 4,370 [mm] - Machine weight: 50,000 [kg] MACHINE HOURS - Operating hours: 15,446 [h] ACCESSORIES - Controller: Fanuc 31i-model B5 Interface: Ethernet / RS232 / USB / PCMCIA - SOFT SCALE II - Electronic hand wheel - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 70 [bar] * internal coolant supply (IKZ) * with paper filter * with coolant chiller * with rinse gun * with cabin wash - Chip conveyor - Spindle cooling - Tool probing system - Workpiece probing system: Renishaw RMP60 - Tool breakage monitoring: SOFT AC - Number of pallets: 2 - Vise - Tool holder