Dvi galvutės pjovimo staklės

Emmegi Sirio 2

Gamybos metai: 1993, būklė: naudotas, Max. cutting length: 5000 mm Max. saw blade diameter: 450 mm Automatic positioning of length as well as angles (90° or 45°) Travelling roller conveyor Pgjdpfovdp Rzox Ahver Material support Minimum quantity spray device

Būklė: geras (naudotas), Gamybos metai: 1994, 2-sided planer, top and bottom Constant table height (consistent infeed height) Max. planing width: 600 mm Max. planing height: 280 mm Planer heads with strip knives Immediately ready for operation Pgsdpfx Ahjhuthysvsr

Būklė: naujas, Vacuum Lifter BARBARIC B3, pivotable, incl. crane - Demonstration unit - Included: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg capacity Vertical and horizontal handling of flat, standard commercial boards (laminated boards, natural wood boards) up to a board size of 3,000 x 2,100 mm - Tilting range of 90° with pneumatic tilt mechanism - Complete version with hoist and appropriate safety devices (vacuum gauge and hand-operated slide valve with mechanical lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable beam (beam length: 1,500 mm) Included: - Option: reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg with 2 oval suction pads, 500 x 250 mm, on an adjustable beam (beam length: 1,250 mm) and reinforced vacuum pump for porous materials. The reinforced version enables lifting of materials up to 250 kg. Included: - Option: BARBARIC uniWood comfort control All controls for the hoist and the vacuum lifter are combined in a single control unit—our special handling grip. This allows single-handed operation of the system and the load. The lifting process can be continuously regulated via frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum gauge and two-button safety control for load release). Included: - BARBARIC column-mounted slewing crane Load capacity at hoisting device: 250 kg The specified capacity refers to the effective load at the hoist. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. Pgodpfx Aju R Szaohver SSK consisting of column, console, and low-friction jib arm. Manual slewing and trolley travel. A suitable reinforced concrete floor (C20/R5, min. 20 cm) is required for installation. The static assessment of the floor must be provided and documented by the client. For installation on cracked concrete or ground with low load-bearing capacity, larger base plates are available upon request. Mounting: supplied with adhesive anchors for concrete floor. If ordered without hoist, please specify the desired cable or hose arrangement! Delivery includes: trolley, power supply, and compressed air connection. - New exhibition machine -

Būklė: naujas, Gamybos metai: 2025, Modern, high-performance, and versatile double mitre saw for wood, aluminium, and plastic profiles. Stock machine: Subject to prior sale - Large cutting area (165 mm cutting depth at table level) - Double cuts possible - Intermediate angles steplessly lockable Pedpoxta Tusfx Ahvogr - Pneumatic tilting as standard - Hydropneumatic saw feed, infinitely adjustable - Torsion-resistant machine bed - Swivel range for both units: 22.5° inward, 90°, 135° outward - Precision-ground saw table / support plate - Direct position measuring system (magnetic sensor) in all versions - JETTER drives and controls - 15″ industrial touch panel (IP65)

Būklė: naudotas, Gamybos metai: 2018, Startech CN MAIN FEATURES FLEXIBLE AND INDIVIDUALLY CONFIGURED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP SIDE OF THE PANEL ALLOWS FOR ABSOLUTE PRECISE PROCESSING NUMERICAL CONTROL WITH 7" COLOUR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Working area drilling/grooving mm 0 x 800 / 0 x 800 Stroke of X-axis mm 750 Max. traversing speed X-Y axes m/min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y, one shared) Horizontal spindles (along Y-axis) number 2 (1+1) Horizontal spindles (along X-axis) number 1 Fixed groove saw (direction) X Diameter of groove saw mm 100 Max. thickness of groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Groove saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m³/h 1200 Extraction air speed m/sec 20 Extraction connection diameter mm 120 GENERAL FEATURES Universal CNC drilling machine with a working table with fixed gantry and moving workpiece for performing the following operations: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Grooving with an integrated groove saw in the 'X' direction Self-supporting structure Machine base made of steel tubular construction to provide a large base for accommodating the working table. The structure rests on 3 self-levelling feet. The electrical control cabinet is integrated into the machine base. Central Bakelite support table 'Easy Motion': - an MDF sector for through drilling, automatically retractable for horizontal drilling - an infeed roller to facilitate panel loading - a rear roller track to ease panel sliding - left and right stops - a central alignment device with manual adjustment The left and right stops must be used to drill horizontally in the 'X' direction on the two opposite panel sides. Panel positioning along the X-axis is via vacuum suction cups. Aggregates carrier This is a gantry structure made from steel tube. The main working unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - drill shank D10 mm - spindle pitch 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill bit, 1 double drilling head in Y direction (1 + 1, drill shank D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - pneumatic vertical travel per spindle 70 mm - pneumatic horizontal travel of the drilling unit Workpiece positioning and drive of the working unit A CNC-controlled vacuum cup clamps and positions the workpiece sequentially under the working unit during processing. Movement along the X and Y axes is on THK guides with motion transmission via reinforced toothed racks. Z-axis movement is pneumatic on ball-bushing guides with stop position adjustable via the unit's positioning. Working unit positioning uses advanced drive and technology. -CONTROL The control software is specifically designed for use Pgjdpfovwbp Ajx Ahver

Būklė: naudotas, Gamybos metai: 2022, Dvigalvė elektroninė pjovimo staklė – PERTICI 500TS / 500TS-22 PERTICI INDUSTRIES dvigalvė elektroninė pjovimo staklė, skirta aukšto tikslumo PVC profilių ir lengvųjų lydinių pjovimui. Staklės turi fiksuotą kairiąją galvutę ir judrią dešiniąją galvutę, kuri yra valdoma elektroniniu būdu ir automatiškai reguliuojama tiek tiesine, tiek kampine kryptimi. Idealiai tinka profesionaliai langų ir durų konstrukcijų gamybai. Pagrindinės savybės: - Dviguba automatinė galvutė - Judri dešinioji galvutė su automatiniu padėties nustatymu - Automatinis galvučių sukimasis: - 90° / 45° (500TS) - Programuojamas elektroninis valdymas - 15 colių TFT Touch Screen ekranas - USB ir Ethernet prievadai - Windows CE / Windows Embedded operacinė sistema - Optimizuotas pjovimo sąrašų valdymas - Automatinis profilio aukščio koregavimas - Galimybė dirbti naudojant tik vieną galvutę - Visapusiškos pneumatinės saugos apsaugos - Dvi rankomis valdomas pjovimo įrenginys Apdirbami paviršiai: - PVC - Plastikai - Lengvosios lydiniai / aliuminis Pjovimo talpa: Ilgis: 4 000 mm Disko skersmuo 500 mm (pasirinktinai 520 mm) Pgjdpfxoy Rl Syo Ahver Automatiniai pjovimo kampai: 90° 45° Techniniai duomenys: - Disko skaičius: 2 - Variklių galia: 4,4 kW (kiekvienam) - Disko greitis: 2800 aps./min. - Maitinimas: 400 V trifazis - Oro slėgis: 6,5–8 bar Svoris: apie 1670 kg Disko periferinis greitis: iki 76,2 m/s Komplektacija: - Horizontalios ir vertikalios pneumatinės užspaudos - Šoniniai ritininiai laikikliai - Visapusiškos pjovimo zonos apsaugos - Paruošta pramoninio etikečių spausdintuvo jungčiai - 15 colių jutiklinis ekranas su Windows platforma - Profilio storio jutiklis (elektroninis prietaisas, skirtas profilio storiui matuoti) – nuotrauka Nr. 7 - Centrinis profilio atraminis taškas, apsaugantis nuo deformacijos – nuotrauka Nr. 8

Būklė: naujas, Gamybos metai: 2025, Gannomat Concept 70 Eco Lamella Carcase Clamp with Rapid Traverse Technical Data: Pgodpfeiidm Nsx Ahver Lamella carcase press from our showroom; Working range: width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcase joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set by frequency inverter, thus the torque transmission is completely wear-free. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to stepless max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to stepless max. 2,200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated into the beams; pressing speeds of 5/10/25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for clamping special parts. - Inch mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcases at 45 degrees. Simple operation via 6 separate push-buttons, freely adjustable pressing time preselection with automatic opening, feeding height 300 mm. The machine is on display in our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, galia: 9 kW (12,24 AG), įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, X ašies eiga: 2 200 mm, Y ašies eiga: 2 900 mm, Z ašies eigos atstumas: 350 mm, ruošinio ilgis (maks.): 2 800 mm, ruošinio plotis (maks.): 2 100 mm, ruošinio aukštis (maks.): 300 mm, ašių skaičius: 3, įrankių magazino lizdų skaičius: 12, pavaros tipas: elektrinis, bendras aukštis: 2 275 mm, bendras ilgis: 4 060 mm, bendras plotis: 3 315 mm, bendras svoris: 1 700 kg, Įranga: dokumentacija / vadovas, 2128 PANA ATC is a next-generation DANIBRUM CNC router, developed for modern workshops and production units seeking high productivity, consistent precision, and efficient automation in a fully integrated single machine. Equipped with a 12-position automatic tool changer (ATC) and ISO30 tool holding system, the machine enables fast tool changes and extensive flexibility for processing a wide range of materials: chipboard, MDF, solid wood, plastics, alucobond, and composites. Pgodpoymcncsfx Ahvor The machine’s robust construction features 25 mm linear guides, M1.25 helical rack drives, and 750 W servomotors, delivering rapid, smooth movements and precise positioning across all axes. The 9 kW air-cooled electrospindle, with speeds up to 18,000 rpm, is controlled by an 11 kW inverter for fine speed adjustment and stable load performance. The result is a reliable, fast, and versatile CNC router, tailored to the current demands of furniture production and industrial processing.

Būklė: naudotas, Gamybos metai: 1995, Cutting width: 375 mm Cutting height: 150 mm Saw blade dimensions: 500 x 30 mm Motor power: 2 x 3 kW Cutting length: 5100 mm Speed: 2800 rpm Air pressure: 6 bar Pgedpfxstv Rgrs Ahvsr Machine weight: approx. 700 kg Space requirement: approx. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Robust cast construction of the saw unit * Large cutting capacity, allows simultaneous cutting of 2 profiles * Easy adjustment of the movable unit via roller guide * Double bearing for the swivel device * Safe clamping system with two-pressure system * Double guide for the saw feed * Hydropneumatic saw feed * Correction scale for external dimensions * Left saw unit fixed * Swivel range 45°-90° * Incl. extraction unit (without piping) ALKO Mobil-Jet 100, year of manufacture 2002

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, LINIJOS YPATYBĖS 4 galvų suvirinimo aparatas FUSION 4H Rėmų nukrovimo įrenginys Pgodpfxey S E E Ns Ahvor Pirmasis frezavimo modulis Q-MATIC 1 Nuoseklus ryšys tarp suvirinimo ir valymo įrenginių Sukamasis stalas Elektroninis valiklis TRIMMER 4A Ištraukimo stalas Antrasis frezavimo modulis Q-MATIC 2 Linijos priežiūros nešiojamas kompiuteris Nupjovimo įrenginys Automatinio rėmų iškrovimo įrenginys