Orientavimo ir staklės
Emco Emcomat 17 D

Name: Emco Emcomat 17 D
Brand: Emco
Availability: InStock

Sąlyga

Naujas

Vieta

Mindelheim Vokietija

Orientavimo ir staklės Emco Emcomat 17 D

Rodyti žemėlapį

Duomenys apie mašiną

Įrenginio aprašas:: Orientavimo ir staklės

Gamintojas:: Emco

Modelis:: Emcomat 17 D

Sąlyga:: naujas

Kaina ir vieta

Pardavėjo vieta:: Biberkopfstraße 4, 87719 Mindelheim, Vokietija

Skambinti

Mašinų pardavimas

Ar jau įdėjote savo naudotos mašinos skelbimą? Parduokite per Machineseeker be komisinių.
Daugiau apie mašinų pardavimą

Pasiūlymo informacija

Sąrašo ID:: A3226977

Naujinta paskutinį kartą:: Data 2025.01.09

Aprašymas

Machine according to DIN 8605: Lathe with enhanced precision.

Centre distance: 700 mm
Centre height: 170 mm
Swing over bed: Ø 340 mm
Swing over cross slide: Ø 190 mm
Bed width: 260 mm
Longitudinal slide travel: 600 mm
Cross slide travel: 220 mm
Top slide travel: 110 mm
Cross slide length: 410 mm
Cross slide width: 150 mm
Bed carriage guide length: 380 mm
Tool shank cross-section: 20x20 mm
Distance centre - top slide: 34 mm
Top slide (compound rest) swivel range: 60/120°

Main spindle:
Spindle mount DIN 55029 (Camlock): S 5
Spindle bore: Ø 50 mm
Internal taper to DIN 7178: 1:22
Spindle diameter at front bearing: Ø 70 mm
Max. chuck diameter: Ø 200 mm
Max. faceplate diameter: Ø 200 mm
Spindle speeds: 40-3000 rpm
Fpjdpfx Acjdctnbousn
Speed control: Infinitely variable
Mechanical speed ranges: 4

Main drive:
Power at 40% duty cycle: 5.3 kW
Max. rated torque at the main spindle: 640 Nm

Feed:
20 (28) longitudinal feeds Z: 0.045-0.787 mm/rev
20 (28) cross feeds X: 0.023-0.406 mm/rev

Threads:
20 (28) metric threads (standard): 0.4 - 7.0 mm
32 inch threads (with optional gear set D3Z200): 56 - 4 TPI
28 module threads (with optional gear set D3Z200): 0.2 - 3.5
32 diametral pitch threads (with optional gear set D3Z200): 112 - 8

Tailstock:
Quill diameter: Ø 50 mm
Quill taper: MT 3
Quill stroke: 120 mm
Lateral adjustment: ± 13 mm

Permissible workpiece weights
Between centers: 50 kg
With tailstock support: 150 kg

Further basic equipment (standard accessories):
Including machine stand and integrated 3-axis digital readout, German, with color display
1 longitudinal stop
1 fixed center, taper 1:22, DIN 7178
1 fixed center MT3
1 tommy bar
1 key part
1 grease gun
3 hexagon bolts M16x60 - DIN 933
3 hexagon nuts M16-8 DIN 934
1 single tool holder
1 spanner A13x17 DIN 837
1 open-ended spanner SW 19
1 open-ended spanner SW 22
1 hex key SW 5
1 hex key SW 6
1 hex key SW 8
3 shear pins
1 electric cabinet key
1 operating manual including spare parts list
1 electrical documentation
1 test certificate
Packaging (for HGV transport with pallet and polyethylene hood)
Machine according to CE

Note: Images include special equipment/accessories!

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.

Tiekėjas

Paskutinį kartą prisijungęs: praėjusią savaitę

Registruota nuo: 2013

138 Skelbimai internetu

Skambinti

Pateikti užklausą

Telefonas & Faksas

+49 8261 ... skelbimai

Šie skelbimai taip pat gali jus sudominti.

mažas skelbimas

Varsseveld

1 202 km

CNC tekinimo staklės
EMCOEmcomat 17D

Skambinti

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2007, sukimosi skersmuo virš skersinio stumduko: 190 mm, tekėjimo ilgis: 700 mm, tekėjimo skersmuo: 340 mm, veleno skylė: 50 mm, Emco EMCOMAT-17D Atstumas tarp centrų: 700 mm Sukimosi skersmuo virš lovos: 340 mm Sukimosi skersmuo virš atramos: 190 mm Veleno anga: 50 mm Sukimosi greitis: 35–3000 aps./min Sukimosi greitis tolygiai reguliuojamas tarp pavarų. Fjdpfx Acoxc H Dfsuepn Įrengtas išilginiu ir skersiniu padavimu. 2 ašių skaitmeninis indikatorius X ir Z ašyse. Multifix greito keitimo įrankio laikiklis.

Peržiūrėti detales

mažas skelbimas

Centrinės tekinimo staklės EMCO EMCOMAT-17D

Wormerveer

1 285 km

Centrinės tekinimo staklės
EMCOEMCOMAT-17D

18 500 €

fiksuota kaina neįskaitant PVM

Skambinti

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, veleno skylė: 50 mm, EMCO lathe EMCOMAT 17D, former educational use, in excellent condition. Specifications: - Year of manufacture: 2006 - Swing over bed: 340 mm - Swing over cross slide: 190 mm - Distance between centers: 700 mm - Spindle speed: 40–3000 rpm, stepless in 4 ranges - Spindle bore: 50 mm Accessories: - 3-jaw chuck with internal and external jaws - 3-axis digital readout - Electrical diagram - Multifix quick-change tool post with 3 holders - Coolant system - Machine lighting - Live center - Bed stop Fpjdpfx Asu N Dpmocuon - Machine feet

Peržiūrėti detales

mažas skelbimas

Centro tekinimo staklės Emco EMCOMAT-17 D

Ubstadt-Weiher

1 232 km

Centro tekinimo staklės
EmcoEMCOMAT-17 D

14 500 €

Pradinė kaina neįskaitant PVM

Skambinti

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Emcomat 17D Lead and Feed Screw Lathe, 3-Axis Digital Readout by K&C, As New from Training Workshop – Excellent Condition!!! Technical Data: >> Year of manufacture: approx. 2000 / Machine No.: D3F H1 010 >> Center height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges, infinitely variable from 35–3000 rpm >> Quill stroke: 120 mm >> Tailstock taper: MT3 >> Spindle bore: 50 mm Fodpfewvuf Tjx Acuspn >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Required floor space (approx.): Length 1.6 x Depth 0.9 x Height 1.3 meters >> Weight: approx. 730 kg Equipment and Accessories: >> K&C 3-axis digital readout, new, 12 months manufacturer’s warranty with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, 200 tool memory, taper calculation, radius/diameter, quick zeroing, counting direction switching, >> 1 pc. NEW 3-jaw chuck 160 mm, 2 sets of jaws >> Multifix B tool post with 2 holders >> Chip guard >> Coolant system About the Machine: For sale is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is, of course, fully functional. The bed ways are in excellent condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new 3-jaw chuck. You are welcome to inspect the machine under power on-site and see the condition for yourself.

Peržiūrėti detales

Aukcionas

Bayern

1 220 km

Centro tekinimo staklės
EMCOemcoMAT-17D

Informacija

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2019, veikimo valandos: 720 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: D4D194801, sukimosi skersmuo virš skersinio stumduko: 190 mm, veleno skylė: 50 mm, tekinimo skersmuo virš slankiojančio stalo: 340 mm, centro aukštis: 170 mm, veleno greitis (maks.): 3 000 aps./min, The machine has been used for training purposes and has only approx. 720 spindle hours. TECHNICAL DETAILS Distance between centers: 700 mm Center height: 170 mm Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Longitudinal carriage travel: 600 mm Cross slide travel: 220 mm Top slide travel: 110 mm Tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: infinitely variable Number of speed ranges: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric threads: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Between centers: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 720 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Center height above floor level: 1,103 mm Total weight: 755 kg Fpsdpfx Acov Iqm Seuen Power supply: 400 - 440 V EQUIPMENT - 3-axis digital readout - Infinitely variable speed control - Röhm ZS 3-jaw chuck Ø200 - 5 x quick-change tool holders B25/120 - Tool set - Fixed center MK 5 - Turning tool set with parting tool (3 x standard, 1 x parting)

Peržiūrėti detales

mažas skelbimas

Stuttgart

1 223 km

Centro tekinimo staklės
EMCOEMCOMAT 17D

Skambinti

Sąlyga: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, veleno skylė: 50 mm, centro aukštis: 170 mm, bendras ilgis: 1 650 mm, bendras plotis: 1 060 mm, bendras aukštis: 1 635 mm, veleno greitis (maks.): 3 000 aps./min, veleno greitis (min.): 40 aps./min, sukimosi greitis (maks.): 3 000 aps./min, sukimosi greitis (min.): 40 aps./min, bendras svoris: 755 kg, trijų žandikaulių griebtuvo skersmuo: 200 mm, Įranga: sūkių greitis be galo kintamas, New machine immediately available from our Stuttgart warehouse. (Subject to prior sale.) Whether for prototyping, maintenance, or—crucially—vocational training, EMCO’s conventional and cycle-controlled machines bridge the gap, offering utmost precision in a compact footprint and flexibility down to the smallest detail. From optional accessories to managing installation logistics, we are here to provide expert consultation. Highlights of the EMCOMAT 17D: - Main spindle DIN 55029 - Tailstock (adjustable off-center) - Single-tool holder (clamping claw) - Belt drive for feed gearbox - Chuck guard with electrical safety switch - Optional equipment such as coolant system, sliding chip guard doors, etc. Working area: - Travel in X/Y/Z: 220 / – / 710 mm - Distance between centers: 700 mm - Center height: 170 mm Main spindle: - Max. speed: 3,000 rpm - Spindle mount: Size 5 (DIN 55029) - Max. drive power: 5.3 kW Fpsdpfjdq Rb Asx Acuen Tailstock: - Internal taper: MT3 - Quill stroke: 120 mm - Quill internal taper: 50 mm The machine can be inspected in Stuttgart.

Peržiūrėti detales

Aukcionas

Bayern

1 220 km

Centro tekinimo staklės
EMCOemcoMAT-17D

Informacija

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, veikimo valandos: 470 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: D4D210301, sukimosi skersmuo virš skersinio stumduko: 190 mm, veleno skylė: 50 mm, tekinimo skersmuo virš slankiojančio stalo: 340 mm, centro aukštis: 170 mm, veleno greitis (maks.): 3 000 aps./min, The machine was used for training purposes and has only approx. 460 spindle hours. TECHNICAL DETAILS Fpjdpfx Acsv Iqlzjusn Distance between centers: 700 mm Center height: 170 mm Swing diameter over bed: 340 mm Swing diameter over cross slide: 190 mm Travel of longitudinal slide: 600 mm Travel of cross slide: 220 mm Travel of top slide: 110 mm Turning tool section: 20 x 20 mm Main drive motor power: 5.3 kW Main Spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: stepless Number of speed ranges: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed Range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread Cutting Range Metric threads: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible Workpiece Weights Between centers: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 460 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Spindle height above floor: 1,103 mm Total weight: 755 kg Sound pressure level: 79 dB(A) Power supply: 400 - 440 V EQUIPMENT - 3-axis digital readout - Infinitely variable speed control - Röhm ZS Ø200 3-jaw chuck (soft jaws, stepped inside and outside) - 5 x quick-change tool holders B25/120 - Tool kit - Fixed centre MK 5 - Turning tool set (3 x standard, 1 x parting-off)

Peržiūrėti detales

Reklamuokite čia