Elumatec SBZ 140 apdirbimo centras

Elumatec SBZ 140

Būklė: geras (naudotas), Gamybos metai: 2004, mašinos/transporto priemonės numeris: 1400040151, Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, įėjimo srovė: 24 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, CNC apdirbimo centras Elumatec SBZ140 Pagaminimo metai: 2004 Kedpfjyr Axxsx Aauslr Gamintojas: ELUMATEC Įrenginys yra geros techninės būklės. Parduodama dėl naujos mašinos įsigijimo.

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, Įmonė Tekstura d.o.o. parduoda naujas FOM Industry mašinas tik Slovėnijoje. Kedpfexu Uyljx Aaujlr

Gamybos metai: 2014, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1400040685, Special features: - Retrofit to WIN10 – NEW – with 6-month warranty on PC and UPS - WATER-COOLED spindle 9.5 kW S1 - 3-layer machining possible - Thoroughly cleaned and overhauled – EXCELLENT condition Description: - Graphical user interface and graphical service support - A-axis for stepless machining from above – swiveling angle 180° - HSC milling spindle for speeds up to 24,000 rpm - Large machining width - Standard with clamp detection and automatic clamp positioning - 8 tool stations - Complete profile machining with stationary profile bar - Rapid basic positioning of the machining unit (up to 64 m/min) in the X axis Klodpsy Ah Tkefx Aaujr - Robust and low-wear direct drive - Protective hood - Digital axis controllers for all 4 axes with high-resolution measuring system - 4-axis industrial PC control - 2 1/2 D interpolation - 15" TFT color display - Network connection RJ45 10/100 Mbit - Hard disk - Full PC keyboard - Remote maintenance via TCP/IP (requirement: internet access) Technical data: - Max. machining length without end machining: 7,600 mm - Max. machining length with end machining: 7,500 mm (tool-dependent) - Travel distance X axis: 7,700 mm - Travel speed X axis: 65 m/min - Travel distance Y axis: 850 mm - Travel speed Y axis: 60 m/min - Travel distance Z axis: 650 mm - Travel speed Z axis: 60 m/min - Swivel angle A axis freely programmable in increments of 0.1°: 0 - 180° - Positioning accuracy: - X axis: +/- 0.1 mm / 1 m - Y axis: +/- 0.1 mm - Z axis: +/- 0.1 mm - A axis: +/- 0.1° - Max. spindle speed: 24,000 rpm - Max. spindle power: 9.5 kW S1 - Tool holder: HSK F 63 - Max. milling cutter diameter: 80 mm - Max. disc cutter diameter: 200 mm - Compressed air connection: > 7 bar - Voltage: 400 V, 3 phase, 50 Hz - Fuse protection: 35 A - 8 tool stations Included accessories: - Tool setting gauge - 8 pneumatic material clamps - Automatic clamp detection - Dosing spray device - Protective hood - Front light barrier - Left and right protective fence - Central chip extraction - 2 pneumatic material stops - 3-circuit clamping system - Length measurement for profile bar - Barcode scanner with wireless transmission - Special version with light barrier Additional options available upon request: - Programming software (office) eluCad, including 6-month hotline contract - 3D import license for a machine of category "L" - Data import package license for a machine of category "L" - CSV import license for a machine of category "L" - Macros hashing license for a machine of category "L" Other information: The machine will be handed over ready for transport, including transport locks and loading onto a truck. Additionally, we can optionally offer the following services upon request: - Installation and commissioning - Machine instruction - 4/5-axis instruction package for machine and eluCad

Būklė: paruoštas naudoti (naudotas), Parduodamas Elumatec 4 ašių CNC strypų apdirbimo centras. Versija: 7,8 m, eigos kelias X/Y/Z: 7720 mm/845 mm/620 mm, didžiausias apdirbimo ilgis iš galo/ne iš galo: 7720 mm/7600 mm, padėties nustatymo tikslumas: +/-0,1 mm/m, didžiausias veleno greitis: 24 000 aps./min, įrankio laikiklis: HSK-63F, įrankių vietų: 8, spaudimo įtaisai: 8, įrenginio matmenys X/Y/Z: apie 11 250 mm/3400 mm/2950 mm, svoris: apie 7 400 kg, darbo valandos pagal gamybos planavimo sistemą: apie 42 200 h. Įrenginys neturi valandų skaitiklio. Yra dokumentacija. Galima apžiūra vietoje. Ksdpfx Aajy Aafxeuolr

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, The Vertical Machining Centre enables drilling, milling, cutting, and corner-processing operations within the technical capabilities specified in the manual for parts made of plastic, PVC, ABS, methacrylate, polycarbonate, thermoplastics, composites, and aluminium. The vertical work table ensures easy loading and unloading of workpieces, while also limiting the machine's maximum dimensions to the necessary minimum. Tool changes are performed using a 10-position tool magazine located on the side of the machine, allowing for various operations without the need to remove the workpiece from the table. Maximum workpiece dimensions: X = 4200 mm Y = 1600 mm Z = 20 mm Rapid traverse speeds (m/min): X = 30 Y = 30 Z = 15 Milling head units T1 and T2: Spindle power (kW): 3.3 Kedpjmzbr Sofx Aauslr Spindle speed (rpm): up to 18,000 Electric spindle with clamp – ER32 Drilling head unit T3: Spindle motor power (W): 370 Spindle speed (rpm): up to 2,800

Gamybos metai: 2020, veikimo valandos: 1 288 h, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, 4-axis CNC profile machining center For economical and efficient machining of aluminum and thin-walled steel profiles. Standard configuration with air-cooled milling spindle (optionally available with water-cooled spindle). All operations such as milling, drilling, and tapping are carried out on a stationary clamped profile. Stepless machining between -90° and +90° with any available tool. Automatic clamp adjustment with absolute measuring system. The moving tool magazine ensures short tool change times, leading to optimized machining cycles. The magazine can be equipped with eight tools. For double profile and end machining, a maximum of two rotatable angle heads with two different tools each are available (0° – 90° – 180° – 270°) (option). Two separate machining zones for pendulum operation (optional). Area protection is provided by a laser scanner on the operator side for maximum safety and easy machine accessibility. Kljdpfx Aswxmdteauor 4-axis control 18.5" color monitor, USB ports, and network connection Windows-based eluCam operating system SBZ 140 – 7.6 m Max. machining length with end machining: 7,600 mm Max. machining length without end machining: 7,720 mm

Būklė: geras (naudotas), Gamybos metai: 2009, Elumatec SBZ 140 Extended Length: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety hood Light barriers Automatic clamp detection Central lubrication Coolant spray system Chip trolley Conditioning unit Max. spindle speed: 24,000 rpm Tool holder: HSK-63F fitting, 8-position tool changer Max. milling diameter: 80 mm Max. saw diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). It is designed for aluminum and thin-walled steel profiles. 4-axis CNC machining center (X/Y/Z + tilting/rotary A-axis) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis traverse speed: X-axis up to approx. 65 m/min, Y and Z axes up to approx. 60 m/min (depending on configuration) Control: 4-axis CNC system with PC operation, color display, USB & network. Software: eluCam. Automatic material clamps; automatic positioning via locating pins Pendulum/shuttle processing (two working zones) to improve production throughput time. Kljdpfxex E Ahze Aausr In addition to milling and drilling, also tapping, sawing, and profile processing—all with stationary clamped profiles. Note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contract, and we recommend verifying all relevant details. Financial information VAT/Margin: VAT: The price shown is excluding VAT (VAT deductible for businesses).

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Zum Verkauf steht eine komplette Produktionslinie für PVC-Fensterbau der Marke URBAN, bestehend aus: *1. Zwei-Kopf-Schweißmaschine; Marke URBAN, Modell: AKS 5305-FF, Seriennummer: 53372, Baujahr: 2007, voll funktionsfähig; *2. Nutfräsmaschine; Marke URBAN, Modell: WS 103, Seriennummer: 790, Baujahr: 2007, voll funktionsfähig; *3. Doppelgehrungssäge: Marke RAPID, Modell DGS 100, Seriennummer: 004606128, Baujahr: 2010, wird mit Absauggerät mit Filtersäcken verkauft, voll funktionsfähig; *4. MACC Stahltrennsäge, Modell NEW 275, Seriennummer: 88266, Baujahr: 2008, voll funktionsfähig; *5. Pantograph der Marke URBAN, Modell MLA A23 – 100466321S, Seriennummer: 528-0, Baujahr: 2008, voll funktionsfähig; *6. Vertikalfräsmaschine; Marke URBAN, Modell M7CRH-100149891, Seriennummer 559, Baujahr: 2008, voll funktionsfähig; *7. Entgratmaschine mit 2 Fräsaggregaten; Marke URBAN, Modell SV 280, Seriennummer: 29342, Baujahr: 2008, voll funktionsfähig; *8. Stabtrennsäge; Marke URBAN, Modell GLS 102, Seriennummer: 102015, Baujahr: 2010, voll funktionsfähig; Die Produktionskapazität der Linie beträgt 30–50 Einheiten/8h (abhängig von der Anzahl der Bedienpersonen). Die Linie war von 2010 bis 2014 nur sehr wenig und nicht unter voller Auslastung im Einsatz. Einzelmaschinen aus der Linie können auf Anfrage verkauft werden. Nettopreis komplette Linie: 33.500 Euro zzgl. MwSt., verhandelbar, FCA Oradea. Kljdpfx Aajucl Dceusr

Būklė: naudotas, Gamybos metai: 2019, ELUMATEC - SBZ 140 ELUCAM - 2019 - 4 ašys - X/Y/Z eigos: 7400-7600/850/650 mm - A ašis 0-180 laipsnių - Greiti judesiai 60-65 m/min Klodpfx Ajyl Shvoausr - Velenas 24,000 aps./min., 11 kW S1 - ATC 8 pozicijų - 2442 veleno pjovimo valandos - Prijungtas prie elektros - Labai gera būklė

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Įrenginys labai geros būklės. Ilgis 7,6 metro, 2 darbo vietos. Galima suteikti iki 6 mėnesių garantiją. Klsdpfoyia Ezjx Aaujr

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1996, Bendrieji duomenys Įrenginio svoris: 2200 kg Klsdpsx D Dwfofx Aauor Aukštis: 1700 mm Gylis: 1200 mm Matmenys Įrenginio ilgis: 2200 mm Ši 3 ašių Star SR 20 R III staklė pagaminta 1996 m. Didžiausias tekinimo skersmuo – 20 mm, veleno apsukos iki 8 000 aps./min., greito paėmimo greitis 35 m/min. Idealiai tinka preciziškam tekinimui – turi šešias fiksuotas tekinimo įrankių pozicijas ir penkias radialines varomų įrankių stotis. Jei ieškote aukštos kokybės tekinimo galimybių, apsvarstykite mūsų siūlomą Star SR 20 R III įrenginį. Susisiekite dėl daugiau informacijos. Pritaikymo sritys Tekinimas

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1400040164, ruošinio ilgis (maks.): 7 900 mm, veleno greitis (maks.): 21 000 aps./min, Prieš keletą metų veleno variklis buvo visiškai kapitališkai suremontuotas gamykloje ir nuo to laiko naudotas tik apie 100 valandų. TECHNINĖ INFORMACIJA Rušinio ilgis: 7 900 mm Sukimosi greitis: 21 000 aps./min STAKLIŲ DUOMENYS Ksdpfjxy Hciex Aaujlr Pneumatika Slėgis: 8 barų Elektros duomenys Jungties tipas: 3/PEN Įtampa: 400 V Dažnis: 50 Hz Srovė: 24 A

Gamybos metai: 2003, būklė: naudotas, 4-axis machining center with 8-position tool changer for aluminum or PVC profiles Maximum machining length: 6,400 mm Y-axis travel: 850 mm Z-axis travel: 650 mm A-axis swivel angle: 0° - 180° max. Spindle speed: 21,000 rpm Windows operating system Minimum quantity lubrication Workpiece clamp detection and automatic positioning Kledpfx Aeuwq S Deauor Chip conveyor integrated in the bed Swarf extraction Pendulum operation via two light barrier areas Loading is included in the price Weight: approx. 4,500 kg

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Max. carbide saw blade: 500 mm Saw motor drive power: 4 kW Saw motor speed: 2,800 rpm Saw blade cutting speed (500 mm): 4,400 m/min Saw height adjustment: infinitely variable, fully electronic Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 150 mm Feed length, pneumatic: 5–560, 10–1,120 mm Klsdpfjuiy Nyox Aausr Compressed air connection, on-site: 6 bar Weight (saw) approx.: 800 kg Dimensions LxWxH (saw) approx.: 2,900 mm x 1,400 mm x 1,500 mm Required installation space LxW: 2,900 mm x 1,400 mm Additional Description Elumatec SA/ SAS 142 4 kW Retrofit Elumatec SA 142 4 kW Retrofit Fully automatic saw for non-ferrous metals and plastics The machine is in like-new technical and optical condition after completion of the retrofit. The machine is fully refurbished at our facility according to customer requirements. The following points have been renewed, among others: - Conversion to Siemens S7 PLC control system - Conversion to Siemens HMI operator panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve manifolds - Maintenance of minimum quantity lubrication system - Replacement of common wear parts - Overhaul of the enclosure Warranty: Unless otherwise agreed, we offer a 6-month warranty on all parts overhauled or replaced by us. Labor and wear parts are excluded from the warranty. Options: - Extension of the sawing range for flat material, 90° max.: 300 x 120 mm - Chip breaker extension (for high-quality cut surfaces without drag marks) - Servo-controlled material feed - Servo-controlled saw blade feed - Heavy-duty clamping device for the gripper feed - Delivery and installation at your facility - Training of your personnel

Gamybos metai: 2016, veikimo valandos: 10 900 h, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Įrenginys yra labai geros būklės ir visiškai veikiantis. Mums jo nebereikia, todėl parduodame. Reguliariai prižiūrėtas. Išmontavimas ir pakrovimas į sunkvežimį įskaičiuoti į kainą. Kljdpfswwtylsx Aauor Papildoma informacija: 4 ašių profilių apdirbimo centras Sukurtas lankstiam ir efektyviam aliuminio apdirbimui Autonominis spaustuvų pozicionavimas Maks. darbo ilgis: 7 600 mm 8 pneumatiniai spaustuvai Įrankių keitiklis 8 įrankiams Veleno darbo laikas: 5100 val. Papildomos techninės specifikacijos – pagal užklausą.