Pakabukas-juda,

Durchmesser110 mm 312/6

Būklė: naudotas, Gamybos metai: 2006, X-axis travel: 1,000 mm Y-axis travel: 1,000 mm Z-axis travel: 1,200 mm C-axis: 360° x 0.001° increments A-axis: ° Control: SINUMERIK 840D Powerline SIEMENS Table size: 900 x 700 mm Dcjdpfxjw E Nnne Aahjd Milling spindle taper: HSK-A100 Spindle speeds - stepless: 12,000 rpm Tool magazine: Chain magazine for 180 tools Total power requirement: 85 kW Machine weight: approx. 20.5 t Space requirement: approx. 6.5 x 6.1 x 3.5 m 5-axis machining center with horizontal milling spindle arrangement Control: SIEMENS SINUMERIK 840D Powerline electronic handwheel NC rotary tilting table Rotoclear window Probe prepared Blum laser tool measurement Vibration sensor Tool taper cleaning 4th operating mode High-pressure coolant system with 2 pumps, 40 bar and 80 bar Chip conveyor Belt filter system Mist and smoke separator Cooling / heating unit

Būklė: naudotas, Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, gerklės gylis: 1 250 mm, Radial Drilling Machine Manufacturer: Breda Model: R 55-1250 Year of manufacture: 1994 Technical Details Manufacturer: BREDA Model: R 55-1250 Arm Length: 1250 mm Drilling capacity in steel: 55 mm Drilling capacity in cast iron: 70 mm Thread cutting in steel: M 50 Thread cutting in cast iron: M 65 Spindle taper: MT 5 Arm reach: 1250 mm Traverse of spindle box: 930 mm Minimum/maximum distance from base plate: 536 – 1375 mm Vertical travel of arm: 705 mm Spindle stroke: 310 mm Number of spindle speeds: 12 Spindle speeds: 30 - 1200 rpm Number of feeds: 8 Feeds: 0.06 – 1.0 mm/rev Base plate: 2070 x 910 mm Base plate clamping surface: 1325 x 910 mm Motor power: 4.4 kW – 380 V Dimensions (L x W x H): 2.1 x 1.0 x 2.5 m Weight: 3 t Accessories Drilling table 750 x 600 x 550 mm Coolant system Hydraulic clamping All information subject to change without notice. Djdpfx Ajv Rpf Soahjcd A demonstration is possible at any time in our showroom.

Būklė: labai geros būklės (naudotas), various steady rests Dcedpfjd E Tb Esx Aahjd

Būklė: labai geros būklės (naudotas), Steady rest made of steel Center height: 650 mm Clamping diameter: 650 mm Height from base: 1190 mm The total height and center height can optionally be reduced by 100 mm each by removing an intermediate plate. For further details, see image. Djdpfxegzhbzj Aahocd

Būklė: naudotas, Gamybos metai: 1992, Grinding length: 800 mm Grinding width: 500 mm Workpiece height: 400 mm Dsdpswgnz Aofx Aahecd Table size: 800 x 400 mm Table speed: 1 - 25 m/min Automatic cross feed: 0 - 60 mm/stroke Grinding wheel dimensions: 400 x 100 x 127 mm Grinding spindle speed: 1400/2800 rpm Total power requirement: 10 kW Voltage: 380 V Machine weight approx. 6 t The machine comes equipped with coolant system, automatic vertical feed, wheel dresser, and wheel mounts.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 16 193 h, X ašies eiga: 850 mm, Y ašies eiga: 700 mm, Z ašies eigos atstumas: 500 mm, įrankių magazino lizdų skaičius: 38, sukimosi greitis (maks.): 15 000 aps./min, A ašies pasukimo kampas (min.): −139 °, A ašies pasukimo kampas (maks.): 91 °, C ašies pasukimo kampas (maks.): 360 °, A similar machine was recently successfully auctioned! Submitting a bid obligates you to collect the machine by 31.03.2025! TECHNICAL DETAILS Travel ranges X-axis: 850 mm Travel ranges Y-axis: 700 mm Travel ranges Z-axis: 500 mm Control type: Heidenhain TNC 640 Rapid traverses linear X-Y-Z: 35-35-35 m/min Linear acceleration X-Y-Z: 6 m/s² Feed force linear X-Y-Z: 7,000 N Max. throat width: 625 mm Workpiece dimensions Max. diameter: Ø 650 mm Max. height: 500 mm Interference circle (A-axis) in 0° position: Ø 885 mm Spindle data Speed: 15,000 rpm Power/Torque: 20% duty cycle, 20 kW / 173 Nm Tool holder: SK 40 Tool interface Type: SK 40 Magazine slots: 38 Chip-to-chip time: approx. 6 s Max. tool length: 300 mm Tool diameter with adjacent slots occupied: Ø 80 mm Tool diameter without adjacent slots occupied: Ø 125 mm Max. tool weight: 8 kg Max. magazine load: 152 kg Swivel rotary table Clamping area: Ø 650 x 540 mm Centering bore: Ø 32 H7 Swivel range: +91° / -139° C-axis drive type: worm gear A-axis swivel speed: 25 rpm C-axis rotary speed: 30 rpm Table load with single-sided drive: 600 kg Accuracy as per ISO 230-2 Deviation (A in X-Y-Z axis): ≤ 0.006 mm Cooling system (IKZ) Standard tank capacity: 122 l Coolant tank capacity: max. 570 l at 40 bar Max. pressure: 40 bar Flow rate: 11/27 l/min Power supply (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filters: safety filter, paper belt filter Operating pressure Hydraulic pressure: 120 bar Compressed air: 6 bar Lubrication system: minimum quantity grease lubrication MACHINE DETAILS Control operating hours: 24,403 h Machine operating hours: 23,349 h Program run: 16,193 h Spindle time: 13,916 h Dedpfx Aev Hmdqeahjcd Weight: approx. 9.5 t Power supply Voltage: 400 V / 50/60 Hz Power consumption: up to 30 kVA EQUIPMENT - BLUM touch probe - BLUM tool laser measurement - Extendable chip drawer - Swivel rotary table - Chip rinsing gun - Emulsion mist extractor - Scraper belt conveyor - Air blow-off unit - Air through spindle center - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Electrical thermal compensation by Heidenhain - Electrical hand control module by Heidenhain.

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, Steady rest for TR-115 Poręba lathe, range 150-450 mm - NEW! Also available for Poręba lathes of types TR, TPK, TCG, etc. Supports, lathe tool holders, toolposts and other spare parts for Polish POREBA lathes are in stock at our central Poland warehouse. Worldwide shipping available. Dodpfx Asur Ig Hoahocd

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1989, šlifavimo ilgis: 1 500 mm, šlifavimo plotis: 900 mm, šlifavimo disko skersmuo: 500 mm, stalo ilgis: 1 500 mm, stalo plotis: 740 mm, šlifavimo ratuko plotis: 100 mm, CNC Surface Grinding Machine Machine type: Elb Schliff SWDE 012 NPC-K Year of manufacture: 1989 TECHNICAL DATA: Max. grinding length: 1,500 mm Max. grinding width: 900 mm Max. working height with new grinding wheel: 800 mm Max. working height with worn wheel: 880 mm Max. workpiece weight: 1,000 kg static Max. table load: 1,500 kg/m dynamic Grinding wheel diameter: 500 mm Grinding wheel width: 100 mm Table size: 1,500 x 740 mm Equipment features: Paper band filter Wet grinding device EL. straight-line dressing unit Cross clamping Grinding spindle mounting: Taper 75 Dcjdpfxowzlkqe Aahed Magnetic chuck: 1,500 x 900 mm No rotary table

Būklė: naudotas, Gamybos metai: 1970, Drilling capacity in steel (diameter): 32 mm Arm reach: 1,000 mm Dcodpjt H Smyofx Aahod Maximum workpiece height: 1,400 mm Total power requirement: 6 kW Machine weight: approx. 3,700 kg Space required: approx. m W E B O Radial Drilling Machine Model: BR 32 V Year of manufacture: approx. 1970 Serial No. Drilling capacity in cast iron/steel (solid): max. 40 / 32 mm Reaming capacity with 50% pre-drilled: 60 / 80 mm Arm reach: approx. 1,000 mm Spindle taper: MT 4 Quill stroke: 350 mm Spindle speeds, 3 stages/stepless: 60 – 1,850 rpm Base plate: 1,200 x 930 mm Installation height under spindle: 200 – 1,400 mm Swivel radius: 360° Vertical adjustment of arm: 980 mm Horizontal travel of drilling slide: 1,640 mm 9 feed rates: 0.06 – 1.0 mm/rev Spindle drive: approx. 3 / 4 kW Total drive: 6 kW – 380 V – 50 Hz Weight: approx. 3.7 t Accessories / Special features: • Manual mechanical clamping of arm and spindle head via hand lever • Automatic feed with depth stop via Vernier scale • Stepless speed adjustment within three gearbox stages and 2 motor speeds, adjustable via hand lever • Right and left-hand rotation • Electro-motorised vertical adjustment of arm via cross switch • Ampere meter for drilling motor • Coolant system with integrated pump • Fixed work table approx. 800 x 600 x 600 mm high, vise, etc. Ideal machine for steel construction, toolmaking, and mechanical engineering! Condition: Used, but in good to very good condition – ready for demonstration Delivery: ex stock, as inspected Payment: net – upon receipt of invoice

Būklė: naudotas, mašinos/transporto priemonės numeris: 6742, Graduation in degrees, minutes, and seconds Dedpfxsbzfqdo Aahecd Diameter: 400 mm Dimensions: L 500 x W 650 x H 160 mm Weight: 70 kg