Veido plokštė 28038

Durchmesser 510 mm KKG 8

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, bendras svoris: 1 195 kg, tūrio srautas: 7,25 m³/val, darbinis slėgis: 13 juosta, įėjimo įtampa: 400 V, ATLAS COPCO GA 37 VSD ff Screw Compressor Variable speed drive (inverter controlled) Equipped with a refrigerant dryer 37 kW motor Output: 7.25 m³/min Pressure: 13 bar Operating hours: 13,200 h Gsdpfjt Hdh Nox Abmskf The compressor is fully operational

Sąlyga: naudotas, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture: approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feeds: longitudinal and facing Chuck flange: Short taper DIN 55022 size 4 Tailstock taper: MT 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gearbox ranges - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change toolholder with 1 changeable cassette - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 centre point for collet chuck - Emergency stop - Hinged chuck guard - Splash guard panel - Machine lamp - Electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Godpsrtd Uwefx Abmjkf Space requirement L x W x H: 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Gamybos metai: 1990, Sąlyga: geras (naudotas), CNC 4th Axis Gksdpfjgabu Uox Abmef Manufacturer: NIKKEN Model: CNC-200, Year: 1990 Including tailstock and base plate.

Sąlyga: naujas, Load capacity: 15,000 kg Length: 10,000 mm Width: 2,450 mm Height: 625 mm Rear axle: steerable Front axle: steerable Tyre dimensions: 425 x 260 mm Machine weight approx. 2.9 t Required space approx. 11.7 x 2.5 x 0.625 m Gkodpfx Abjfrzvljmsf Heavy-duty trailer equipped with: - Double turntable steering - Small turning radius - Tip-over protection thanks to steering angle limiter - Robust design, low maintenance - Interchangeable drawbar, length 1,320 mm - Impregnated wooden platform - Standard paint finish varies. Custom RAL colour available on request. Other load capacities and dimensions available upon request. Please contact us.

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, max. pressing length approx. 2,750 mm max. gluing width approx. 1,750 mm 10 freely movable support arms, each equipped with a hydraulic pressing cylinder and one counterpressure element adjustable by grid Pressing cylinders on support arms freely positionable Support arms suspended at the top, allowing fast transfer from one side to the other Dimensions of pressure pad/cylinder: 115 x 50 mm Dimensions of counterpressure pad: 115 x 50 mm Cylinder stroke max. approx. 30 mm Gluing rack movable on rollers Overall dimensions (LxWxH): Gjdpeww Awgefx Abmjkf 3.1 x 1.0 x 2.25 m Pressing cylinders have been pressure-tested in stock.

Sąlyga: labai geros būklės (naudotas), Multiple 150 m³ underground steel storage tanks (fire water tanks) Capacity: 150,000 litres Diameter: approx. 3,000 mm Length: approx. 22,500 mm Gedpsfnh Tgsfx Abmskf Weight: approx. 28,000 kg The tanks are converted into underground firefighting water tanks in accordance with DIN 14230: The tank is equipped with a fire water suction connection according to DIN 14244, featuring an installed firefighting coupling / permanent coupling A as per DIN 14319, version Form B, without dip tube. Additionally, the tank includes a vent flange connection (DN 100) with cap, total length approx. 1,300 mm, suitable for 800 mm earth coverage and 500 mm above ground. - The tank is emptied, cleaned, and externally coated with bitumen paint by us at the factory - On request, we can provide the tank with a full internal bitumen-based lining (for corrosion protection) or an internal epoxy resin coating Cost-effective delivery with our own truck is possible. Simply provide us with the delivery location and you will promptly receive the exact shipping costs. Inspection is possible at any time by prior appointment. Should you need further information, please call us or send an email to b.barth (a) barth-tank.de

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 7979, Table diameter: 400 mm Table with 8 T-slots: 12 mm Overall height: 175 mm Gjdeb Ez R Uopfx Abmjkf Required space: 600 x 450 x 175 mm Weight: approx. 100 kg

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1984, Mašina modernizuota 2015 m. Maks. gręžimo pajėgumas: 20 mm Įrankio kūgis: 2 MK Sukimosi greitis: 355/710/1400/2800 aps./min Veleno eiga: 100 mm Veleno išsikišimas: 210 mm Veleno galvutės poslinkis: 250 mm Maks. atstumas velenas-stalas: 445 mm Stalo paviršius: 340x280 mm Prisijungimo galia: 1,1 kW Svoris: 0,165 t Gkodpfx Asgqukfjbmef Reikalinga vieta IxPxA: 0,6 x 0,5 x 1,3 m

Gamybos metai: 1989, Sąlyga: naudotas, Cutting diameter: 420 mm Saw band length: 6300 mm Table height: 700 mm Drive power: 5.5 kW Cutting speed: 20–130 m/min Minimum cut-off length: 6 mm Gkjdporc I H Eefx Abmsf Minimum diameter: 10 mm Machine weight: approx. 2.9 t Space requirement: approx. 2.4 × 3.3 × 2.4 m Fully automatic band saw, hydraulic saw blade tension, infinitely variable cutting feed, hydraulic material feed, automatic feed with horizontal vice. Clamping force: approx. 400–2000 daN Coolant supply via three coolant nozzles, approx. 135 l, approx. 30 l/min.

Sąlyga: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, aušinimo tipas: vanduo, FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius wire feeder case VR 4000 ➤ Fronius standard intermediate hose package from 1.5 m ➤ Fronius trolley ➤ Fronius hose package ➤ Ground cable 3-4 m ➤ Pressure regulator This unit can weld almost all materials, including aluminium, steel, and stainless steel (V2A). It is equipped with filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and applications: Gkjdpfx Abswbh Ifsmjf This TPS series can easily be connected to a robot. For this, you only need an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and load characteristic curves to further expand the functions of the TPS device. ----- IMMEDIATELY AVAILABLE PROPER INVOICE Viewing possible in Austria, 1230 Vienna! ✔ Insured pallet shipping available! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? For your information, we purchase used devices in excellent condition, disassemble them, check everything thoroughly, replace any worn parts if necessary, and only after a successful test weld do we approve them for sale. "All" devices are clean and have neither burn holes in the displays nor numerous burn holes or dents scattered on the device! When you buy from us, you get an item that is worth seeing and does not look completely worn out! ►►►Do we receive an invoice with the purchase? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and the requirements for intra-community supply within the EU are met, we can issue a net invoice. ►►►What payment options are available? Prepayment or cash on personal collection ►►►Is insured shipping possible? Yes, we are happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately have no margin to offer a warranty. However, the devices can be tested and paid for in cash on site. ►►►Why buy from us? We are professionals for this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these devices and only sell what we understand.