CNC tekinimo ir frezavimo centras

DOOSAN PUMA 2600Y

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. Kedpfx Aoxmhdnebrjwu Both powerful spindles offer a 66 mm bar passage; two turrets each have 12/24 tool stations with driven tools rated at 14 kW and 12,000 rpm. Y-axis available on both upper and lower turrets. The machine is fitted with a 35-bar high-pressure coolant system including a filtration unit and an additional tank. For further information regarding this lathe, please refer to the attached brochure or contact us directly. Equipment: - LPS for left spindle - Reducing tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 cooling unit for coolant – 8000W - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable, automatic parts catcher (pneumatic) - Part remover equipped with a pneumatic gripper for taking out finished workpieces - Pneumatic ejector for sub-spindle with 100 mm adjustable stroke; end position monitored by sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction system, connection flange Ø100 The machine is fitted with a chip conveyor, coolant unit, and tooling package. The machine can be inspected under power and is available immediately. Only operated in single-shift mode. Further information available upon request.

Sąlyga: naudotas, Gamybos metai: 2013, valdiklių gamintojas: Siemens, valdiklio modelis: 840Dsl, Description: Main Spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop nova Kombi Axzug size 65 Counter Spindle: Technology: Motor spindle Speed: 7,000 rpm Power (max.): 22 kW Torque (max.): 130 Nm Workpiece clamping: 3-jaw chuck, SMW Autoblok KNCS-N-225-66 Ejector: Pneumatic Z-axis travel: 750 mm Tool Turret I (X/Y/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool speed: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Y/Z: 270/100/750 mm Rapid traverse in X/Y/Z: 24/10/30 m/min Tool Turret II (X/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool speed: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Z: 205/750 mm Rapid traverse in X/Z: 24/30 m/min Equipment/Accessories: Kedpew Tg Adjfx Abrowu Chip management: Chip conveyor Coolant management: High-pressure coolant pumps, 14 bar Raw material feed: Short bar loader, EMCO LM 1200 Finished parts removal: Workpiece pick-off device (pneumatic) with conveyor belt Oil mist extraction: Mechanical separator, Absolent make Tool holders: Various fixed and driven holders Additional equipment: Spindle chiller unit

Sąlyga: naudotas, Gamybos metai: 2019, Swing diameter 400 mm Turning length 584 mm Swing over bed 750 mm Control Siemens 828 D Shop Turn Spindle bore 81 mm Spindle speed: 3500 rpm Spindle drive 18.5/22 kW Kodpfxjww Naze Abrowu Spindle torque 410 Nm Number of tools in turret 1: 12 BMT 65 of which driven: 12 BMT 65 Speed of driven tools 5000 rpm Milling spindle drive: MK 5 kW y-axis +/- 60 mm Rapid traverse 30/30/10 m/min Tailstock MK 5 Dimensions (L x W x H) 4.6 x 1.9 x 2.1 m Machine weight approx. 6.65 t Flat-bed CNC lathe with driven tools and Y-axis - 3-jaw chuck Kitagawa Ø 250 mm - Chip conveyor - Parts catcher with box in the door - Signal lamp - 2 + 2 driven tool holders - Various fixed tool holders - Flat guideway - Tool measuring arm - Programmable tailstock - 23 bar coolant system - Enlarged coolant tank 225 l - Double cartridge filter - Coolant spray gun - Dual-pressure clamping

Gamybos metai: 1985, Sąlyga: naudotas, Workpiece diameter: 25–90 mm Thread length: 3,000 mm Thread pitch: 2–16 mm Total power requirement: 25 kW Machine weight approx.: 10.5 t Space requirement approx.: m O F F E R We can offer you the following, subject to prior sale and errors excepted, ex stock without obligation. WALDRICH COBURG Whirling machine / peeling machine for the production of threads, worms, ball screws or similar components Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Thread diameter: 25 – 90 mm Max. thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Pitch angle max. up to Ø 55 mm: 15° Pitch angle max. descending up to Ø 90 mm: 8° Whirling head speed, stepless: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore diameter of clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive approx.: 25 kW – 380 V – 50 Hz Weight: approx. 10,500 kg Accessories / special features: • Robust whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests, integrated with prism guides. Manual thread depth adjustment and optical pitch angle setting on the support. Kjdpfxotzdyze Abrjwu • Powered tool head, normally equipped with 4 tools: 2 roughing tools, 1 flank tool, 1 deburring tool. • Workpiece speeds and pitch feed are finely adjustable using change gears. Separate rapid traverse for resetting the whirling slide. • Simple indexing unit for whirling multi-start threads. • Additional setup for whirling threads longer than the centre distance with intermediate support. • For correcting lead-screw errors, thermal expansion of the workpiece, or errors during additional setups, the machine is equipped with a compensation device. This enables both an electronically programmed compensation of the lead-screw as well as workpiece-specific linear compensation using a wedge system. • Motorized tailstock adjustment with automatic stop by contact pressure sensor. • Comprehensive accessories including cutting tools, toolholders, collets, accessory parts, setting devices, gauges, and operating tools. • Central lubrication, coolant system, separate control cabinet, operating manuals. The machine is suitable for roughing and finishing of single and multi-start right- and left-hand threads, worms, ball screws or similar workpieces!

Sąlyga: naujas, Gamybos metai: 2025, veikimo valandos: 671 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 550 mm, Z ašies eigos atstumas: 450 mm, greitas poslinkis X ašimi: 35 m/min, greitas poslinkis Y ašis: 35 m/min, greitasis eiga Z ašyje: 35 m/min, valdiklių gamintojas: Heidenhain, valdiklio modelis: Heidenhain TNC7, ruošinio svoris (maks.): 1 100 kg, stalo plotis: 800 mm, stalo ilgis: 616 mm, sukimosi greitis (min.): 20 aps./min, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, Heidenhain TNC7 Velenas HSK-A63 16000 min-1 Kwjdpfx Aboyf E Atereu 30 įrankių vietų Standus tvirtinimo stalas 800x616 Vidinis aušinimo skysčio tiekimas 40 barų su popierinės juostos filtru Grandininis transporterio grandiklis Rankinis ratukas BLUM LC53-Digilog įrankio lūžio / matavimo sistema Matavimo zondas BLUM TC Mašinos veikimo laikas: 671 h Veleno veikimo laikas: 61 h Mašina apie 6 mėnesių senumo. Parduodama pagal kliento užsakymą. Apžiūra įmanoma iš anksto susitarus.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2013, veikimo valandos: 8 185 h, X ašies eiga: 600 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 500 mm, valdiklių gamintojas: HEIDENHAIN, valdiklio modelis: iTNC 530, veleno greitis (maks.): 18 000 aps./min, ašių skaičius: 5, Šis 5 ašių DMG DMU 60 evo Linear buvo pagamintas 2013 m., jo eigos diapazonas yra 600/500/500/500 mm, suklio greitis iki 18 000 apsukų per minutę, o įrankių dėtuvė turi 60 pozicijų. Jame yra "Heidenhain iTNC 530" valdymas, vidinis 40 barų aušinimo skystis ir juostinis drožlių transporteris. Idealiai tinka sudėtingoms apdirbimo užduotims atlikti. Susisiekite su mumis ir gaukite daugiau informacijos apie šias stakles. • Įrankių žurnalas: 60 pozicijų • Greita eiga: 80 m/min • Dinaminis paketas • Vidinis aušinimo skystis: 40 barų • Besisukantis stebėjimo langelis • Lovio plovimo sistema su plovimo pistoletu • Darbo valandos: 14,471 h • Suklio darbo valandos: 8,185 h Papildoma įranga • Juostinis drožlių transporteris • Popieriaus juostinis filtras, 600 litrų Kedpfxjx D Dyao Abrewu • Alyvos ir emulsijos rūko separatorius • "Heidenhain TS 649" jutiklinis zondas • 3D quickSET įrankių rinkinys Technical Specification Taper Size HSK 63

Sąlyga: naudotas, Gamybos metai: 2005, Tekinimo staklės Mazak QTN 200, pagaminimo metai 2005 Mazatrol 640T 210 mm Kitagawa BB 208 griebtuvas Veleno skersmuo 65 mm Tekinimo ilgis 500 mm Tekinimo skersmuo 380 mm Grąžulas Kodpfx Abexgpqperewu Įrankių jutiklis

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machining length: 200 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 8,000 [rpm] - Spindle drive power: 1.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 10 Kwsdpouhazgsfx Abrju - Number of live tool positions: 5 - Driven tool speed: 5,000 [rpm] FRONT TOOL POST - Number of positions: 4 SUB SIDE MACHINING - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 [V] DIMENSIONS AND WEIGHT - Installation space: 2,110 x 1,085 [mm] - Machine height: 1,832 [mm] - Machine weight: 2,200 [kg] MACHINE HOURS - Operating hours: 32,264 [h] EQUIPMENT - Control: Meldas - Driven guide bushing - Parts catcher - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Bar feeder: FMB MINIMAG 20

Sąlyga: naudotas, Gamybos metai: 2008, X ašies eiga: 650 mm, Y ašies eiga: 650 mm, Z ašies eigos atstumas: 680 mm, veleno greitis (maks.): 24 000 aps./min, L.-No. 5.3-745 1 used horizontal machining center Heckert HEC 400D, year 2008 CNC control Sinumerik 840D NC rotary table, B-axis Automatic tool changer for 80 tools Pallet changer, 2 pallets 400 mm x 400 mm Through-spindle coolant device (IKZ) Chip conveyor Coolant unit Technical details: X-axis travel (longitudinal): 650 mm Y-axis travel (vertical): 650 mm Z-axis travel (cross): 680 mm Kwjdpsrairwsfx Abrou B-axis: 360° Spindle taper: HSK 63A Spindle speed range: 24,000 rpm Tool magazine capacity: 80 Machine weight approx.: 13,000 kg Technical data, accessories, and machine description are non-binding.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, 2 ašių CNC tekinimo staklės DMC Korea DL22 Fanuc OiTD su Manual Guide ir USB jungtimi Kwedpfx Aoxyaulebrou Gamybos metai: 2012 8 colių griebtuvas Veleno pratekėjimas: 65 mm Tekinimo ilgis: 400 mm 12 įrankių galvutė Griebtuvė Aušinimo pompos vonelė