CNC tekinimo ir frezavimo centras

DOOSAN Puma 2600SY

Sąlyga: naudotas, Gamybos metai: 2011, - Doosan-Fanuc CNC control - Breuning-Irco ILS RBK 10012 bar feeder - Samchully MH-212 Ø 315 mm 3-jaw chuck - Samchully MH-206 Ø 175 mm 3-jaw chuck - Year of manufacture: 2011 Technical Data Capacity: - Swing diameter over bed: 780 mm - Swing diameter over carriage: 630 mm Lsdouxua Iopfx Aaxeai - Recommended turning diameter: 255 mm - Max. turning diameter: 376 mm - Max. turning length: 760 mm - Bar feed capacity: 76 mm Spindle: - Spindle speed (belt type): 3,500 rpm - Spindle nose: ASA A2#8 - Spindle bearing diameter: 140 mm - Spindle bore diameter: 86 mm - Min. spindle indexing angle (C-axis): 0.001° - Sub-spindle speed (integrated): 6,000 rpm - Sub-spindle nose: ASA A2-5 - Sub-spindle front bearing diameter: 90 mm - Sub-spindle bore diameter: 62 mm - Min. sub-spindle indexing angle (C-axis): 0.001° Turret: - Number of tool stations: 12 - External tool diameter: 25 mm - Boring bar diameter: 50 mm - Indexing time (1st swivel time): 0.15 s - Driven tool spindle speed: 5,000 rpm Feeds: - X-axis: 260 (72+188) mm - Z-axis: 830 mm - Y-axis: 102 (± 51) mm - Rapid traverse X-axis: 30 m/min - Rapid traverse Z-axis: 30 m/min - Rapid traverse Y-axis: 10 m/min Motors: - Main spindle motor: 22 kW - Sub-spindle motor: 7.5 kW - Driven tool spindle: 5.5 kW - Feed motors (X-/Z-/Y-axis): 3.0 / 4.0 / 3.0 kW - Coolant pump: 0.4 kW Electrical Connection: - Power supply: 54.55 kVA Dimensions: - Machine dimensions (WxHxD): 3,600 x 2,163 x 1,863 mm - Machine weight: 6,450 kg Breuning bar feeder: - Max. bar diameter: 5 - 100 mm - Max. bar length: 250 - 1,250 mm - Table area: 650/900 x 1,250 mm - Guide channels: 10 / 20 mm - Motor power: 2.0 kW

Sąlyga: naudotas, Description: Main Spindle: Technology: Belt-driven spindle with gearbox Speed: 1,000 rpm Power: 45 kW Torque: 4,008 Nm Bar Capacity: 205 mm Workpiece Clamping I: 3-jaw chuck, Autogrip AP-230 ø535 mm Workpiece Clamping II: Manual 3-jaw chuck, Chandox SK20 (rear of the spindle head) Tool Turret (X/Y/Z): Technology: 12-station turret Tool Interface: BMT 75 Driven Tools: 3,000 rpm, 7 kW, 83 Nm Travel in X/Y/Z: 340/160/3,250 mm Rapid Traverse in X/Y/Z: 20/7/12 m/min Tailstock: Technology: Programmable quill, dragged tailstock Stroke: 150 mm Taper: MT5 Equipment/Accessories: Chip Management: Chip conveyor Coolant Management: High-pressure coolant pump (IKZ) Tool Measurement: Measuring arm, Renishaw RP3 Oil Mist Extraction: Mechanical separator, manufacturer AR Filtrazioni ARNO 3VF YF Shaft Machining: Manual steady rest, ø150-300 mm Tool Holders: Various fixed and driven holders Laodpfxewt Iwqj Aaxoi Setup Operation: Electronic handwheel Additional Features: Automatic door (pneumatic), transformer, oil skimmer Other Accessories: Various jaws and EWS quick-change adapters

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, CNC tekinimo staklės DOOSAN Puma 2600SY II su Siemens valdikliu; Termosensoriai didžiausio tikslumo užtikrinimui; Y ašis; Priešpriešinis velenas su spaudžiamojo įdėklo griebtuvu; Veleno pralaidumas 80 mm (pagrindinis velenas); Visos ašys su plokščiais bėgiais – tinka ir sunkiam apdirbimui; Drožlių transporteris, įrankio matuoklis, detalių gaudyklė su juosta, aušinimo skysčio pistoletas, ištraukimo sistema; 70 bar aukšto slėgio aušinimo sistema; Įvairūs fiksuoti ir varomi įrankių laikikliai; Lasdpfx Ajxqq Hyjaxoi

Gamybos metai: 2011, veikimo valandos: 23 747 h, Sąlyga: paruoštas naudoti (naudotas), Allgemeine Daten Lodpfjwn N Rbex Aaxeai Maschinengewicht: 5650 kg Steuerung Hersteller: FANUC Modell: 31i Model A Hauptantrieb Spindeldrehzahlbereich: 6000 min⁻¹ Spindelmotorleistung: 11/7,5 kW Revolver Anzahl der Revolver: 2 Anzahl der Werkzeugplätze pro Revolver: 12 Medien Späneförderer: Ja Zusätzliche Ausstattung Stangenlader TOP AUTOMAZIONI FU 342 Diese 3-achsen NAKAMURA-TOME WT-100 Drehmaschine wurde 2011 gebaut. Sie verfügt über eine CNC-Steuerung FANUC 31i Model A, eine Drehlänge von 503 mm und einen maximalen Drehdurchmesser von 190 mm. Die Maschine ist mit zwei angetriebenen Revolvern mit je 12 Werkzeugstationen, einer Stangendurchlasskapazität von 42 mm sowie einem Stangenlader TOP AUTOMAZIONI FU 342 ausgestattet. Wenn Sie hochwertige Drehbearbeitung suchen, empfehlen wir Ihnen die NAKAMURA-TOME WT-100, die wir zum Verkauf anbieten. Kontaktieren Sie uns gerne für weitere Informationen. Anwendungsbereiche Drehen

Sąlyga: geras (naudotas), Gamybos metai: 2007, Ranka parodytos dalys nepridedamos. Lsdpfx Asvm Hgrjaxeai

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2000, Funkcionalumas: visiškai funkcionalus, GEBRAUCHTE Taiwan Takisawa EX-108 Hochleistungs-CNC-Drehmaschine mit 2 Achsen. Seriennummer: CA11E80453, Baujahr 2000. HINWEIS: Dies ist ein 2-Achsen-Modell EX108, KEIN 3-Achsen-Modell EX308. • Schwere Schrägbettkonstruktion aus Gusseisen • Fanuc 21iT CNC-Steuerung • 4-fach Schwerlast-Linearführungen • Hochgeschwindigkeits-Servorevolver • Werkzeugmesseinrichtung • 8" 3-Backen-Hohlspannzylinder mit hydraulischem Futter • Stückzähler • Werkzeughalter inklusive Max. Umlaufdurchmesser über Bett: 400 mm Max. Umlaufdurchmesser über Support: 320 mm Spitzenweite: 645 mm Standard-Drehdurchmesser: 216 mm Max. Drehdurchmesser: 320 mm Max. Drehlänge: 530 mm Stangendurchlass: 52 mm X-Achsen-Verfahrweg: 180 mm Z-Achsen-Verfahrweg: 530 mm Spindeldrehzahl: 60–4000 U/min Spindelaufnahme: A2–6 Lsdpot E Hvgjfx Aaxoai Spindelbohrung: 63 mm Revolverkopf: 12-fach Reitstock-Verfahrweg: 435 mm Reitstockpinolenhub: 100 mm Reitstockpinole, Konus: MK 5 Eilgang (X & Z): 20 & 24 m/min Rücklaufvorschub (X & Z): 0–1260 mm/min Spindelmotor: 7,5 / 11 kW Elektrik: 415 V, 3 Phasen, 50 Hz Aufstellfläche: 2240 mm x 1645 mm Maschinengewicht: 4300 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, veikimo valandos: 1 730 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 760 mm, sukimosi skersmuo virš skersinio stumduko: 780 mm, tekėjimo skersmuo: 376 mm, ašies variklio galia: 22 W, veleno greitis (min.): 20 aps./min, veleno greitis (maks.): 4 000 aps./min, veleno skylė: 82 mm, X ašies eiga: 260 mm, Y ašies eiga: 105 mm, Z ašies eigos atstumas: 830 mm, tvirtinimo skersmuo: 24 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 10 m/min, greitasis eiga Z ašyje: 30 m/min, strypo praėjimas: 80 mm, tvirtinimo įvorės skylė: 80 mm, Strypo skersmuo (maks.): 80 mm, CNC Turning-Milling Center Doosan Puma 2600 SYII with Fanuc i Series Control including Accessories Lajdpfxsxauwbo Aaxsi The machine has been used very little, with approximately 1,730 power-on hours, so it is as good as new and will be available from 01.01.2026. Additional accessories for the Doosan Puma 2600 SY II lathe: - 2 tool holders for external turning tools 25x25 - 1 double tool holder for external turning tools 25x25 - 1 tool holder for face machining 25x25 - 2 tool holders for internal turning tools (boring bars) diameter 50 mm - 1 double tool holder for internal turning tools diameter 32 mm - 1 parting tool holder - 1 double right-hand tool holder for external tool (sub-spindle) - 1 double left-hand tool holder for external tool (main spindle) - 4 driven tool holders ER-32 radial (X axis) - 5 driven tool holders ER-32 axial (Z axis) - 1 driven tool holder ER-32 radial (X axis) with internal coolant supply - 1 driven tool holder ER-32 axial (Z axis) with internal coolant supply - 1 three-jaw chuck for main spindle with 1 set of hardened jaws + 2 sets of soft jaws - 1 three-jaw chuck for sub-spindle with 1 set of hardened jaws + 2 sets of soft jaws - 1 collet chuck for main spindle + one collet each diameter 50 mm + 30 mm - 1 collet chuck for sub-spindle + one collet each diameter 50 mm + 30 mm - 1 set of reduction sleeves for diameter 50 (10 pieces) - 1 set of reduction sleeves for diameter 32 (7 pieces) - 1 set of adapters for driven tool holders (ER 32 collet, Weldon, milling arbor) - Flushing device with emulsion on main spindle for automatic cleaning of chuck jaws - Device for automatic cleaning of chuck jaws with compressed air - Additional high-pressure pump for internal coolant supply (for drilling with indexable insert drill) - Function for automatic machine shutdown (the machine also switches off the main switch, thus disconnecting the power supply) - Connection for automatic bar feeder magazine Iemca

Sąlyga: naudotas, TECHNICAL DATA Laedpfx Aswcg Tieaxoi - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machining length: 205 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 1° - Number of toolholder blocks: 1 TOOLHOLDER BLOCK 1 - Number of positions: 12 - Number of driven positions: 8 - Driven tool speed: 7,000 rpm FRONT TOOL POST - Number of positions: 7 SUB OPERATION TOOL POST - Number of positions: 8 - Number of driven positions: 8 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 7 kW WEIGHT AND DIMENSIONS - Footprint: 2334 x 1200 mm - Machine height: 1700 mm - Machine weight: 2,600 kg OPERATING HOURS - Power-on hours: 57,342 h - Operating hours: 31,575 h - Spindle hours: 24,829 h ACCESSORIES - Control: Fanuc 31i-B - Driven guide bushing - Chip conveyor - Parts catcher - Parts conveyor - Parts ejector - Coolant tank - Bar feeder: FMB turbo 3-26 - Electrical transformer

Sąlyga: naudotas, Gamybos metai: 2010, Maximum turning diameter: 410 mm Turning length: 1,235 mm Control: IT / Turn Plus Heidenhain Swing diameter over bed: 700 mm Main spindle speed range max.: 4,000 rpm Main spindle drive power: 35 / 45 kW Maximum torque: 770 Nm Spindle nose: 220 h5 Spindle diameter at front bearing: 160 mm Maximum usable bar diameter: 95 / 104 mm C-axis: 0.001° Number of tool positions: 12 stations Number of driven tool stations: 12 stations Speed range - driven tool stations max.: 4,000 rpm Drive power (driven tool stations): 12 kW Maximum torque: 36 Nm Tool holder: VDI 40 DIN 69880 Turret indexing time 30°: 0.4 sec. Y-axis: 120 (+/- 60) mm X-axis: 300 mm Z-axis: 1,300 mm y-axis: +/- 60 mm Tailstock travel: 1,200 mm Tailstock taper: MK 5 Clamping pressure: 1,400 daN Rapid traverse (X / Y / Z): 30 / 22.5 / 30 m/min Total power requirement: 60 kVA Machine weight: approx. 7.7 t Space requirements: approx. 6.0 x 3.5 x 2.5 m CNC turning and milling center GILDEMEISTER - CTX beta 1250 V4 Lsdpfevzhiwjx Aaxjai - Tailstock - Y-axis - Driven tools - Direct measuring system - Bar machining package - Connection for bar feeder / bar loading magazine

Sąlyga: paruoštas naudoti (naudotas), Wheel diameter – max. 150 mm Wheel width 1 – 200 mm Module – max. 4 Module – min. 1 Control Siemens Sinumerik 840 D Table diameter 140 mm Axial adjustment – max. 200 mm Cutter mount ISO 40 Max. cutter diameter 130 mm Max. cutter length 220 mm Infinitely variable cutter speeds 300 – 1200 rpm Lajdevzhg Njpfx Aaxei Max. cutter traverse 170 mm Swiveling cutter head + / – 45° Feed rate 1 – 1500 mm/min Rapid traverse speed 3000 m/min Max. workpiece diameter in magazine: 150 mm Total connected load 50 kW Machine weight approx. 8.5 t Space requirement approx. 4.7 x 3.6 x 2.6 m Used CNC gear hobbing machine make: Pfauter, year of manufacture 1992, completely overhauled in 2013 by SerWeMa, equipped with Siemens Sinumerik 840 D control and workpiece magazine. This is a pre-owned machine, therefore we sell under exclusion of any warranty.