Tekinimo staklės - valdomos pagal ciklą

DMT Kern CD 480

Sąlyga: naudotas, Gamybos metai: 2002, Techniniai duomenys: Sukimosi skersmuo: 475 mm Sukimosi ilgis: 1500 mm Bdjdpexhqqmjfx Admsk Valdymas: HEIDENHAIN MANUAL PLUS 4110 Sukimosi skersmuo virš atramos: 260 mm Sukimosi greitis: 3000 aps./min Revolverinė galva: 12 pozicijų Veleno anga: 78 mm Griebtuvų eiga: 120 mm Staklių svoris apie: 3,1 t Užimama vieta apie: 3,2 x 2 x 1,9 m Ciklinis tekinimo staklės, 12 pozicijų SAUTER revolverinė galva, VDI 30 dydis, Labai daug priedų (žiūrėti nuotraukas) Mechaniškai rodomas eksploatacijos valandų skaičius: apie 4700 h

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, plunksnos brūkšnys: 190 mm, veleno greitis (min.): 41 aps./min, veleno greitis (maks.): 1 800 aps./min, bendras svoris: 1 920 kg, ruošinio svoris (maks.): 17 kg, plieno lakšto storis (maks.): 32 mm, sukimo momentas: 250 Nm, stalo aukštis: 900 mm, Used DONAU quick radial drilling machine type DR 32 - fully overhauled by vaumatec in 2022 - equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 leveling feet to relieve table frame load) Technical Data: Drilling capacity (solid): Steel 60/E335 mm Ø 32 Bsdpern Riqjfx Admedk (with feed rate 0.20 mm/rev): Cast iron 22 mm Ø 45 Tapping: Steel 60/E355 M26 Tapping: Cast iron 22 M35 Tool holder: MT4 Column diameter: mm Ø 195 Distance spindle nose to table: min./max. mm 260/660 Working table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds range I: rpm 41-1800 Feeds: mm/rev 0.1-0; 15-0; 20-0.3 Max. spindle torque: Nm 250 Arm mobility, radial: N 25 Arm mobility, axial: N 25 Clamping force, radial: Nm 3500 Clamping force, axial: N 5500 Feed force: N 7500 Max. allowable mass: kg 17 Max. allowable inertia: kgm 0.002176 Workpiece: Max. table load: kg 1000 Center of gravity: in the center of the working surface

Sąlyga: geras (naudotas), Gamybos metai: 1998, Swing diameter over bed: 475 mm Swing diameter over cross slide: 260 mm Cross slide travel: 260 mm Distance between centers: 1000 / 1500 / 2000 mm Drive power: 22 kW Gear stages: m = manual / e = ch. 2 e Spindle nose: DIN 55026 / DIN 55027 A6 / 6 Spindle diameter at front bearing: 115 mm Spindle bore: 78 / 70 mm Bsdpfx Adswgn Agjmjdk Speed range (constant V): 1 - 3,000 rpm Cross feed range: 1µ - 1,000 mm/rev Longitudinal feed & thread range: 1µ - 2,000 mm/rev Rapid traverse, cross/longitudinal: 5 / 10 m/min Quill diameter: 70 mm Quill stroke: 120 mm Quill taper: 5 MT Field of application: This machine is designed for single-part and small-batch production of both simple and the most complex contours. Features: --> User-friendly Precision Large working area

Sąlyga: geras (naudotas), Gamybos metai: 2009, 1 used CNC lathe Manufacturer: DMT/Kern Model: CD 480 x 3000 Year of manufacture: 2009 Control: Manual Plus 620 Technical specifications: Centre height: 230 mm Bedeu A Ducopfx Admodk Swing diameter over bed: 475 mm Centre distance: 3000 mm Cross travel: 255 mm Spindle head: DIN 55026/6 Spindle bore: 82 mm Connected load: 30 kW Tool holder turret: VDI 40 Equipped with: - Turret - Hinged belt conveyor - Complete documentation available! The machine is ready for operation and can be tested on site!

Gamybos metai: 2023, Sąlyga: naujas, IMMEDIATE AVAILABILITY! Vibratory Finishing Machines with Separator The machines of the VKUE series can be used for surface processing of both metallic and non-metallic workpieces. Bdsdpfon Smbrjx Admsk These machines feature a large screening area, allowing for easy separation of workpieces from the grinding media. Optional Accessories - Pneumatic sound cover - Pneumatic flap control - Frequency control - Dosing pump - Magnetic valve - Basic control panel - Rinse pipe (various types) Images are for reference only. Optional accessories are available at an additional cost.

Sąlyga: naudotas, mašinos/transporto priemonės numeris: 0001210226, Model table size: 236 x 460 mm Working table size: 200 x 500 mm Bsdpebv S Elofx Admjdk Longitudinal working area: 300 mm Transverse working area: 160 mm Spindle speeds: 1,900 – 15,000 rpm Milling ratio: 1 : 1 (105 x 165 mm) / 1 : 5 (44 x 80 mm) Space requirement: 800 x 900 x 1,250 mm Weight: 340 kg

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, veleno skylė: 83 mm, tekėjimo ilgis: 1 000 mm, tekėjimo skersmuo: 570 mm, tekinimo skersmuo virš viršutinio vežimo: 340 mm, quill skersmuo: 80 mm, šilko eigos atstumas: 200 mm, bendras svoris: 3 200 kg, įvorės išorinis skersmuo: 250 mm, Įranga: sūkių greitis be galo kintamas, The machine is in very good condition. Bdsdpfx Adewxw S Iomjk Available immediately! Can be tested under power.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1998, Heidenhain TNC 426 control Bjdpowhrfzjfx Admodk Travel range X/Y/Z: 600/450/450 mm Spindle speed: 10,000 rpm Tool magazine for 30 tools, SK 40 taper

Sąlyga: geras (naudotas), Gamybos metai: 2018, Swing diameter: 600 mm Turning diameter: 310 mm Turning diameter over support: 355 mm Spindle bore: 53 mm Bar capacity: 45 mm Speed range: 6,000 rpm Turning length: 388 mm Travel - Z axis: 400 mm Travel - X axis: 220 mm Turret (positions): 12 Control system: SIEMENS 828D (Touch) C axis: 0.001° Total power requirement: 20 kVA Machine weight: approx. 4.5 t Space requirements approx. L x W x H: 3.7 x 2.0 x 2.0 m Including automation preparation (loading robot interface) Year of manufacture: 11/2017, delivered 2018 - Automatic door - 12-position tool turret, driven, 5,000 rpm - Workpiece catcher - RENISHAW probe, fully automatic swiveling - Tailstock - Chip conveyor - Coolant pump Accessories: Including collet chuck Bedpewgi Hyjfx Admodk Including 2 driven tool holders (radial + axial) Including 9 fixed tool holders Including USB & LAN interface Including manuals

Sąlyga: naudotas, Gamybos metai: 2014, DMC DL 80V CNC Vertical Turning Machine Year of manufacture: 2014 Turning diameter: 800 mm Turning length: 750 mm Spindle: 30 kW, 2000 rpm Bdodpfx Asvr Ecpodmek 12-position turret 21" chuck Fanuc Oi-Td control Machine weight: 9,800 kg Including chip conveyor and standard accessories