DMG apdirbimo centras X ašis: 2500 mm

DMG DMF 250 Linear

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Universalus 5 ašių apdirbimo centras DMG DMF 250 Linear Pagaminimo metai: 2006 Valdymas: Heidenhain iTNC530 Eigos: X 2.500 mm, Y 920 mm, Z 820 mm NC sukama griebtuvas – Hoffmann (A ašis) NC B ašis: -105 ~ 105° (veleno galva) NC C ašis: 360° ATC: 30 įrankių magazinas Veleno greitis: 18.000 aps./min Veleno kūgis: BT40 Hedpfx Asx Nmlljf Ijng Tiesioginis padėties matavimas X, Y ir Z ašyse

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, Mikron / GF HPM 450 U WPC with Pallet Changer About the machine: High-precision 5-axis simultaneous milling machine with 7-position pallet changer (WPC). Excellent condition, comprehensively equipped! Very low spindle hours! Technical Data: -Heidenhain ITNC 530 HSCI -X-axis: 600 mm -Y-axis: 450 mm -Z-axis: 450 mm -B-axis: +45 / -120 ° -C-axis: 360 ° -Spindle speed range: 20,000 rpm -Spindle drive: 23 / 30 kW -Torque: 91 Nm -Tool holder: HSK 63 -Pallet size: 280 x 280 mm -Max. pallet load: 150 kg -Number of tool magazine positions: 60 -Max. tool diameter: 90 (130) mm -Max. tool length: 200 mm -Max. tool weight: 6 kg -Tool change time: 3 sec. -Feed force X-Y-Z: 5 kN Hjdpfx Aox Hx Rhsf Ijng -Rapid traverse X-Y-Z: 22 m/min -Acceleration X-Y-Z: 5 m/s² -Rapid traverse B-axis: 50 rpm -Rapid traverse C-axis: 140 rpm Equipment: -7 pallets, including 6 pallets with clamping devices (see photos) -Electronic handwheel -Infrared measuring probe -Laser tool measuring system -Direct path measuring systems -APS Advanced Process System -ITC Intelligent Thermal Control -rConnect Live Remote Control (1 year) -KinematicsOpt -CT 60 tool magazine -DYNAFIX 7-position pallet changer -SIGMATEC 15 / 900 cbm/h oil mist extraction unit -Tool air blow-off device -Blow air at the spindle slide -Blow air through the spindle center -Internal coolant system 18 – 70 bar -Paper band filter system -Chip conveyor -Spindle oil chiller Installation dimensions (L x W x H): 6,600 x 4,000 x 2,800 mm Weight: approx. 8,600 kg An on-site inspection/test under power is, of course, possible. We are not your average machinery dealer -> Here you get advice from CNC experts! We are happy to offer you transport, installation/moving in, commissioning, as well as operator training with our own technicians. Everything from a single source: We, Baumgärtner CNC GmbH & Co. KG, are a company specializing in: -Service -Maintenance -Overhaul -Automation of DMG machines and other well-known manufacturers. We support you! From machine purchase, through transport and installation, to commissioning and subsequent maintenance or repair work, you can count on us.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 2 000 mm, Y ašies eiga: 1 250 mm, Z ašies eigos atstumas: 650 mm, bendras ilgis: 6 500 mm, stalo ilgis: 2 000 mm, stalo plotis: 1 000 mm, bendras plotis: 3 600 mm, veleno greitis (maks.): 12 000 aps./min, bendras aukštis: 4 000 mm, bendras svoris: 14 000 kg, Įranga: sūkių greitis be galo kintamas, 2024 retrofitted milling machine Hjdpjul Txzefx Af Isng CNC: TNC 530 HEIDENHAIN Distance between columns: 1250 mm Spindle: HSK 63 ELECTROSPINDLE 12,000 rpm Enclosure: INTEGRAL

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1998, x-axis travel: 800 mm y-axis travel: 600 mm z-axis travel: 500 mm O F F E R We are pleased to offer you, subject to prior sale and errors excepted, the following from stock, non-binding: HERMLE 5-Axis Universal Machining Center in gantry design with swivel rotary table Model: C 800 U Year of manufacture: 1998 12648 _____ Hnsdpfx Aex Dndcef Ieg Milling head travel longitudinal X-axis: 800 mm Milling head travel transverse Y-axis: 600 mm Milling head vertical Z-axis: 500 mm NC tilting axis A-axis: -20 / +90 ° NC rotary table C-axis: 360,000 ° Overhang of the vertical spindle max. approx.: 600 mm Installation height under spindle max. approx.: 100 / 600 mm Table size (swing diameter Ø 630 mm): 540 x 540 mm Max. workpiece weight on table approx.: 300 kg Spindle interface: SK 40 Spindle speeds vertical, infinitely variable: 18,000 rpm Feed rates/rapid traverses infinitely variable: 2 – 35,000 mm/min Feed force approx.: 11/16 Nm Spindle drive: 15 kW Total power approx.: 37 kW – 400 V – 50 Hz Weight approx.: 8,000 kg Accessories / Special Features: • Compact, modified gantry design with 3 axes in the milling head for feed rates up to 35 m/min. All drives and guides are outside the working area. • Machine base made of mineral cast with high damping properties, foundation-free installation, high static and dynamic stability. • SIEMENS 5-axis path control type 840 D with graphics and all modern programming options for full 5-axis machining of complex workpieces with electronic handwheel • NC swivel rotary table (C-axis 360,000° / B-axis -20/+90°) Ø 630 mm • Robust vertical head with HERMLE milling spindle up to 18,000 rpm with automatic swivel nozzle block • Tool changer with extended (additional) magazine for up to 87 tools • Coolant system with chip conveyor, oil mist extraction with filter, full enclosure • Extensive accessories including approx. 50 tool holders, operating manuals. Condition: very good – machine under power and ready for demonstration A video of the machine will be available here shortly (please click on the link): C 800 U/4 Delivery: ex stock – immediately available, FCA Metzingen Payment: strictly net – due immediately upon receipt of invoice, prior to delivery of the machine

Sąlyga: naudotas, Gamybos metai: 2007, x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm Control: Sinumerik 840 D Siemens Maximum clearance between columns: 3,000 mm Maximum clearance height: 1,950 mm Maximum distance from spindle center to table: 1,800 mm Distance spindle nose to table: 1,350 / 1,500 mm Type P 8005020/00-4 Main spindle speed range: up to 18,000 rpm Main spindle drive power: 20 kW Max. torque: 48 Nm Tool holder: HSK-A63 DIN 69063 Spindle extension: 450 mm Swiveling B-axis: +110° / -10° Rotating C-axis: +/- 200° Type P 8002320/00-4 Main spindle speed range: 20 - 5,000 rpm Main spindle drive power: 40 kW Max. torque: 1,100 Nm Tool holder: HSK-A100 DIN 69063 Spindle extension: 300 mm Swiveling B-axis: +110° / -10° Rotating C-axis: +/- 200° Table clamping surface: 4,000 x 2,200 mm (2x) Max. table load: 12 / 20 t Height above floor: 700 mm Number of T-slots: 11 + 19 T-slot width: 28H7 mm T-slot spacing: 200 mm Number of tool positions: 327 pcs. Number of tool positions HSK A63: 156 pcs. Number of tool positions HSK A100: 171 pcs. Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 / 500 mm Max. tool weight HSK A63: 5.0 kg Max. tool diameter HSK A100: 315 mm Max. tool length HSK A100: 500 / 800 mm Max. tool weight HSK A100: 40.0 kg Feed rate X: max. 30,000 mm/min Feed rate Y/Z: max. 40,000 mm/min Feed rate B: 3,600 °/min Feed rate C: 2,160 °/min Acceleration X: max. 1.5 m/s² Acceleration Y/Z: max. 3.2 m/s² Hnedpevy Ihdsfx Af Ijg x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm b-axis +110° / -10° c-axis +/- 200° Total connected load: 150 kVA Space requirement approx. 25.0 x 12.0 x 7.0 m 5-Axis Gantry Large Machining Center DROOP + REIN - TFS 22 40 DT D40 P - Two milling heads - approx. 4,000 operating hours - X-axis 10,000 mm (coupled) / 2x 5,000 mm (single table) - 3 simultaneous axes (X, Y, Z) - 2 positioning axes (B, C) - Tools subject to agreement

Sąlyga: naudotas, Gamybos metai: 2015, x eiga: 1.200 mm y eiga: 600 mm z eiga: 675 mm Valdymas: C 620 HSCI FS Hodpfx Asx Ak Hdsf Isng Stalo dydis: 1.220 x 620 mm Įrankių keitiklis: 40 pozicijų Atstumas tarp stalo ir veleno: 735 mm Sūkių dažnis: 10.000 aps/min Veleno variklis: 18 kW Vidinis aušinimas, slėgis: 30 bar -Elektroninis rankenėlė. -Linijiniai matavimo liniuotės. -Lazeriniai matavimo zondai. -Ruošinio matavimo zondo paruošimas. ZONDAS NEĮEINA.

Sąlyga: naudotas, Gamybos metai: 1992, Technical Details: Load capacity: 10 t Span: 21,000 mm Lifting speed: 6.3 m/min Creep (fine lift) speed: 1.0 m/min Rope diameter: 14 mm Connected load: 15.5 kW SINGLE-GIRDER SUSPENSION CRANE Hjdpov N Ib Nefx Af Iong Crane classification according to DIN 15018H2 B3 Crane carriage: Designation RF 400; Type KBF 112 A8/2, travel speed 12.5 / 50.0 m/min, and type KBF 80 A4, travel speed 2.5 m/min. Size of the 16 wheel sets: Ø 200 mm Trolley (main lift): EKDH 525 H20 KV3-4/1 F6; Type KBF 80 A8/2; speed 20.0 / 5.0 m/min; 4 wheel sets: Ø 160 mm Hoisting gear: Type KBH 160 B2/12; lifting height 10,000 mm; with braking and traversing runner; lifting speed (main lift 6.3 m/min and creep lift 1.0 m/min) Single hook size 5.0 Rope Ø 14 mm; rope length 46 m; mechanism classification FEM 1 AM Operation via pendant pushbutton control with DST Special feature: Traversing section with locking mechanism and branch tracks Additional bridge cranes with a 21 meter span are available for sale.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 500 mm, Y ašies eiga: 1 100 mm, Z ašies eigos atstumas: 1 500 mm, greitas poslinkis X ašimi: 40 m/min, greitas poslinkis Y ašis: 40 m/min, greitasis eiga Z ašyje: 40 m/min, sukimosi greitis (maks.): 7 000 aps./min, ašies variklio galia: 34 W, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, Naudota judančio stovo frezavimo staklė su CNC H. TNC-530 valdymu. Hnodpfx Afjxyw Tfj Ieg

Sąlyga: naudotas, Gamybos metai: 1992, Technical details: Load capacity: 5 t Span: 21,000 mm Lifting speed: 8.0 m/min Creeping speed: 0.8 m/min Rope diameter: 14 mm Connected load: 10.2 kW SINGLE-GIRDER SUSPENSION CRANE Crane classification according to DIN 15018 H2 B3 Crane travelling gear: Designation RF 400; Type KBF 100 A8/2, travel speed 12.5 / 50.0 m/min, and type KBF 71 A2, travel speed 2.5 m/min. Wheel diameter Ø 170 mm (16 pieces) Main hoist trolley EKDH 525 H12 KV3-2/1 F10; Type KBV 71 B8/2; speed 20.0 / 5.0 m/min; wheel diameter Ø 125 mm (4 pieces) Hoisting unit: Type KBH 125 B4; lifting height 12,000 mm; with brake and trolley runner; lifting speed (main lift 8.0 m/min, creeping lift 0.8 m/min) Single hook size 2.5 Rope Ø 14 mm; rope length 28.3 m; mechanism group FEM 1 AM Operation via pendant pushbutton control with DST Special feature: Transfer unit with locking mechanism and branch tracks + infrared Hodpfju Nvg Dsx Af Iong Additional bridge cranes with a 21-meter span available for sale.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 2 050 mm, Y ašies eiga: 850 mm, Z ašies eigos atstumas: 750 mm, greitas poslinkis X ašimi: 16 m/min, greitas poslinkis Y ašis: 16 m/min, greitasis eiga Z ašyje: 16 m/min, valdiklio modelis: OKUMA-OSP-HMI, stalo plotis: 850 mm, stalo ilgis: 2 200 mm, stalo apkrova: 2 500 kg, veleno greitis (min.): 50 aps./min, veleno greitis (maks.): 10 000 aps./min, aušinimo skysčio tiekimas: 15 juosta, atstumas nuo stalo centro iki veleno galo: 950 mm, ašies variklio galia: 22 W, veleno nosis: BT 50, ašies skaičius: 36, įrankių magazino lizdų skaičius: 36, įrankio ilgis: 400 mm, įrankio skersmuo: 120 mm, įrankio svoris: 20 g, įėjimo įtampa: 400 V, Įranga: dokumentacija / vadovas, sūkių greitis be galo kintamas, 3-axis vertical machining center with OKUMA-OSP-HMI CNC Hodou Dinkepfx Af Ijng