Universalus apdirbimo centras
DMG MORI DMU 60 eVo

Name: DMG MORI DMU 60 eVo
Brand: DMG MORI
Availability: InStock

Gamybos metai

2013

Sąlyga

Naudotas

Vieta

Sankt Leon-Rot Vokietija

Universalus apdirbimo centras DMG MORI DMU 60 eVo

Rodyti žemėlapį

Duomenys apie mašiną

Įrenginio aprašas:: Universalus apdirbimo centras

Gamintojas:: DMG MORI

Modelis:: DMU 60 eVo

Gamybos metai:: 2013

Sąlyga:: geras (naudotas)

Funkcionalumas:: visiškai funkcionalus

Darbo valandos:: 59 000 h

Kaina ir vieta

Vieta:: Lanzstraße 6, 68789 Sankt Leon-Rot, Deutschland

Skambinti

Pasiūlymo informacija

Sąrašo ID:: A21289707

Naujinta paskutinį kartą:: Data 2026.02.20

Aprašymas

Universal Machining Center DMU 60 eVo

Travel X/Y/Z: 600 / 500 / 500 mm
Rapid traverse X-axis: 80 m/min
Rapid traverse Y-axis: 80 m/min
Rapid traverse Z-axis: 50 m/min
Speed range (standard): 20 – 14,000 rpm
Motor spindle (power): 18.9 / 14 kW (40/100% DC)
Tool holder (standard): SK40 acc. to DIN 69871
NC rotary swivel table: available
Clamping surface (table): 600 × 500 mm
Swivel range B-axis: −5° to +110°
C-axis: 360°
Load capacity: 400 kg
Direct measuring systems: available (direct measuring system / direct position measuring system)
Table cooling: incl. table cooling (mentioned in connection with direct measuring systems)
Spindle speed (option): 20 – 18,000 rpm (for tool holder HSK-A63 acc. to DIN 69893)
Adjustment of working spindle and tool magazine: deviating from the standard
Spindle speed (max., see further data sheet screenshot): 24,000 rpm
Tool magazine (standard): chain magazine, 30 positions, double gripper
Tool magazine (option): tool magazine, 60 positions, chain magazine with double gripper (deviating from standard)
Control (3D control): Heidenhain iTNC 530 HSCI
Operator interface: SmarT.NC
Control panel: DMG ERGOline® Control
Kwsdpfx Abjyl A Dnorju
Screen: 19" display (mentioned under ERGOline Control)
Heat exchanger: heat exchanger for spindle and table
Active cooler: active cooler for control cabinet
Full enclosure: available
Signal lamp: four-colour / 4-colour (also mentioned for automation)
Probe: Infrared probing system, Heidenhain TS 649 DMG
3D quickSET Toolkit preparation: available
3D quickSET software option: included (one per machine)
5-axis machine configurations: only in conjunction with probe option
Preparation for handling system: preparation for PH 150-8 by DMG Automation
Chip conveyor: scraper belt chip conveyor with cleaned slotted screen
Internal coolant supply (ICS): available
Paper band filter: 40 bar / 23 l/min / tank 600 l
Rotating viewing window: incl. rotating viewing window
Purge air: available
Linear measurement systems: available
Bed flushing: available
Flushing gun for chip removal: available
Air blast through spindle centre: selectable via M-function
Compressed air quality: serviced air with low oil content
Safety package for power failure: available
Overvoltage limiter: available
Undervoltage monitoring: with rapid braking control
Operating mode: 4
Process monitoring: in production
Documentation: Documentation-1 German
Screen text: German/English
DMG / MORI SEIKI Messenger (Promotional Offer): connection for first machine (SIE 840D; HDH iTNC530; HDH MillPlus iT)
DMG Netservice – client: “Green Light for your Machine”; installation on external PC
Automation PH 150-8 with handling system and pallet magazine
Automation Design: System in automation design, matched to machine
Rotary pallet storage: with 8-fold pallet mounts
Servo axes: 2 servo axes (X-axis, magazine table)
Z-axis: pneumatic
Gripper: gripper arm/fork
Basic programming: basic system programming
IPC: IPC with touch panel
Job manager: DMG AUTOMATION Jobmanager
Operator guidance: graphical user guidance
Signal lamp: 4-colour
PH 150-8 integration kit: for DMU 50/70, DMU 40/60/80 eVo linear
UPC P chuck: Erowa (UPC P chuck, Erowa)
UPC pallets: 320 × 320 mm, incl. clamping studs and pallet coupling, Erowa

Skelbimas verčiamas automatiškai, todėl jame gali būtų vertimo klaidų.

Tiekėjas

Registruota nuo: 2011

26 Skelbimai internetu

Skambinti

Pateikti užklausą

Pranešimas*

Pavadinimas*

El. paštas:*

Telefonas

Bendrovė

Pašto kodas ir miestasžemė

Esu prekybos agentas

Gaukite pasiūlymus dėl panašių mašinų

Pastaba: Jūsų užklausa bus perduota visiems šios mašinų kategorijos pardavėjams. Dėl to galite gauti labai daug pasiūlymų.

Privatumo pareiškimas

Telefonas & Faksas

+49 6227 ... skelbimai

Šie skelbimai taip pat gali jus sudominti.

Mažas skelbimas

Universalus apdirbimo centras DMG MORI DMU 60 eVo-linear

Aflenz Land

1 035 km

Universalus apdirbimo centras
DMG MORIDMU 60 eVo-linear

Skambinti

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 500 mm, greitas poslinkis X ašimi: 80 m/min, greitas poslinkis Y ašis: 80 m/min, greitasis eiga Z ašyje: 50 m/min, valdiklių gamintojas: Heidenhain, valdiklio modelis: iTNC530, stalo apkrova: 400 kg, veleno greitis (maks.): 24 000 aps./min, veleno veikimo valandos: 15 410 h, įrankių magazino lizdų skaičius: 60, Įranga: sūkių greitis be galo kintamas, Machine Description: - Universal 5-axis milling machine with linear drives on the X and Y axes, 80 m/min rapid traverse - Spindle and machine geometry in excellent condition - Regularly serviced - Last spindle replacement: 09-2023 / New viewing window and Visiport installed in 2025 - Current operating hours: Machine ON: 45,675 h / Spindle ON: 15,410 h - Machine location: Lower Austria (near Vienna) Travel distances: X-axis (longitudinal): 600 mm Y-axis (transverse): 500 mm Z-axis (vertical): 500 mm Clamping table / working area: Integrated NC rotary table: 600 x 500 mm Table load: 400 kg Control system: Heidenhain iTNC530 Spindle: Speed range: 24,000 rpm Tool holder: HSK63 Coolant system and chip disposal: External coolant with 3 nozzles: 4 bar Internal coolant: 40 bar Paper band filter Chip conveyor in scraper belt design Automatic tool changer: Tool holder: HSK63 Capacity: 60 tool positions Kwedpfx Absylunxsrju Dimensions and weight: Machine: Length 2,900 x Width 2,611 x Height 2,865 mm Weight: approx. 9,800 kg Additional equipment and accessories: › Heidenhain TS 649 touch probe › Heidenhain handwheel › Blum laser for tool measurement on the table › Chip flushing pistol › 3D Quick Set › ATC cycle package › Operating mode 4 › Integrated oil mist extraction › Operating instructions / documentation › Linear drive dynamics package 80 m/min incl. active cooler

Peržiūrėti detales

Mažas skelbimas

DMG DMU 60 evo Linear DMG DMU 60 evo Linear

Vokietija

1 266 km

DMG DMU 60 evo Linear
DMGDMU 60 evo Linear

Skambinti

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2013, veikimo valandos: 8 185 h, X ašies eiga: 600 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 500 mm, valdiklių gamintojas: HEIDENHAIN, valdiklio modelis: iTNC 530, veleno greitis (maks.): 18 000 aps./min, ašių skaičius: 5, Šis 5 ašių DMG DMU 60 evo Linear buvo pagamintas 2013 m., jo eigos diapazonas yra 600/500/500/500 mm, suklio greitis iki 18 000 apsukų per minutę, o įrankių dėtuvė turi 60 pozicijų. Jame yra "Heidenhain iTNC 530" valdymas, vidinis 40 barų aušinimo skystis ir juostinis drožlių transporteris. Idealiai tinka sudėtingoms apdirbimo užduotims atlikti. Susisiekite su mumis ir gaukite daugiau informacijos apie šias stakles. • Įrankių žurnalas: 60 pozicijų • Greita eiga: 80 m/min • Dinaminis paketas • Vidinis aušinimo skystis: 40 barų • Besisukantis stebėjimo langelis • Lovio plovimo sistema su plovimo pistoletu • Darbo valandos: 14,471 h • Suklio darbo valandos: 8,185 h Papildoma įranga • Juostinis drožlių transporteris • Popieriaus juostinis filtras, 600 litrų • Alyvos ir emulsijos rūko separatorius • "Heidenhain TS 649" jutiklinis zondas • 3D quickSET įrankių rinkinys Technical Specification Taper Size HSK 63 Kwodpfx Ajx D Dyaebrou

Peržiūrėti detales

Mažas skelbimas

Trittau

890 km

Universalus apdirbimo centras
DMG MORIDMU 60 evo

Skambinti

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 66 600 h, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, We offer you the following: Technical Data: Control system: Heidenhain iTNC 530 HSCI Travel distances: - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Main spindle: - Speed range: 20 – 18,000 rpm NC rotary table: - Clamping surface: 600 x 500 mm - Max. table load: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: Kwedpfexgnz Tox Abrou - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary tilting table including table cooling - BLUM NT laser tool measurement system - Calibration arbor with tool holder - Wireless touch probe, Heidenhain TS 649 - 3D quickSET preparation - Scraper-belt chip conveyor - ICS (internal coolant supply), 40 bar, 600 l tank, incl. rotating sight glass, air purge, linear measuring systems, bed flushing - Rinsing gun - Mechanical oil and emulsion mist separator - Air blast through spindle center - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of zero-point clamping system - Selection and deselection of handling system via switch on the machine control panel - incl. additional rinsing inside the working area - incl. machine preparation for job management - incl. control panel arrangement on the left - Energy supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 – 240 bar, pressure adjustment via proportional valve technology - incl. rotary union extended to 4 channels Power-on hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the images is not included in the scope of delivery. The machine will be available approximately from October/November 2025. The ball screws and linear guides in the X and Z axes have been renewed. Accessories, depicted tools, and clamping devices are only included if specified in the additional information. Technical data and details subject to change and prior sale. Errors excepted!

Peržiūrėti detales

Mažas skelbimas

Eggstätt

1 132 km

Universalus apdirbimo centras
DMG MORIDMU 60 eVo

Skambinti

Sąlyga: naudotas, Gamybos metai: 2012, X ašies eiga: 600 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 500 mm, Travel range: X / Y / Z = 600 / 500 / 500 mm NC rotary table 600 x 500 mm B axis swivel range: -5° to +110° C axis: 360° Load capacity: 400 kg, direct measuring systems including table cooling Dynamic package: Linear drive in X/Y axes Rapid traverse X / Y / Z: 80 m/min Acceleration X / Y / Z: 10 m/s² Active chiller for main spindle, linear drive, and table Control: Siemens 840D SL Operate Spindle: 20 - 24,000 rpm HSK-A63 according to DIN 69893 • Tool magazine: chain-type magazine with 60 stations • Tool length measurement and tool breakage monitoring Blum Z-Nano Kwjdpfxoyc Tths Abrju • Scraper belt chip conveyor with cleaned slotted screen, internal coolant supply (IKZ), paper filter 40 bar, 231 l/min, tank 600 l, including rotating inspection window, linear systems sealing air, bed flushing • Air blast through the spindle center selectable via M-function, conditioned air with low oil content • Electronic handwheel • Spray gun for chip flushing • Extended chip flushing • Laminated safety glass for working area door and side window • Operating mode 4 • High speed settings • Touch probe Blum HSK-A63 • 3D QuickSet preparation • Optional: oil mist extraction system • New spindle at 25,800 spindle hours

Peržiūrėti detales

Mažas skelbimas

CNC tekinimo-frezavimo centras CMZ TTL - 66 - 66 - T1Y - T2Y

Idstein

1 185 km

CNC tekinimo-frezavimo centras
CMZTTL - 66 - 66 - T1Y - T2Y

Skambinti

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. Both powerful spindles offer a 66 mm bar passage; two turrets each have 12/24 tool stations with driven tools rated at 14 kW and 12,000 rpm. Y-axis available on both upper and lower turrets. The machine is fitted with a 35-bar high-pressure coolant system including a filtration unit and an additional tank. For further information regarding this lathe, please refer to the attached brochure or contact us directly. Kwsdpfx Ajxmhdnebrou Equipment: - LPS for left spindle - Reducing tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 cooling unit for coolant – 8000W - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable, automatic parts catcher (pneumatic) - Part remover equipped with a pneumatic gripper for taking out finished workpieces - Pneumatic ejector for sub-spindle with 100 mm adjustable stroke; end position monitored by sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction system, connection flange Ø100 The machine is fitted with a chip conveyor, coolant unit, and tooling package. The machine can be inspected under power and is available immediately. Only operated in single-shift mode. Further information available upon request.

Peržiūrėti detales

Mažas skelbimas

Apdirbimo centras - universalus DMG MORI DMU 60 EVO

Grüsch

1 339 km

Apdirbimo centras - universalus
DMG MORIDMU 60 EVO

Skambinti

Sąlyga: naudotas, Gamybos metai: 2014, x eiga 600 mm y eiga 500 mm z eiga 500 mm Bendra energijos poreikis --- kW Kwodpfxeycxins Abrju Staklių svoris apie 9,6 t Reikalinga erdvė apie --- m DMG MORI DMU 60 EVO (2014) X - 600 mm Y - 500 mm Z - 500 mm Heidenhain iTNC530 su matavimo davikliu TS649 Veleno apsukos: 14 000 aps./min. Įrankių žurnalas 60 vnt. / Įrankių tvirtinimas HSK63 Juostinis filtro įrenginys su vidiniu aušinimu 40 BAR

Peržiūrėti detales

Mažas skelbimas

Kumla

687 km

Universalus apdirbimo centras
DMG MORIDMU 60 eVo

Skambinti

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, bendras svoris: 10 000 kg, PREMIUMLISTNING – DMG MORI DMU 60 eVo (2017) | 5-axlig | TNC 640 | 120 verktyg | Automationsklar | 40 bar Översikt Erbjuds: en högspecificerad DMG MORI DMU 60 eVo 5-axlig fleroperationsmaskin, tillverkad i Tyskland, med kraftfull utrustning för krävande produktion. Maskinen är förberedd för automation, vilket gör den idealisk för obemannad drift samt framtida pall-/robotintegrering. Viktiga egenskaper • Årsmodell: 2017 • Styrsystem: Heidenhain TNC 640 (ERGOline® styrning, 19" skärm) • 5-axlig NC-vridbord (B-axel -5° till +110°, C-axel 360°) • Verktygsmagasin med 120 platser • Höghastighetsspindel upp till 18 000 varv/min, SK40 BIG-PLUS • Automationsklar + utökad M65-interface • Geometriskt inspektionsprotokoll från DMG MORI tillgängligt Konfiguration & Utrustning (som levereras) Styrning / Programvara / Manövrering • Heidenhain TNC 640, ERGOline® styrning, 19" display • Driftläge 4 – processövervakning i produktion • Elektroniskt handratt 5-axligt bord / Mätning • NC-vridbord 600 × 500 mm • B-axel -5° till +110°, C-axel 360° • Max belastning: 400 kg • Direktmätsystem (rotationsaxlar) • Renishaw OMP60 optisk IR-mätprob Spindel / Verktyg / Magasin • Spindelanslutning: SK40 BIG-PLUS 18 000–20 000 varv/min 35 kW (40 % ED) / 25 kW (100 % ED) • Verktygsmagasin: 120 platser (kedjemagasin med dubbelgripare) • Verktygsbrottdetektering TRS2 (beröringsfri detektering; anpassad för små diametrar) Kylvätska / Spånhantering / Inkapsling • Intern kylvätskeförsörjning (IKZ), 40 bar (pappersbandsfiltertank 600 L) • Spåntransportör • Utökad spolning av arbetsområde • Spånspruta • Spindelcentrerad luftrensning (via M-funktion, konditionerad luft med låg oljehalt) • Roterande säkerhetsfönster (roterande inspektionsruta) • Oljedim- och emulsionsavskiljare (mekanisk) • Automationsklar • Utökad M65-interface Kodpfxjygky Ts Abrowu Uppkoppling / Service • DMG MORI Messenger (installationskit för maskinuppkoppling) • DMG MORI Netservice-klient (support för fjärrdiagnostik via extern PC)

Peržiūrėti detales

Mažas skelbimas

CNC tekinimo staklės MAZAK QTN nexus 200

Jasło

625 km

CNC tekinimo staklės
MAZAKQTN nexus 200

Skambinti

Mažas skelbimas

Aflenz Land

1 035 km

Universalus apdirbimo centras
DMG MORIDMU 60 eVo

Skambinti

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2012, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 500 mm, greitas poslinkis X ašimi: 80 m/min, greitas poslinkis Y ašis: 80 m/min, greitasis eiga Z ašyje: 50 m/min, valdiklių gamintojas: Heidenhain, valdiklio modelis: iTNC530, stalo apkrova: 400 kg, veleno greitis (maks.): 24 000 aps./min, veleno veikimo valandos: 17 917 h, įrankių magazino lizdų skaičius: 60, Įranga: sūkių greitis be galo kintamas, Machine Description: - Universal 5-axis milling machine with linear drives on X and Y axes, rapid traverse 80 m/min - Spindle and geometry in very good condition - Regularly serviced - Last spindle replacement: 08/2020 / New control panel installed: 09/2025 - Current operating hours: Machine ON: 58,985 h / Spindle ON: 17,917 h - Machine location: Lower Austria (near Vienna) Travel Range: X-axis (longitudinal): 600 mm Y-axis (cross): 500 mm Z-axis (vertical): 500 mm Clamping Table / Working Area: Integrated NC rotary table: 600 x 500 mm Table load capacity: 400 kg Control System: Heidenhain iTNC530 Spindle: Speed range: 24,000 rpm Tool holder: HSK63 Coolant System and Chip Disposal: External coolant with 3 nozzles: 4 bar Internal coolant: 40 bar Paper band filter Scraper-type chip conveyor Automatic Tool Changer: Tool holder: HSK63 Positions: 60 Dimensions and Weight: Machine: Length 2,900 x Width 2,611 x Height 2,865 mm Weight: ~9,800 kg Additional Equipment and Accessories: › Heidenhain TS 649 touch probe › Heidenhain electronic handwheel › Blum laser tool measurement system on table › Chip flushing pistol › 3D Quick Set › ATC cycle package Kedpfx Aeya U Ibjbrowu › Operating mode 4 › Integrated oil mist extraction › Operating manual / Documentation › Dynamic package: linear drive 80 m/min including active cooler

Peržiūrėti detales

Mažas skelbimas

Thurmaston

1 651 km

Universalus apdirbimo centras
DMG MORIDMU 60 eVo

Skambinti

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2018, Tischgröße 600 x 500 mm Durchmesser, Tischbelastung 400 kg, Verfahrwege XYZ 600 x 500 x 500 mm, B-Achse -5/+110 Grad, C-Achse 0,001 Grad, Eilgang 80 m/min, Werkzeugwechsler mit 120 Plätzen, Spindelaufnahme HSK 63, Spindeldrehzahl 20.000 U/min, Steuerung Siemens 840D eRGOline, Späneförderer, Kodpownpzaofx Abrswu Innenkühlung durch die Spindel.

Peržiūrėti detales

Mažas skelbimas

CNC apdirbimo centras - 5 ašys DMG MORI DMC 60 FD

Halberstadt

923 km

CNC apdirbimo centras - 5 ašys
DMG MORIDMC 60 FD

Skambinti

Sąlyga: geras (naudotas), Gamybos metai: 2009, Ref. No.: 10556 Manufacturer: DMG MORI Model: DMC 60 FD Year of manufacture: 2009 Control type: CNC Control system: Siemens 840DSL-721 Location: Halberstadt Country of origin: Germany X travel: 630 mm Y travel: 800 mm Z travel: 850 mm Kwodexc Tt Tjpfx Abrsu Max. workpiece diameter: 600 mm Max. workpiece weight: 400 kg Spindle speed: 12,000 rpm Tool changer: 60 positions Max. workpiece height: 500 mm Machine weight approx.: 10 t Number of pallets: 2 Motor spindle: 24,000 rpm Additional information: - Internal cooling - B-axis swivel range -5/ +110° - Cooled table support, table bearings and motors - Cooled bearing blocks and ball screw nuts - Cooled linear guides on X/Y/Z axes - Drive power: 100% duty cycle/40% duty cycle 24 kW/35 kW - Chip conveyor - Internal coolant supply - Electronic handwheel - Rotary table turning function - Operating mode 4 - 2 pallets, Ø 630 mm - Pallet changer with rotary function - High-pressure coolant supply 40 bar, 980 litres, paper band filter - Dsc Htetzywvjlwwxokp - Heidenhain touch probe - 3D Quickset Machine can be inspected under power by prior arrangement.

Peržiūrėti detales

Mažas skelbimas

Wölzing-Fischering

1 128 km

Universalus apdirbimo centras
DMG MORIDMU 60 evo

157 000 €

fiksuota kaina neįskaitant PVM

Skambinti

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 500 mm, DMG-Mori DMU 60 Evo Linear Valdymas Heidenhain ITNC 530 HSCI NC pasukamas-šlifuojamas stalas 600 mm x 500 mm B ašies pasukimo diapazonas -5° iki +110° C ašis 360°, įskaitant stalo aušinimą Veleno apsukos 20 - 24 000 aps/min HSK 63 A Įrankių magazinas su 120 vietų Infraraudonųjų spindulių matavimo jutiklis Renishaw OMP 60 Dynamic paketas, Lazerinis įrankių matavimas Kwedpexvhtnjfx Abrou IKZ su 40/80 barų su popierinės juostos filtru 980 l, drožlių transporteriu Elektrinis rankinis ratas. 3D Quickset ATC, programuojami aušinimo purkštukai per M-funkciją Darbo režimas 4 Tropic paketas

Peržiūrėti detales

Mažas skelbimas

Gerstetten

1 193 km

Universalus apdirbimo centras
DMG MORIDMU 60evo

127 000 €

fiksuota kaina neįskaitant PVM

Skambinti

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 600 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 500 mm, Įranga: drožlių transporteris, sūkių greitis be galo kintamas, DMG-MORI DMU 60 EVO linear, 2014 m. X/Y/Z eiga: 600 mm x 500 mm x 500 mm Pagrindinis velenas SK40 su 18 000 aps./min. NC pasukamas-sveriamas stalas, B ir C ašys Įrankių sandėlis su 60 vietų Šilumokaitis velenui ir stalui Dynamic paketas Siemens 840 D SL valdymas su Shop-Mill Infraraudonųjų spindulių matavimo zondas Heidenhain TS 649 Blum lazerinis įrankio matavimas Grandininis transporter, IKZ su popieriniu juostiniu filtru ir 80 bar slėgiu Kwodpfx Aoxvhrwobreu Alyvos rūko-emulsijos separatoriaus Programuojamos aušinimo skysčio purkštukai Elektrinis rankenėlė, darbo režimas 4 Staklių tekinimo ir frezavimo ciklas

Peržiūrėti detales

Mažas skelbimas

Apdirbimo centras - universalus DECKEL MAHO DMC 80 FD

Grüsch

1 339 km

Apdirbimo centras - universalus
DECKEL MAHODMC 80 FD

Skambinti

Sąlyga: naudotas, Gamybos metai: 2008, x-travel 800 mm y-travel 700 mm z-travel 600 mm Control: SIN 840D Powerline Spindle speeds - stepless: 1 - 8,000 rpm Drive power 40% duty cycle: 28.00 kW Spindle diameter at front bearing: 80.00 mm Spindle taper: HSK-A100 B-axis: 187° Feed rate X/Y/Z-axis: 15,000 mm/min Rapid traverse X/Y/Z: 50.00 m/min Feed force X/Y/Z-axis: 10,000 N Rapid traverse B-axis: 11.20 rpm Pallet size: 800 x 630 mm Table load capacity: 0.80 t Kwedpfx Absw Df A Sereu C-axis: 360.000 x 0.001° Table speed range: 1 - 500 rpm Tool magazine: chain magazine for 120 tools Tool diameter: 100 mm Tool diameter with 2 free adjacent spaces: 160 mm Maximum tool length: 350 mm Maximum tool weight: 10.00 kg Total connected load: 60.00 kW Machine weight approx. 13.00 t Space requirements approx. 7.40 x 5.30 x H3.50 m Equipped with Siemens SIN840D control, tool taper cleaning, tool breakage monitoring, coolant system, 2 pressure stages (40 bar / 80 bar), chip conveyor, operation mode 4, extraction system.

Peržiūrėti detales

Mažas skelbimas

5 ACHS apdirbimo centras DMG MORI DMU 60 Evo

Friesenheim

1 332 km

5 ACHS apdirbimo centras
DMG MORIDMU 60 Evo

Skambinti

Sąlyga: geras (naudotas), Gamybos metai: 2014, veikimo valandos: 21 000 h, Funkcionalumas: visiškai funkcionalus, DMG MORI DMU 60 Evo 5-axis simultaneous machining center (2014) Manufacturer: DMG Mori Model: DMU 60 Evo 5-axis simultaneous Year of manufacture: 2014 Condition: Good, used, new spindle in 2024 Power-on hours: 37,063 h Spindle hours: 21,313 h Control: Heidenhain ITNC 530 Condition: Used, ready for operation Travel (X/Y/Z): 600/500/500 mm Kwedpfx Aewp Ic Eebrou Rapid traverse: 80 m/min Spindle speed: 20–14,000 rpm Tool magazine: 30 positions Tool holder: SK40 NC swiveling rotary table: 600 x 500 mm Internal coolant supply (IKZ): 40 bar with belt filter system Measuring probe: TS649 Documentation

Peržiūrėti detales

Reklamuokite čia