Universalusis mašinų centras

DMG MORI DMC105V Linear

Sąlyga: naudotas, Technical details: Kwodpfxowrq Txo Af Iot Welding current: 500 A Length: 1200 mm Height: 1260 mm Connected load: 26.6 kVA Power rating: 100 kW Open-circuit voltage: 65 V Approx. machine weight: 147 kg Machine dimensions: 1.2 x 0.45 x 1.2 m Welding cable with welding torch

Sąlyga: geras (naudotas), Gamybos metai: 2009, padavimo ilgis X ašis: 6 000 mm, padavimo eiga Y ašimi: 3 000 mm, padavimo ilgis Z ašis: 1 500 mm, valdiklio modelis: HAIDENNAIN, ruošinio ilgis (maks.): 6 000 mm, ruošinio plotis (maks.): 2 500 mm, stalo plotis: 6 000 mm, stalo ilgis: 2 500 mm, Gantry milling machine with 5-axis head Kedpfx Aevcqybef Iewt

Sąlyga: beveik kaip naujas (naudotas), Niemann Butterfly Dissolver VKDVB 332-20 Vacuum version with Busch vacuum pump Power: 15 kW with wall scraper Speed range: 0-240 rpm, adjustable via frequency converter Control cabinet 3 mixing containers, each 300 l stainless steel Matching equipment: Niemann/Gehalin H 500 discharge device D=700 mm Kjdewmaxmepfx Af Iowt for 300 l mixing containers Excellent condition, directly from production!

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2005, X ašies eiga: 600 mm, Y ašies eiga: 450 mm, Z ašies eigos atstumas: 400 mm, greitas poslinkis X ašimi: 35 000 m/min, greitas poslinkis Y ašis: 35 000 m/min, greitasis eiga Z ašyje: 35 000 m/min, ruošinio svoris (maks.): 200 kg, bendras ilgis: 500 mm, bendras plotis: 400 mm, stalo apkrova: 200 kg, sukamosios stalo skersmuo: 280 mm, Coolant system Filtration tank HR 410 handwheel iTNC530 controller 1st owner machine X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 400 mm A-axis travel: 110° B-axis travel: 360° Table length: 500 mm Table width: 400 mm Table load capacity: 200 kg Table diameter Ø: 280 mm Feed rate X-axis: 35,000 mm/min Feed rate Y-axis: 35,000 mm/min Feed rate Z-axis: 35,000 mm/min Feed rate A-axis: 10°/min Kwjdpfx Aox R S Smjf Iot Feed rate B-axis: 15°/min Tool holder: 40 ISO/BT/MK Spindle power: 15 kW Spindle speed: 18,000 rpm Tool changer: 30 positions Through spindle coolant (IKZ): 20 bar Number of controlled axes: 5 Chip conveyor: Yes Coolant unit: Yes Length: 3,500 mm Width: 3,500 mm Height: 2,800 mm Weight: 6,600 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend that you verify all critical details.

Sąlyga: geras (naudotas), Gamybos metai: 2002, HEIDENHAIN TNC 430 control Spindle speed: 20 – 9,000 rpm Travel paths: X = 500 mm, Y = 400 mm, Z = 400 mm Tool holder: SK 40 Tool changer with 16 stations Rotary table with B and C axis Kwsdpewglfxsfx Af Ist Clamping surface: Ø 700 x 500 mm Max. table load: 200 kg Infrared probe for workpiece measurement

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2017, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 800 mm, Y ašies eiga: 800 mm, Z ašies eigos atstumas: 550 mm, veleno greitis (maks.): 18 000 aps./min, bendras svoris: 12 500 kg, Siūlome labai geros būklės Hermle C42U Dynamic su šiomis opcijomis: Dynamic variantas su Ø800 x 630 stalu Vidinis aušinimas su popierine filtro juosta Heidenhain jutiklis Kwjdpjya I Disfx Af Ist Blum lazeris

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1998, x-axis travel: 800 mm y-axis travel: 600 mm z-axis travel: 500 mm O F F E R We are pleased to offer you, subject to prior sale and errors excepted, the following from stock, non-binding: HERMLE 5-Axis Universal Machining Center in gantry design with swivel rotary table Model: C 800 U Year of manufacture: 1998 12648 _____ Milling head travel longitudinal X-axis: 800 mm Milling head travel transverse Y-axis: 600 mm Milling head vertical Z-axis: 500 mm NC tilting axis A-axis: -20 / +90 ° NC rotary table C-axis: 360,000 ° Overhang of the vertical spindle max. approx.: 600 mm Installation height under spindle max. approx.: 100 / 600 mm Table size (swing diameter Ø 630 mm): 540 x 540 mm Max. workpiece weight on table approx.: 300 kg Spindle interface: SK 40 Spindle speeds vertical, infinitely variable: 18,000 rpm Feed rates/rapid traverses infinitely variable: 2 – 35,000 mm/min Feed force approx.: 11/16 Nm Spindle drive: 15 kW Total power approx.: 37 kW – 400 V – 50 Hz Weight approx.: 8,000 kg Accessories / Special Features: • Compact, modified gantry design with 3 axes in the milling head for feed rates up to 35 m/min. All drives and guides are outside the working area. • Machine base made of mineral cast with high damping properties, foundation-free installation, high static and dynamic stability. • SIEMENS 5-axis path control type 840 D with graphics and all modern programming options for full 5-axis machining of complex workpieces with electronic handwheel • NC swivel rotary table (C-axis 360,000° / B-axis -20/+90°) Ø 630 mm • Robust vertical head with HERMLE milling spindle up to 18,000 rpm with automatic swivel nozzle block • Tool changer with extended (additional) magazine for up to 87 tools • Coolant system with chip conveyor, oil mist extraction with filter, full enclosure • Extensive accessories including approx. 50 tool holders, operating manuals. Condition: very good – machine under power and ready for demonstration A video of the machine will be available here shortly (please click on the link): C 800 U/4 Kodpfxox Dndce Af Ijwt Delivery: ex stock – immediately available, FCA Metzingen Payment: strictly net – due immediately upon receipt of invoice, prior to delivery of the machine

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, veikimo valandos: 66 600 h, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, We offer you the following: Technical Data: Control system: Heidenhain iTNC 530 HSCI Travel distances: - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Main spindle: Kwsdpfxjxgnz Tj Af Iet - Speed range: 20 – 18,000 rpm NC rotary table: - Clamping surface: 600 x 500 mm - Max. table load: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary tilting table including table cooling - BLUM NT laser tool measurement system - Calibration arbor with tool holder - Wireless touch probe, Heidenhain TS 649 - 3D quickSET preparation - Scraper-belt chip conveyor - ICS (internal coolant supply), 40 bar, 600 l tank, incl. rotating sight glass, air purge, linear measuring systems, bed flushing - Rinsing gun - Mechanical oil and emulsion mist separator - Air blast through spindle center - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of zero-point clamping system - Selection and deselection of handling system via switch on the machine control panel - incl. additional rinsing inside the working area - incl. machine preparation for job management - incl. control panel arrangement on the left - Energy supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 – 240 bar, pressure adjustment via proportional valve technology - incl. rotary union extended to 4 channels Power-on hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the images is not included in the scope of delivery. The machine will be available approximately from October/November 2025. The ball screws and linear guides in the X and Z axes have been renewed. Accessories, depicted tools, and clamping devices are only included if specified in the additional information. Technical data and details subject to change and prior sale. Errors excepted!

Sąlyga: naudotas, Gamybos metai: 2009, Offered here is a used machining centre from the manufacturer Deckel Maho DMG. The machine is under power and can be inspected in our facility. Free loading onto truck Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Control system: Siemens 840 D Solutionline (PCU 50) Technical data: Travel X-, Y-, Z-axis: 1250 x 1000 x 1000 mm Feed rate X-, Y-, Z-axis: 20 - 60,000 mm/min Rapid traverse X-, Y-, Z-axis: 60 m/min B-axis travel: 360 x 0.001° B-axis feed rate: 10,800 °/min Maximum table rotation: 30 rpm Spindle speed: 20 - 8,000 rpm Gear steps: 2 Maximum workpiece diameter: 1250 mm Maximum workpiece height: 1580 mm Clamping surface: 800 x 800 mm Maximum workpiece weight: 1,500 kg Pallet weight: 570 kg Kwedpfx Ajw Ew T Ssf Iet Maximum allowable pallet load difference: 1,000 kg Tool holder: SK 50 according to DIN 69871 Maximum tool length: 650 mm Tool magazine: 120 positions Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of the machine (without magazine or other accessories): approx. 20,000 kg Space requirement: approx. 7,000 x 6,000 mm Total machine weight: 24,000 kg Accessories: Chip conveyor with coolant tank Coolant system 4x machine pallets Tool magazine Oil mist extraction system Various new spare parts: 1x Length measuring system Y-axis (new) 1x Lubrication unit 230V 0.12 30bar (new) 1x GEAR UNIT P-AGG*MKF1-KW2-20036 (new) 1x Cyclo gearbox*F1C-A25 (new) 1x Retrofit kit power module (new) 1x Lifting devices for the machine

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2014, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: GS1000/5-T, sukimosi greitis (maks.): 30 000 aps./min, bendras svoris: 15 500 kg, Pagaminimo metai: 2014 Būklė: labai gera Magazinas: 66 x HSK63 Valdymas: Heidenhain 530 Velenas: n=30.000 Erowa nulio taško tvirtinimo sistema integruota stalo viduje Erowa robot easy 250 automatizacija su 6 padėklais 3D matavimo sistema Didelio dažnio veleno alyvos-oro tepimas Lazerinis matavimas Kwodpfx Ajw Awmtef Ijt Veleno darbo valandos: