DMG MORI - DMC 160H duoBLOCK

DMG MORI DMC 160H duoBLOCK

Sąlyga: naudotas, Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, CNC SMOOTH G, eigos 730 x 730 x 730 mm, 2 paletės 500 x 500 mm, veleno greitis 18 000 aps./min, 120 įrankių rezervuaras, max. detalės skersmuo 800 x 1000 mm, greiti judesiai 60 m/min, vidinis aušinimas 15 bar, RENISHAW paruošimas, NC pasukama stalas 360,00 pozicijų, CONCEP transporteris. Hjdpfx Ajxcvycegiji

Sąlyga: naudotas, Gamybos metai: 2007, x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm Control: Sinumerik 840 D Siemens Maximum clearance between columns: 3,000 mm Maximum clearance height: 1,950 mm Maximum distance from spindle center to table: 1,800 mm Distance spindle nose to table: 1,350 / 1,500 mm Type P 8005020/00-4 Main spindle speed range: up to 18,000 rpm Main spindle drive power: 20 kW Max. torque: 48 Nm Tool holder: HSK-A63 DIN 69063 Spindle extension: 450 mm Swiveling B-axis: +110° / -10° Hodpfx Agsvy Ihdoisi Rotating C-axis: +/- 200° Type P 8002320/00-4 Main spindle speed range: 20 - 5,000 rpm Main spindle drive power: 40 kW Max. torque: 1,100 Nm Tool holder: HSK-A100 DIN 69063 Spindle extension: 300 mm Swiveling B-axis: +110° / -10° Rotating C-axis: +/- 200° Table clamping surface: 4,000 x 2,200 mm (2x) Max. table load: 12 / 20 t Height above floor: 700 mm Number of T-slots: 11 + 19 T-slot width: 28H7 mm T-slot spacing: 200 mm Number of tool positions: 327 pcs. Number of tool positions HSK A63: 156 pcs. Number of tool positions HSK A100: 171 pcs. Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 / 500 mm Max. tool weight HSK A63: 5.0 kg Max. tool diameter HSK A100: 315 mm Max. tool length HSK A100: 500 / 800 mm Max. tool weight HSK A100: 40.0 kg Feed rate X: max. 30,000 mm/min Feed rate Y/Z: max. 40,000 mm/min Feed rate B: 3,600 °/min Feed rate C: 2,160 °/min Acceleration X: max. 1.5 m/s² Acceleration Y/Z: max. 3.2 m/s² x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm b-axis +110° / -10° c-axis +/- 200° Total connected load: 150 kVA Space requirement approx. 25.0 x 12.0 x 7.0 m 5-Axis Gantry Large Machining Center DROOP + REIN - TFS 22 40 DT D40 P - Two milling heads - approx. 4,000 operating hours - X-axis 10,000 mm (coupled) / 2x 5,000 mm (single table) - 3 simultaneous axes (X, Y, Z) - 2 positioning axes (B, C) - Tools subject to agreement

Sąlyga: naudotas, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 15 kW Hsdsuhampopfx Agiei - Spindle speed: 5,500 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle drive power: 15 kW - Spindle speed: 5,500 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Traverse path: 330 mm TURNING-MILLING SPINDLE - Travel X/Z: 410/400 mm - Travel Y: 200 mm - B-axis stroke: -25/+115° - Minimum B-axis resolution: 0.001° - Tool type: HSK40 - Spindle speed: 30,000 rpm - Spindle drive power: 8 kW TOOL CHANGER - Tool changer type: Parapluie - Number of tools in magazine: 60 - Tool change time: 1.2 sec - Number of positions: 60 ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Space requirement: 3,300 x 2,900 mm - Machine height: 2,100 mm - Machine weight: 5,000 kg MACHINE HOURS - Operating hours: 11,659 h ACCESSORIES - Control: Fanuc 31i model A5 - Absolute path measuring systems - Coolant tank * with high-pressure pump: 70 bar * Internal coolant supply (ICS) - Oil mist extraction: ELBARON RON/A 100 DV - Spindle cooling - Workpiece probing system: Renishaw OMP40-2 - Parts removal device - 1 NAKANISHI spindle HTS1501S: 150,000 rpm - Fire extinguishing system * * NB: Functionality not guaranteed. To be checked by a qualified company chosen by the buyer. - Bar puller

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2019, X ašis: 5 000 mm Y ašis: 3 000 mm Z ašis: 1 500 mm Hedpfjx E S E Nsx Agiei Stalo dydis: 5 000 x 2 500 mm Įrankio tvirtinimas: HSK 63 Įrankių keitiklis: 60 pozicijų Valdymas: HEIDENHAIN TNC 640 Įskaitant vidinį aušinimą 40 bar (IKZ) Įskaitant sinchroninę šakutinę galvą Pilna dokumentacija Įskaitant IKZ 40 bar

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, Daugiafunkcis CNC tekinimo-gręžimo-frezavimo centras / Gamintojas: WFL Tipas: M120 MILLTURN x 3000 / Metai: 2008, kapitališkai suremontuotas 2025 m. TECHNINIAI DUOMENYS: Darbo sritis: - Ašies atstumas / Tekinimo ilgis (priklauso nuo tvirtinimo sistemos): 3 000 mm - Darbinis skersmuo virš lovos (maks. vardinis): 1 220 mm - Darbinis skersmuo virš viršutinio supintuvo: 1 140 mm Priedai / Įranga: - CNC valdymas Siemens SINUMERIK 840D pl - Tekinimo/gręžimo/frezavimo blokas - NC galinis centras Hsdoxt Uqhopfx Agioi - Išorinis įrankių magazinas, 90 vietų - Pick-up stotis - Aušinimo sistema - Drožlių transporter - Kita išsami komplektacija ... Išsami techninė specifikacija ir informacija apie komplektaciją pateikiama pagal užklausą. Nesuteikiama garantija dėl techninių duomenų ir įrangos pilnumo bei tikslumo.

Sąlyga: geras (naudotas), Gamybos metai: 2021, veikimo valandos: 10 000 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 750 mm, Y ašies eiga: 650 mm, Z ašies eigos atstumas: 560 mm, nominali (akivaizdi) galia: 35 kVA, valdiklių gamintojas: Siemens, valdiklio modelis: 840 D sl, stalo plotis: 650 mm, stalo ilgis: 800 mm, sukimosi greitis (maks.): 20 000 aps./min, ašies skaičius: 1, įrankių magazino lizdų skaičius: 120, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, 3D matavimo zondas SK 40 nauja frezavimo verpstė Hedpfjw Av Hfex Agioi Įrankių vietos: 120 Quickset

Gamybos metai: 2000, Sąlyga: naudotas, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control: WENZEL WPC 2040/FW31.351 Total power requirement: kW (not specified) Machine weight approx. 5500 kg Space requirement approx.: m (not specified) Hjdpjt Hw Nysfx Agioi WENZEL CNC-controlled vertical 3-D coordinate measuring machine Model: LH 108 CNC Year of manufacture: 2000, but continuously serviced and calibrated by manufacturer Axis configuration: - Y-axis as long-travel measuring bridge: 1,600 mm - X-axis as measuring head carriage (cross travel): 1,000 mm - Z-axis as vertical measuring quill: approx. 800 mm Maximum workpiece weight / table load: approx. 2,250 kg Clearance under measuring bridge: approx. 900/1000 mm Overall table size: approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Table plate thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special Features / Accessories: • Measuring table, crossbeam, and quill made from dark natural hard stone; table with 6 x 9 threaded holes for workpiece/fixture clamping • All axes are air-bearing for smooth, virtually wear-free operation; equipped with incremental scales, 0.0005 mm resolution • WENZEL CNC control type WPC 2040 / FW31.351 built into worktable (controller replaced approx. 3 years ago) • WENZEL measurement software METROSOFT QUARTIS R 12 SP 1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° increments), probe head model PH 10 M plus, with TP 20 probe and various probe accessories • RENISHAW probe head controller unit type PHC 10 C-3 plus, also built into the worktable • Automatic probe changer, 6-position probe magazine model MCR 20 mounted on the table • Mobile hand control panel with progressive control lever (joystick) for manual adjustment of all 3 axes with infinitely variable travel speeds • Sphere standards for table setup, work table, various clamping devices, etc. Condition: Very good – generally in stock, powered for inspection. Ready for demonstration. Disassembled by a CMM specialist at the seller and reassembled here. Delivery: Ex-stock – as is, as inspected Payment: strictly net – upon receipt of invoice.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, veikimo valandos: 87 327 h, Funkcionalumas: visiškai funkcionalus, We offer you: CNC Machining Centre – Universal Manufacturer: DMG MORI Model: DMU 210P duoBlock µ-Precision Year of manufacture: 2013 Hedpfx Agsyhbcueioi Control: Siemens 840D sl Technical specifications: Travels: X-axis: 1,800 mm Y-axis: 2,100 mm Z-axis: 1,250 mm Rotary range: 360° Main spindle: Max. speed – main spindle: 18,000 rpm Drive power – main spindle (100/40%): 35 / 25 kW Rotary table: Table diameter: 1,700 mm Tool changer: Tool holder: HSK-63A Number of tool positions: 120 pos. Operating hours: approx. 87,327 h Spindle hours: approx. 48,297 h Technical features & accessories: - Universal milling head with controlled B-axis - NC rotary table with cooled drive train - Tool measurement in the working area, BLUM Laser NT Hybrid (colour) - Coolant supply through spindle centre at 40 bar - Coolant tank 2,500 l - Chip conveyor - Rotating viewing window - Electronic handwheel - 3D path control - Infrared probe, Renishaw PP60 optical (OMP 60) - 3D quickSET - 4-colour signal lamp - Rinsing gun with pump - Operating mode 4 - Machine adaptation for aluminium and glass processing, consisting of: - Linear guides with additional Viton wipers - Ball screws partially with additional Viton/felt scrapers - Sealing air for all linear measuring systems - Reduction of lubrication intervals to 10 to 15 minutes (overlubrication) - Adaptation of the maintenance schedule for steel covers - Interface for camera monitoring and integration into the control system - Machine prepared for vacuum setup, consisting of: - 2-channel rotary feedthrough, special centring sleeve and cable routing in the T-slots to the table edge - Additional compressed air connection at the table plate edge (opposite vacuum connection) - Vacuum monitoring integration at terminals with NC stop and error message “Vacuum error” - Oil-resistant rubber hose with mounting via 2 clamps on the rotary feedthrough - Evaluation of the “minimum level” error in feed and spindle stop - Coolant flow monitoring for internal and external coolant supply - Cable routing prepared for use of the spindle growth sensor (SGS) At the beginning of 2025, the ball screws and linear guides on the x, y and z axes were replaced. Accessories, displayed tools and clamping devices are only included in the scope of delivery if specified in the additional information. Technical data and information subject to change and errors excepted. Intermediate sale reserved!

Sąlyga: naudotas, Gamybos metai: 2017, Įjungimo valandos: 51 800 h Programos darbo valandos: 15 100 h Techniniai duomenys: Judėjimo intervalai/ašys: Hsdexqp Ivjpfx Agisi X = 800 mm Y = 850 mm Z = 1 050 mm B = 360°, 0,001° Maks. apsukos: 12 000 1/min Bendroji prijungimo galia: 77 kVA Reikalinga vieta (Ilg.xPl.xAukšt.): 9 000 x 5 500 x 4 000 mm Svoris: 18 100 kg Įranga: - Siemens 840D - Elektrinis rankinis ratukas - Sunkios apdirbimo komplektas - Įrankių keitiklis, 180 vietų ratinis žurnalas - Įrankio laikiklis HSK 100 - Valdymo pultas - Vidinė aušinimo skysčio tiekimas - Matavimas ir stebėjimas Renishaw, infraraudonųjų spindulių TDS, MPC

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Kunzmann WF4/3 with Heidenhain TNC 320 CNC Control – Excellent Condition | CE Compliant | Ex-Training Workshop! Technical Data: >> Year of manufacture: 2010 | Machine No. 347283 >> Fixed angle table >> Infinitely variable spindle speed up to 4,500 rpm >> Infinitely variable feed in 3 axes from 0 to 2,000 mm/min >> Rapid traverse: X and Y axis 5,000 mm/min | Z axis 4,000 mm/min >> Travel x/y/z: 400/350/400 mm >> Table size: 650 x 350 mm >> Table load: 250 kg >> Vertical quill travel: 60 mm >> Vertical and horizontal quill - SK40 taper >> Hydraulic clamping system >> Weight approx. 1,800 kg >> Space requirement approx. 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories & Equipment: >> Heidenhain TNC 320 path control >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts manuals, control unit operating instructions, and programming examples >> Handwheels >> Coolant system >> Electronic handwheel HR410 About This Machine: Hedpfx Aoxuppujgiji We offer here a Kunzmann WF4/3 universal milling machine equipped with a Heidenhain TNC 320 path control unit. This machine is in excellent condition with very low operating hours, coming from an educational facility where it was used solely for training purposes. The TNC 320 features an intuitive, easy-to-use control interface. Both vertical and horizontal clamping are hydraulically operated. Changing from vertical to horizontal operation is extremely straightforward thanks to the pivoting vertical head. The machine’s guides are regularly lubricated by the central automatic lubrication system. This Kunzmann has been mechanically and electrically tested in our facility. Take advantage of the opportunity to inspect and test the Kunzmann powered up on-site. We currently have 7 units of the Kunzmann WF4/3 with Heidenhain TNC 320 milling machines available. The machines are immediately available.