CNC tekinimo ir frezavimo centras

DMG GILDEMEISTER CTX420 Linear V4

Būklė: naudotas, Gamybos metai: 2005, Technical Details: Turning diameter: 275 mm Turning length: 900 mm Spindle bore: 65 mm Drive power at 100% duty cycle: 25/20 kW Spindle speeds: 1 - 5000 rpm Spindle diameter at front bearing: 110 mm C-axis: 1 - 500 rpm Number of tool carriers: 4 Turret: 1 X-axis: 290 mm Y-axis: 165 mm Z-axis: 360 mm B-axis: 360° Rapid traverse speed: 18/30 m/min Number of tools: 2x2 + 2x2 Number of driven tools: 2x2 + 2x2 mm Tool speeds: 8000 / 2000 rpm Drive power at 25% duty cycle: 5.8 kW Tool holder: TRAUB 60 Turret: 2/3/4 X-axis: 170 mm Z-axis: 600/950 mm Y-axis: +/- 60 mm Rapid traverse speed: 18/15/30 m/min Number of driven tools: 10 mm Tool speeds: 1 - 6000 rpm Drive power at 25% duty cycle: 5.8 kW Tool interface: DIN 69880 40 x 63 Total connected load: 95 kW Machine weight approx.: 16 t Space requirement approx.: 10.0 x 3.5 x 3.0 m Equipped with CNC TRAUB TX 8i, bar feeder TRAUB Stamag DNH61 / 3000, main and counter spindle with C-axis 1 vertical tool carrier with B-axis 3 turret tool carriers Extraction unit, coolant system with coalescence separator and chip conveyor 2 pcs. 3-jaw chucks SMW KNCS-N 170-43 2 pcs. HAINBUCH clamping chucks Spanntop Gusdpfewp D Nbex Af Dsa 40 pcs. various static tool holders 6 pcs. various driven tool holders Spare parts package

Gamybos metai: 1992, būklė: naudotas, Grinding height 50 mm Grinding width 120 mm Grinding wheel diameter 600 mm Total power requirement 85 kW Machine weight approx. 9,500 kg D I S K U S CNC-controlled, vertical double-sided surface grinding machine with rotating workpiece feed and IONIC measuring control. Type: DDS 600 III PRM - CNC Year of manufacture: 1992 # 7924 _____ Grinding wheel dimensions (each): 600 x 150 x 75 high mm Workpiece data: Grinding height: approx. 1.5 – 50 mm Grinding width: approx. 20 – 120 mm Vertical slide adjustment, each: approx. 150 mm Grinding wheel infeed via CNC: 0.0001 mm Workpiece transport device feed continuously adjustable: 40 - 235 mm/sec. Grinding wheel speed (30 m/s): 191–955 rpm Grinding spindle drive, infinitely variable (per spindle): 37 kW Gusdpfx Ast Hw Naof Dea Total drive approx. 85 kW / 380 V / 50 Hz Weight approx. 9,500 kg Accessories / Special Equipment • SIEMENS CNC control SINUMERIK 810 G with monitor, for 4 axes (top and bottom infeed, dresser, and workpiece table rotation), direct input of all grinding data, and in conjunction with • IONIC measuring control no. 17 A with 2 measuring probes for scanning workpieces after the grinding cycle, triggers corresponding infeed of the grinding wheels, continuous measurement data displayed on the monitor for statistics, workpiece counting, etc. • Digital display of power (amperes) for the drive motors and the grinding wheel speed • Gantry design for increased rigidity and improved grinding accuracy • Rotational workpiece transport with continuously variable speed control as the 4th axis • Position control device for monitoring the position height of the lower grinding wheel • 2 adjustable workpiece hold-downs at both in-feed and out-feed, with height monitoring, simple raw part stacking device, and finished part discharge via conveyor belt • Semi-inclined, side-mounted grinding wheel dressing unit with pre-programmable dressing sequence, integrated as CNC axis in the control, with safety shut-off • Large separate switch cabinet, automatic central lubrication system, advanced pneumatic setup • Large PROMATEC (F) coolant unit with filtration and magnetic separator • Various grinding wheels, flanges, table segments, transport discs, large fume extraction system, etc. This machine is particularly suitable for the simultaneous plane-parallel grinding of workpieces in large series, such as stamped parts, piston rings, hydraulic parts, etc. Condition: good to very good – ready for demonstration shortly Delivery: ex stock – as inspected Payment: net – upon receipt of invoice This represents a rare opportunity regarding both condition and price. If you require another grinding machine – especially from the manufacturer DISKUS – please send us your inquiry.

Būklė: geras (naudotas), cilindrinės šlifavimo staklės Guedpfx Aotrgndof Doa

Gamybos metai: 2020, būklė: naujas, Transport systems Depending on customer requirements, transport systems can either move along the floor or be suspended from rails. - For convenient manual installation solutions, we recommend suspended cross beams (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These do not stop and present an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously, for example with several booths using different colours, flexible solutions based on non-powered conveyors are used. This is the most expensive option. All installations are custom-built based on customer specifications. Continuous overhead chain conveyor systems are designed and manufactured according to individual client orders. It is also possible with this system to produce floor conveyor systems on which items such as flowerpots or rims (see photo) can be arranged. ROMER also produces overhead transport systems. Cross beams (transverse conveyors) are designed and manufactured for the requirements of specific installations. Guodpefz U S Eofx Af Doa Use of photoelectric cells Using a photoelectric cell in the product area allows you to measure the length and thus gives the option to activate the guns as soon as the item is within their range, and to switch them off immediately after coating. The photoelectric cell is standard equipment. Identification of items using special markings. Above the carrier loop, there are panels with identification holes. Based on this, the PLC controller, in conjunction with the photoelectric cell, recognises the coated item and switches the guns on and off at the correct time – saving energy and powder coating material. Vertical shape detection. By using light barriers with horizontal sensors, the PLC control can analyse the vertical shape of a part. The PLC tracks the time at which the part should appear in the gun area—this allows for selective activation/deactivation of the guns. With light gates equipped with multiple sensors positioned both horizontally and vertically, this solution enables precise measurement of the workpiece’s dimensions, which also allows for the control of manipulators.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SL154SY, tekėjimo ilgis: 750 mm, sukimosi skersmuo virš skersinio stumduko: 510 mm, tekėjimo skersmuo: 680 mm, ašies variklio galia: 7 500 W, veleno greitis (min.): 50 aps./min, veleno greitis (maks.): 5 000 aps./min, veleno skylė: 56 mm, X ašies eiga: 215 mm, Y ašies eiga: 70 mm, Z ašies eigos atstumas: 550 mm, tvirtinimo skersmuo: 20 mm, greitas poslinkis X ašimi: 18 000 m/min, greitas poslinkis Y ašis: 6 000 m/min, greitasis eiga Z ašyje: 24 000 m/min, sukimosi greitis (maks.): 3 000 aps./min, sukimosi greitis (min.): 20 aps./min, įvesties srovės tipas: trifazis, padavimo ilgis X ašis: 215 mm, padavimo eiga Y ašimi: 70 mm, padavimo ilgis Z ašis: 550 mm, sukimo momentas: 70 Nm, strypo praėjimas: 56 mm, bendras aukštis: 2 015 mm, bendras ilgis: 3 336 mm, bendras plotis: 1 873 mm, Įranga: sūkių greitis be galo kintamas, STAKLĖS MORI SEIKI SL154SY SU LNS STRYPŲ PATEIKĖJU RENISHAW LAZERIU PATIKRINTA ĮRANKIŲ DĖŽĖ. STAKLĖS PATIKRINTOS IR PARUOŠTOS OPTIMALIOMS DARBO SĄLYGOMS. Guodoxddfvepfx Af Doa

Būklė: labai geros būklės (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, CNC tekinimo staklės Gamintojas: Gildemeister Modelis: CTX 420 linear V3 Pagaminimo metai: 2003 Valdymas: Heidenhain Plus IT Apsisukimų diametras virš staklių: 680 mm Apsisukimų diametras virš skersinio stalo: 565 mm Skersinis eigos ilgis: 260 mm Gujdsxc Uq Topfx Af Dea Išilginis eigos ilgis: 635 mm Variklio galia (40/100%): 25/37 kW Sukimosi greičio diapazonas: 20–5000 aps./min. Svoris apie: 6500 kg Įranga: - Varomi įrankiai: 12 pozicijų - Įrankių laikiklis: 12-pozicijų Sauter revolveris VDI 30 - Dalinai atidarytas spaustukas - Konusas - Automatinis konuso eigės ilgis - Konuso laikiklis: Mk 5 - Drožlių transporterio - Matavimo svirtis - Alyvos rūko nusiurbimo sistema Galimi netikslumai.

Būklė: naudotas, Gamybos metai: 2007, Swing diameter 640 mm Max. turning diameter 640 mm Control unit Siemens 840 D Powerline - - - - - Main Spindle - - - - - - - - - - - Bar diameter 65 mm Chuck diameter 200 - 315 mm Spindle bore diameter 80 mm Main spindle diameter at front bearing 120 mm --- Counter Spindle --- - - - - - - Bar diameter 65 mm Chuck diameter 315 mm Spindle bore diameter 80 mm Front bearing diameter 120 mm Gujdpfevx U A Sjx Af Doa - - - - - General Data - - - - - - - - - - - Spindle distance 1,500 mm Turning length 1,185 mm Main / Counter spindle speed 5,000 rpm Driven tool speed 12,000 rpm Slide travel X1, Y1: 550 / 180 mm Slide travel Z1: 1,185 mm Slide travel B1: 240° Slide travel X2: 180 mm Slide travel Z2: 1,050 mm Slide travel Z3: 1,150 mm CNC Turning and Milling Center | DMG GILDEMEISTER – GMX 250 linear with main/counter spindle, chip conveyor, tool changer, turret designed for driven tools, and equipped with a gantry loading system (Pneumotec gantry system S-01623a). The machine has only approx. 32,000 operating hours. The machine is in very good condition and can be inspected. ----- #Tags: GMX250linear | GMX-250 linear | GMX 250linear | GMX-250linear

Būklė: naujas, Prašome pilnai perskaityti techninius duomenis. Jei ši mašina Jums tinka kaip investicija, norėdami pateikti pasiūlymą prašome pilnai pateikti savo tapatybę su teisingu telefono numeriu ir el. pašto adresu. Pluoštinis lazeris 30W Žymėjimo sritis: 200 x 200 mm Maksimalūs ruošinio matmenys: Pl x Al x G: 550 x 450 x 350 mm Lazerių tipas: Pluoštas 30 W Bangos ilgis: 1064 nm Didžiausias žymėjimo greitis: 7000 mm/sek. Z ašis motorizuota, aukštis: 700 mm Gsderu E Svepfx Af Dsua Pakartojamumo tikslumas/objektyvas: +/- 0,001 mm Minimalus linijos plotis apie 0,01 mm Maitinimas: 240 V / 50 Hz Išoriniai matmenys: 110 x 80 x 200 cm Priekinės durys: rankinės Įskaitant programinę įrangą ir PC Galima apžiūrėti vietoje veikiantį prie elektros tinklo Kaina be PVM

Būklė: geras (naudotas), Gamybos metai: 2006, Gildemeister Twin 42, Year of manufacture: 2006, Control: Siemens 840 D, Turning length up to 210 mm, Spindle bore: 56 mm, Main spindle, Counter spindle, 1 x Y-axis, 2 x C-axis, 2 turrets, 12 stations each / all stations live (driven), Shank diameter: 25 mm, Driven tools up to 6,000 rpm, Bar feeder: FMB Turbo 10 - 72, Gusdpfxjwcyhto Af Doa Main spindle collet chuck, Counter spindle collet chuck,

Būklė: geras (naudotas), Gamybos metai: 2000, Įranga: dokumentacija / vadovas, COLCHESTER TORNADO 200 LATHE FANUC GE Series CNC SELF-CENTERING CHUCK DIAMETER: 250 mm TRAVELS: X: 215 mm Z: 400 mm TOOL TURRET: 12 POSITIONS INCLUDES VARIOUS TOOL HOLDERS AND ASSORTED TOOLS BAR CAPACITY: 65 mm PROGRAMMABLE TAILSTOCK Guedjtuut Ujpfx Af Dea CHIP CONVEYOR COMPLETE WITH ALL DOCUMENTATION