DMG DECKEL MAHO DMC 60H Linear

DMG DECKEL MAHO DMC 60H Linear

Būklė: naudotas, Gamybos metai: 2009, X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Djdpfx Afsx Tiy Tonjcf Control: SIEMENS SINUMERIK 840D Spindle speeds – infinitely variable: 5 – 10,000 rpm Drive power at 40% duty cycle: 38.00 kW Drive power at 100% duty cycle: 25.00 kW Torque at 40% / 100% duty cycle: 288 / 187 Nm Spindle taper: HSK 100 Feed rate X/Y/Z axes: 0 – 60,000 mm/min Rapid traverse X/Y/Z: 60.00 m/min Feed force X/Y/Z: 12.00 kN B-axis: 180 x 0.001° B-axis rapid traverse: 10.00 rpm Pallet size: 800 x 630 mm Table load capacity: 0.80 t C-axis: 360 x 0.001° Table rotation speed – infinitely variable: 1 – 800 rpm Table drive power: 13.85 kW Max. torque at face plate: 1,550 Nm Tool magazine: chain magazine, 60 places Tool diameter: 110 mm Tool diameter with 2 free adjacent positions: 230 mm Max. tool length: 450 mm Max. tool weight: 30.00 kg Total power consumption: 80.00 kW Machine weight approx.: 18.00 t Space requirement approx.: 7.50 x 5.50 x H3.50 m 5-axis machining center with SIEMENS Sinumerik 840D control, belt filtration system 980 l, chip conveyor, through-spindle coolant, extraction system, BLUM tool measurement, touch probe, operation mode 4, tool holder cleaning, hydraulic clamping with proportional valve.

Būklė: naudotas, Gamybos metai: 2003, Apdirbimo centras Deckel Maho DMU200P - Labai gera būklė Dedoxrgitspfx Afnscf - Galima tuoj pat - Eksportas visame pasaulyje Valdymas: Heidenhain iTNC530 Judėjimo ribos: X-2000 mm, Y-1800 mm, Z-1.100 mm Tvirtinimo paviršius: 1.700 mm x 1.400 mm Veleno sūkių dažnis: 12.000 aps./min. Veleno tvirtinimas: SK50 Įrankių sandėlis: 60 vietų Vidinė aušinimo skysčio tiekimo sistema (IKZ) ir drožlių šalinimo paketas: 40 bar Drožlių konvejeris: . Matavimo zondas: Heidenhain TS642 elektrinis rankinis ratukas: Heidenhain Darbo režimas: 4 Didelio greičio papildomas velenas: 42.000 aps./min. Įrankių matavimas: Blum lazeris

Gamybos metai: 2001, būklė: paruoštas naudoti (naudotas), Maks. pjovimo jėga: 220kN, lazerio galia: 3200W, azoto prijungimas: 30bar, deguonies prijungimas: 20bar, pajungimo galia: 76kVA, darbo valandų skaičius 2025 m. pradžioje: 67 766h, su Trumpf TLF 3200 lazeriu ir RIEDEL L 15/21 TR3/19.00 šaldytuvu, šaltnešis: R134a, užpildymo kiekis: 11,5kg, aukštas slėgis: 20,2bar. Papildomi įrankiai prieinami. Apžiūra vietoje galima. Dodpfxsw Uk A Rj Afnecf

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC Year of Manufacture: 2009, served as a demonstration machine until 2011, in production since 2012 The machine can be inspected under power by appointment. Condition: Very good (high precision), immediately available for operation. Spindle hours (as of August 1, 2025): 9,580 h The core of the machine is the integrated travelling column with turning-milling spindle and interpolating B axis. Machine base data: * Partial hollow chucking device (hydraulic) * C axis * Upper cross-slide with turning/milling spindle as motor spindle, with hydraulic clamping for turning operations, spindle interface: Capto C6 * Y axis: +/- 200 mm * B axis: +/- 120° * Tool disc magazine * Absolute, direct linear measurement systems in X, Y, Z1 axes * USB interface, Ethernet interface Dcodpfew Hg Nlox Afnjf TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3D path control TURN PLUS Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Spindle distance: 1,510 mm * Maximum bar diameter: 65 mm Main drive I: * Drive power (100% / 40% duty cycle): 24 / 34 kW * Speed range: up to 5,000 rpm * C axis speed: up to 5,000 rpm Turning-milling spindle: * Tool holder: Capto C6 * Spindle speed: up to 12,000 rpm * Drive power (100% / 40% duty cycle): 13.2 / 22 kW Tool magazine: * Number of tools: 36 * Machine dimensions (approx. W/D/H): 6,860 x 4,220 x 2,530 mm * Total weight of the machine (approx.): 18.5 t EQUIPMENT: Good equipment ... * No steady rest * Complete documentation available No guarantee for completeness or accuracy of technical information and equipment details. Detailed technical data sheet and further equipment information available on request.

Būklė: naudotas, Gamybos metai: 1982, Spindle diameter: 90 mm X-axis travel: 900 mm Y-axis travel: 900 mm Z-axis travel: 1200 mm W-axis travel: 800 mm Table clamping surface: 900 x 1200 mm Rotational movement: 360 degrees Table load capacity: 6.0 t Spindle speed: 25 – 1400 rpm Spindle taper: ISO 40 Power supply: 380 V / 50 Hz Milling spindle drive: 9.2 kW Total connected load: 35 kVA Machine weight: approx. 10 t Space requirement: approx. 4.5 x 2.8 x 2.5 m The machine was completely overhauled by the manufacturer in 1994, including: - new electrical cabinet - new BOSCH servo drives and Heidenhain TNC 360 control (3D control) Dcjdetv H Ucspfx Afnef - facing slide Ø 600 mm, travel: 150 mm The machine is currently not ready for demonstration due to an electrical fault.

Gamybos metai: 2019, veikimo valandos: 5 500 h, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, The system must be collected by 26/05/23 – placing a bid obligates the buyer to dismantle and collect the equipment within the specified timeframe. TECHNICAL DETAILS: Max. workpiece size: 1050 x 820 x 300 mm Max. workpiece weight: 1,000 kg Travel paths: 600 x 400 mm Wire diameter: 0.1 – 0.3 mm Dedek H D Hajpfx Afnjcf Machine weight: 3,000 kg Control system: Fanuc 31i –WB Installation dimensions: 2,440 x 2,680 mm Operating hours: 5,500 hrs.

Gamybos metai: 1979, būklė: naudotas, Press force 160 t Clearance between columns 850 mm Stroke 400 mm Ram area 800x700 mm Ejector stroke 300 mm Ejector force 20 t Table area 800x700 mm Total power requirement kW Machine weight approx. 12 t Dedpfx Aslp Uz Rsfnscf Space requirement approx. 1800x1800x4200 mm Sick BWS for safety and cycle operation Blow-off Ejector Mechanical fixed stop Stroke-pressure cut-off Pressure dwell time Approved for manual loading/unloading operations

Būklė: labai geros būklės (naudotas), FANUC Professional 6 valdymas su B ašimi Darbiniai eiga: 900 x 900 x 1020 mm Įrankių keitiklis su 136 pozicijomis Veleno apsisukimai: 10 000 aps./min Veleno tvirtinimas: HSK100 10 padėklų 630 x 630 mm Dcjdpfx Aex A E Enofnef B ašis 0,001° Padėklų keitiklis FASTEMS FPC1500 Vidinis veleno aušinimas 3D matavimo jutiklis Įrankio lūžio kontrolė Įrankio ilgio matavimo įranga Drožlių transporteris Įvairūs priedai MARCELS MASCHINEN AG

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 3 200 mm, Y ašies eiga: 1 200 mm, Z ašies eigos atstumas: 1 000 mm, stalo plotis: 1 000 mm, stalo ilgis: 3 500 mm, ZAYER lovinis frezavimo staklės geros darbinės būklės. Djdpfx Asw Uha Hjfnscf Specifikacijos: X ašis eiga: 3200 mm Y ašis eiga: 1200 mm Z ašis eiga: 1000 mm frezuojamos galvos tvirtinimas: ISO 50 valdiklis: Heidenhain TNC410 stalviršio matmenys: 3500x1000 mm gamybos metai: 1999

Būklė: naudotas, Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 730 mm, Y ašies eiga: 730 mm, Z ašies eigos atstumas: 850 mm, greitas poslinkis X ašimi: 50 000 m/min, greitas poslinkis Y ašis: 50 000 m/min, greitasis eiga Z ašyje: 50 000 m/min, nominali (akivaizdi) galia: 22 kVA, valdiklių gamintojas: MORI SEIKI, valdiklio modelis: MSX-711 IV, stalo apkrova: 500 kg, įrankių magazino lizdų skaičius: 60, įrankio ilgis: 500 mm, įrankio skersmuo: 140 mm, įrankio svoris: 12 g, Horizontal Machining Center MORI SEIKI NH-5000 DCG/40 The MORI SEIKI NH-5000 DCG/40 is a high-performance horizontal machining center, designed to deliver outstanding precision, reliability, and consistent productivity—even in the most demanding machining operations. Dcedpfx Aowxygzofnjf Key Features: Year of manufacture: 2010 CNC Control: Mori Seiki MSX-711 IV Machine weight: 12,700 kg Machine footprint (LxWxH): 4,628 x 4,952 x 3,012 mm Spindle: Spindle taper: ISO-40 Maximum speed: 14,000 rpm Spindle motor power: 18.5 / 22 kW (S1/S6) Working Capacity (axis travels): X-axis: 730 mm Y-axis: 730 mm Z-axis: 850 mm Spindle center – pallet surface distance: 100 – 830 mm Spindle nose – pallet center distance: 100 – 950 mm Max workpiece dimensions: Ø800 x 1,000 mm Rotary Table: Dimensions: 500 x 500 mm Number of stations: 2 (with automatic pallet changer) Maximum load per pallet: 500 kg Table continuous rotation: 360,000 positions Feed Rates: Rapid traverse (X/Y/Z): 50,000 mm/min Working feed rates (X/Y/Z): 1 – 50,000 mm/min Tool Changer: Tool taper: MAS BT-40 Shank: 90° Mori Seiki type Tool magazine capacity: 60 positions Maximum tool diameter: Ø140 mm (without adjacent tools: Ø70 mm) Maximum tool length: 500 mm Maximum tool weight: 12 kg Equipment and Accessories: Chip conveyor Coolant collection tank with washing pumps + external tank with paper filter High-pressure coolant pump through spindle line Spindle head chilling unit and transformer Retractable tool presetter sensor Complete technical documentation (manuals, electrical diagrams, CE declaration) Ideal for advanced machine shops and high-volume production, the NH-5000 DCG/40 combines structural rigidity and advanced CNC technology, ensuring rapid, precise, and complex machining operations.