Dionex HPLC sistema

Dionex

Sąlyga: naudotas, Dionex / ThermoFisher FLM: Temperature range: 5–70 °C (maximum 15 °C below ambient temperature) Temperature accuracy: ±0.5 °C Lredpfxsxtb Efs Af Isg Temperature stability: ±0.1 °C Temperature precision: ±0.1 °C Column capacity: Up to 3 columns, max. 30 cm length Heating time: From 20 to 50 °C in less than 25 min (at 23 °C ambient temperature, ±0.5 °C) Cooling time: From 50 to 20 °C in less than 35 min (at 23 °C ambient temperature, ±0.5 °C) Control: All functions software-controlled via USB 1.1 I/O Interfaces: 2 digital inputs, 2 programmable relay outputs Column identification: Electronic identification system for 3 columns Switching valves: 1 or 2 thermostatted microvalves with low dispersion (10 ports or 6 ports) Flow distributor: Nano, capillary, or thermostatted micro flow distributor with flow distributor identification system Flow control: Electronically controlled and actively balanced flow splitter, independent of solvent composition and back pressure Column flow rate range: 50 nL/min to 2.5 mL/min using a predefined splitter and active flow control Flow rate selection range: 50 nL/min to 1000 nL/min (using a nano-LC splitter) 0.5 μL/min to 10 μL/min (with a capillary-LC splitter) 10 μL/min to 160 μL/min (with a micro-LC splitter) Gradient delay time: Typically < 1.5 min at 200 nL/min at splitter outlet Max. column pressure: 35 MPa (4900 psi) Wetted parts: Quartz glass, stainless steel (1.4571, 316L), PEEK; Outlet tubing: PTFE, aluminum oxide (Al2O3) Safety features: Moisture sensor, gas sensor, and leakage sensor for the flow control valve VWD Optical design: Double beam photometer (monochromator) Multi-wavelength UV/VIS detector Light source: VWD-3400RS: Deuterium lamp and tungsten lamp Temperature control for both lamps Wavelength range: 190 to 900 nm Tungsten lamp recommended for wavelengths > 600 nm. Noise: At one wavelength:

Sąlyga: labai geros būklės (naudotas), Here we offer an ICS system. Flow rate range: 0.000 to 10.000 ml/min (analytical); 0.000 to 3.000 ml/min (capillary) Lrodpfxjhh Ibte Af Isg Flow rate accuracy: < 0.1% Flow rate precision: < 0.1% Accuracy and precision of gradient dosing: ±0.5% at 2 ml/min (analytical only) Pressure range: 0 to 35 MPa (0 to 5,000 psi) (analytical); 0 to 41 MPa (0 to 6,000 psi) (capillary) Dimensions (H x W x D): 14 x 8.25 x 19 in. (36 x 21 x 48 cm) Weight: 24.1 kg (55 lb.) (ICS-5000) Power supply: 9 to 265 V AC, 47 to 63 Hz The system consists of the following components: - ICS-5000 plus Dual Pump - 6-port valve MXP9900-000 - AFC-3000 Automated Fraction Collector - RFC-10 Controller Condition: used Scope of delivery: (See images as shown) (Technical specifications are subject to change and errors excepted!) If you have any further questions, we are happy to assist you by phone.

Sąlyga: paruoštas naudoti (naudotas), Der Thermo Scientific Dionex ICS-Series VWD ist ein hochentwickelter variabler Wellenlängendetektor, der für die präzise und exakte Erkennung von Analyten in komplexen Proben entwickelt wurde. Das Gerät ist ein essenzieller Bestandteil des Dionex ICS-Series Chromatographiesystems und wird in vielfältigen Bereichen eingesetzt, darunter Forschung und Entwicklung in der Pharmaindustrie, Umweltüberwachung, Lebensmittel- und Getränketests und mehr. Der Detektor verfügt über eine hochmoderne Flusszelle, die ausgezeichnete Signal-Rausch-Verhältnisse gewährleistet und somit herausragende Empfindlichkeit und Selektivität auch bei anspruchsvollen Trennungen bietet. Die Flusszelle ist zudem so konstruiert, dass Dispersion und Bandenverbreiterung minimiert werden – für eine hohe Auflösung und präzise Peak-Erfassung. Lrjdpfx Afjxnm Rvs Ieg Der Thermo Scientific Dionex ICS-Series VWD Detektor bietet einen variablen Wellenlängenbereich von 190 bis 900 nm, wodurch eine breite Palette von Analyten detektiert werden kann. Zusätzlich ermöglichen die High-Speed-Scan-Fähigkeiten eine schnelle Datenerfassung und -auswertung, was das Gerät besonders für hochdurchsatzorientierte Anwendungen prädestiniert. Guter, funktionsfähiger Zustand. Bitte sehen Sie sich auch unsere weiteren Angebote an.

Gamybos metai: 2015, veikimo valandos: 10 h, Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: SN 15101588 SP 082988, Automatic Sample Extractor Thermo Scientific Dionex ASE 350 for High-Efficiency Extraction of Solid Samples under High Pressure and Elevated Temperature The Thermo Scientific Dionex automatic sample extractor, model ASE 350, is equipped with a carousel for 24 extraction cells with volumes ranging from 1 to 100 ml, a carousel for collection containers with volumes of 60 ml and 250 ml, and a solvent management module. Additional equipment included with the extractor: - Extraction cells with a volume of 22 ml – 6 pieces - Solvent bottles with a volume of 2 L – 2 pieces - Bottle adapters with caps – 2 pieces Purchase date: December 2015 The ASE 350 system is a fast extractor that simplifies workflow for almost any application requiring extraction from soil, sediments, or plant or animal material. 1. The extractor weighs 65 kg. A suitably stable laboratory table is required. 2. The ASE 350 extractor is powered by 230 V, 50 Hz. A 16 A fuse is required. 3. For proper operation, the extractor requires nitrogen of 99.99% purity. The regulator should allow the output gas pressure to be set within the range of 1.03–1.38 MPa. Lrsdpfowm Arisx Af Isg 4. Optionally, in addition to nitrogen, compressed air can also be used to supply the device’s pneumatic system. The air should be 99.99% pure. The air supply must allow for an adjustable output pressure within the range of 0.4 MPa to 0.8 MPa. NOTE: AIR DOES NOT REPLACE NITROGEN, WHICH IS ESSENTIAL; AIR MAY BE REPLACED BY NITROGEN. 5. Dimensions: 750 x 600 x 700 mm (width x depth x height).