Stulpo strėlės kranas

DEMAG

Sąlyga: naudotas, Gamybos metai: 2004, spaudimo jėga: 110 kN, darbinio tūrio: 2 926 cm³, įpurškimo slėgis: 1 600 juosta, bendras svoris: 5 650 kg, sraigtinio konvejerio skersmuo: 45 mm, Pristatymo sąlygos: iš vietos Redoymqz Rspfx Agisp Pristatymo laikas: pagal susitarimą Apmokėjimo sąlygos: 100% apmokėjimas prieš perimant įrenginį, grynoji suma

Sąlyga: naudotas, Gamybos metai: 2007, x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm Control: Sinumerik 840 D Siemens Maximum clearance between columns: 3,000 mm Maximum clearance height: 1,950 mm Maximum distance from spindle center to table: 1,800 mm Distance spindle nose to table: 1,350 / 1,500 mm Type P 8005020/00-4 Main spindle speed range: up to 18,000 rpm Main spindle drive power: 20 kW Max. torque: 48 Nm Tool holder: HSK-A63 DIN 69063 Spindle extension: 450 mm Swiveling B-axis: +110° / -10° Rotating C-axis: +/- 200° Type P 8002320/00-4 Main spindle speed range: 20 - 5,000 rpm Main spindle drive power: 40 kW Max. torque: 1,100 Nm Tool holder: HSK-A100 DIN 69063 Rsdpfevy Ihdsx Agiep Spindle extension: 300 mm Swiveling B-axis: +110° / -10° Rotating C-axis: +/- 200° Table clamping surface: 4,000 x 2,200 mm (2x) Max. table load: 12 / 20 t Height above floor: 700 mm Number of T-slots: 11 + 19 T-slot width: 28H7 mm T-slot spacing: 200 mm Number of tool positions: 327 pcs. Number of tool positions HSK A63: 156 pcs. Number of tool positions HSK A100: 171 pcs. Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 / 500 mm Max. tool weight HSK A63: 5.0 kg Max. tool diameter HSK A100: 315 mm Max. tool length HSK A100: 500 / 800 mm Max. tool weight HSK A100: 40.0 kg Feed rate X: max. 30,000 mm/min Feed rate Y/Z: max. 40,000 mm/min Feed rate B: 3,600 °/min Feed rate C: 2,160 °/min Acceleration X: max. 1.5 m/s² Acceleration Y/Z: max. 3.2 m/s² x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm b-axis +110° / -10° c-axis +/- 200° Total connected load: 150 kVA Space requirement approx. 25.0 x 12.0 x 7.0 m 5-Axis Gantry Large Machining Center DROOP + REIN - TFS 22 40 DT D40 P - Two milling heads - approx. 4,000 operating hours - X-axis 10,000 mm (coupled) / 2x 5,000 mm (single table) - 3 simultaneous axes (X, Y, Z) - 2 positioning axes (B, C) - Tools subject to agreement

Sąlyga: naudotas, Gamybos metai: 2005, spaudimo jėga: 110 kN, darbinio tūrio: 2 926 cm³, įpurškimo slėgis: 1 600 juosta, bendras svoris: 5 650 kg, sraigtinio konvejerio skersmuo: 45 mm, Pristatymo sąlygos: iš vietos Pristatymo laikas: pagal susitarimą Rsdpfoymqz Dex Agijp Apmokėjimo sąlygos: 100% apmokėjimas prieš perimant įrenginį, grynoji suma

Sąlyga: naudotas, Gamybos metai: 2005, spaudimo jėga: 110 kN, darbinio tūrio: 398 cm³, įpurškimo slėgis: 1 550 juosta, bendras svoris: 5 700 kg, sraigtinio konvejerio skersmuo: 50 mm, Pristatymo sąlygos: iš vietos Rsdpjymqzqofx Agijp Pristatymo laikas: pagal susitarimą Apmokėjimo sąlygos: 100% apmokėjimas prieš perimant įrenginį, grynoji suma

Gamybos metai: 1998, Sąlyga: beveik kaip naujas (naudotas), Laser type: Q-switched pulsed solid-state laser Laser medium: Nd:YAG Wavelength: 1064 nm Beam diameter: approx. 1.2 - 1.3 mm after output coupling mirror at TEM00 Beam divergence: 5 mrad multimode, 2 mrad TEM00 Pulse duration (time): CW / 90 ns Max. output power: 65 W (130 W optional) in multimode, 16 W in single mode Pulse energy: 16 mJ (30 mJ optional) at 3 kHz Operating modes: CW, Q-switched from 0.1 to 100 kHz Redsd Dhw Nopfx Agijp Beam deflection system: Galvanometer system Line width in mixed mode: approx. 0.12 mm

Sąlyga: naudotas, Gamybos metai: 2005, spaudimo jėga: 110 kN, darbinio tūrio: 398 cm³, įpurškimo slėgis: 1 550 juosta, bendras svoris: 5 700 kg, sraigtinio konvejerio skersmuo: 50 mm, Pristatymo sąlygos: iš vietos Pristatymo laikas: pagal susitarimą Rodsymqzkjpfx Agiep Apmokėjimo sąlygos: 100% apmokėjimas prieš perimant įrenginį, grynoji suma

Sąlyga: naudotas, Gamybos metai: 2006, Load capacity 500 kg Outreach 4,000 mm Base plate 0.7 x 0.7 m Space requirement approx. 4.1 x 0.7 x 5.1 m Crane system DEMAG - DC-COM 1/1 H5 Rodpfx Agou Hq Rreiop

Sąlyga: naujas, Funkcionalumas: visiškai funkcionalus, kuro tipas: elektrinis, bendras svoris: 2 500 kg, didžiausias leistinas svoris: 2 500 kg, stiebo tipas: teleskopinis, Self-propelled battery-powered crane from the renowned Italian company JMG, model MC25S, equipped with radio control and a lifting capacity of 2,500 kg. The machine is brand new and ready for inspection. Distributor-provided, 12-month warranty. CRANE CLASSIFICATION ACCORDING TO UNI ISO 4301-1: A3 EUROPEAN DIRECTIVES: 2006/42/EC (Machinery Directive) 2004/108/EC (EMC) 2006/95/EC (Low Voltage Directive) 2000/14/EC and subsequent amendments. REFERENCE STANDARDS: EN 13000:2010 UNI ISO 4301-2:2011 and subsequent amendments. Redpjwtppzefx Agiop WHEEL DRIVE: Electric BOOM DRIVE: Hydraulic POWER SUPPLY: Electric battery MAX. LIFTING CAPACITY: 2,500 kg CRANE WEIGHT: 2,500 kg BOOM UPLIFT ANGLE: 60° BOOM DOWNWARD ANGLE: -15° FRAME: Designed and manufactured by JMG. Box-section, torsion-resistant structure made from high-strength structural steel. BOOM: Made of high-quality steel sheet, formed and welded. Consists of a base section, hydraulic telescopic system, and one mechanical extension. Boom tilting and extension are hydraulically actuated via telescopic cylinders. TRAVEL MOTOR: 2x 2 kW electric motors, 24 V AC, insulation class H PUMP MOTOR: 3 kW electric motor, 24 V DC, insulation class H DRIVE CONTROL: Electronic speed control, MOSFET type BATTERY: 24 V 420 Ah, with charge indicator DRIVE TRANSMISSION: Front axle driven via 2 gearboxes WHEELS: Front: superelastic, 18x7-8", 2 pcs. Rear: superelastic, 15x4 1/2-8", 2 pcs. BRAKES: Automatic on front wheels STEERING: Rear-wheel steering via electric motor. Max. steering angle: ±90° CONTROL: Operated via radio remote control HYDRAULIC SYSTEM: Powered by a silenced 3 kW gear pump. Cylinders controlled by electro-proportional valve block with radio remote control. Filter and safety valve included. Max. operating pressure: 22 MPa. SAFETY FEATURES: Electronic load moment indicator and limiter STANDARD CRANE EQUIPMENT: • Max lifting capacity 2.5 t • Front wheel drive via 2 reducers (one per wheel) • Hydraulically extendable telescopic boom (1 fixed, 2 telescoping sections) • Manual mechanical jib extension • 24 V 420 Ah battery pack • Stationary battery charger • Work lights • Warning beacon • Fire extinguisher • Radio control for boom and travel wheels • Electronic load indicator and limiter, CE compliant • Boom tilt angle +60° / -15° • CE declaration of conformity • User manual, technical documentation, certifications INSTALLED OPTIONAL EQUIPMENT: • 2.5 t hydraulic winch • Non-marking tyres • Battery water refill system • Onboard mobile charger • Manual 3-position fly jib, 1.0 t

Sąlyga: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 1999, mašinos/transporto priemonės numeris: FI127/3, 1 Demag KBK I sieninis sukamasis kranas, naudingoji apkrova / keliamoji galia 125 kg Išsikišimas 4 m, naudingoji apkrova 125 kg Su Abus GM grandininiu keltuvu, naudingoji apkrova 125 kg Svoris su sienine konsole apie 200 kg Komplekte yra grandininis keltuvas, kabelio vežimėlis, važiuoklė ir smulkūs priedai Sukimosi kampas 270° Prekės vieta: 75053 Gondelsheim Įranga pilnai išardyta ir nedelsiant prieinama Redpfxjynv Hhj Agijp Siuntimas per transporto įmonę arba atsiėmimas Siuntimo išlaidas teiraukitės pagal pašto kodą.

Sąlyga: paruoštas naudoti (naudotas), rankos keliamoji galia 125 kg, ilgis 310 cm Rsdsynitujpfx Agisp grandinė keltuvas su pultu, keliamoji galia 125 kg, 2006 m. siurbtukas, keliamoji galia 250 kg, 2009 m. pado ilgis 300 cm

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2002, Speed: 4500 rpm, max. drum diameter: 300mm/167mm, solids: 2.6kg/dm³, material temperature min./max.: 5°C/100°C, bowl dimensions X/Y: 300mm/1200mm, machine material: stainless steel, operating hours: 62,293 h. Spare parts included. On-site inspection possible. Rjdpfx Aju Av H Degijp

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, spaudimo jėga: 500 kN, varžto skersmuo: 22 mm, tarpas tarp stulpų: 355 mm, darbinio tūrio: 41 cm³, įpurškimo slėgis: 2 800 juosta, formos aukštis (min.): 210 mm, Uždarymo jėga: 50 t Gamybos metai: 2006 Įpurškimo mazgas .../200 Redpjynhrcefx Agisp Sraigto skersmuo: 22 mm Specifinis įpurškimo slėgis: 2800 bar Įpurškimo tūris: 41,8 cm³ Įrankio uždarymo sistema 50/... Uždarymo jėga: 50 t Įrankio plokščių matmenys: 520 x 520 mm Atstumas tarp stulpelių: 355 x 355 mm Įrankio aukštis: 210 mm Atidarymo eiga: 400 mm Maksimalus atstumas tarp plokščių: 610 mm Svoris: 2700 kg Matmenys (I x P x A): 3,8 x 1,1 x 2,1 m Valdymas: NC4

Sąlyga: naudotas, Suspended Crane Runway Crane System DEMAG Type KBK 1 Year of manufacture: approx. 2000 Single-rail suspension track with single-girder bridge crane Light crane system made from KBK modular system profiles Lifting capacity: 125 kg Span: 5 meters Distance between longitudinal tracks: 4.1 meters Total length of longitudinal girder: 12 meters Crossbeam profile = KBK1 Longitudinal track profile = KBK1 Comprising: 29 meters of KBK-1 system profile (4 x 6000 mm + 1 x 5000 mm) 1 trolley for crane suspension 2 double trolleys for the longitudinal tracks 10 clamp brackets for crane suspension or ceiling mounting (without girder clamps) Rjdpohrkrtefx Agijp 6 end caps suitable for KBK1 running rails

Sąlyga: paruoštas naudoti (naudotas), Parduodu konvejerį, matomą nuotraukose, ilgis apie 7,5 m. Juostos plotis 0,3 m. Galimas transportavimas. Redpfjr Nvx Ujx Agisp

Sąlyga: naudotas, Overhead crane runway crane system made of aluminium system profiles similar to GIS GISKB ALU, EEPOS, KITO ProSystem, ERIKKILA Not DEMAG, but similar to KBK Double-rail suspension track with single-girder crane bridge Lightweight crane system made of aluminium system profiles Lifting capacity: 125 kg Span: 3.2 metres as a single-girder bridge Profile height: 155 mm Profile width: 100 mm - Profiles: natural-coloured anodised aluminium - Trolleys with smooth-running polymer rollers - Power supply via festoon cable on wire rope Comprises: 2 pieces of 4.8 metre aluminium system profiles for the long travel rail, each with 3 suspension eyes 1 piece of 3.35 metre aluminium system profile for the cross traverse (single-girder bridge) with 2 suspension eyes 1 trolley for crane suspension on the cross traverse 1 trolley for the long travel rail (2 pieces) 6 end caps matching the profile rails Weight of profile rails: 125 kg Very good condition, as new condition Redpfx Agjuch Rfeiep You will find lifting equipment in our webshop under the search term "chain hoist". Suitable mounting material can be found in our webshop under the search term "KBK".