Sieninis pasukamas strėlinis kranas Pasukamas strėlinis kranas Grandininis keltuvas

Demag KBK Kran Drehkran Hallenkran 3m Demag KBK2 125 Kg + Stahl Kettenzug

Sąlyga: naujas, Gamybos metai: 2025, Maximum pressure: 40 tons Stroke length: 250 mm Maximum speed: 10 mm/sec Return speed: 20 mm/sec Worktable: 660x1250 mm Working height: 900 mm Oil tank: 60 liters Maximum workpiece height: 5 mm Flat capacity: 200x26 mm Tube capacity: 60x5.0 mm *not with standard tools - Digital limitation of stroke and return stroke. - NC control system. Nkedpfx Agjhgihkeiou - Adjustable hydraulic pressure - Adjustable bending speed - Fully enclosed table - The ZOPF design enables rapid tool changes without loss of accuracy. - The hydraulic cylinder is mounted on the heavy-duty machine table, ensuring no loss of precision even under high loads. - The universal tool holder with various tools allows for highly flexible operation.

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2006, veikimo valandos: 47 000 h, lazerio galia: 2 000 W, perforavimo jėga: 76 t, ruošinio svoris (maks.): 120 kg, darbo diapazonas: 2 500 mm, Įranga: apsaugos šviesos užtvara, aušinimo blokas, Special Equipment: + Thread forming function with thread former break detection + MultiTool function + Marking/Fast deep-drawing function + Secondary forming cylinder + Sensor for part chute Standard Equipment: - Robust C-frame - Coordinate guide with integrated linear magazine - 21 tool and clamp locations - 2 clamps - Drives: maintenance-free three-phase servo motors - Brush tables - Laser TCF1 (2000W) - HI-LAS high-pressure cutting - Rapid processing with SprintLas - Programmable cutting gas selection/pressure adjustment - Laser cutting head with 5" lens - Quick-change device for cutting head - APC capacitive height control Nedpfx Agewcq Hgoieku - Lens monitoring sensors - Laser logbook function - Compact dust extractor - Rotatable tool holder - Automatic repositioning device with hold-down - Automatic part chute for parts up to 300x500 mm - Automatic tool changer with 19 stations - 2 clamps - Good part container - Punch spray lubrication - Second lubricant container - Punch slug extraction - Chip bin - Hydraulic quick shut-off - External control panel - 15" TFT touch color display - USB stick interface - 3.5" floppy disk drive - Safety features - RJ45 network port - Network connectivity - Comprehensive operating manual - Remote diagnostics unit

Sąlyga: geras (naudotas), Gamybos metai: 1996, Robotas Kuka KR200-1A Nodoc Nyxhspfx Agijku Pagaminimo metai: 1996 Darbinis nuotolis: 2400 mm Svoris: 1125 kg Keliamoji galia: 200 kg Žarnų paketas Valdymo sistema: VKRC1 Valdymo svoris: 136 kg Programinės įrangos versija: V4.1.7 (standartinė Kuka) Valdymo pultas (teachpendant): Kuka KCP1 Kabelių komplektas: 7 m/15 m 24226ä

Sąlyga: naudotas, Gamybos metai: 2001, Technical details: Tube diameter: 74 mm Wall thickness: 5 mm Minimum tube diameter: 10 mm Maximum tube diameter: 74 mm Round material (steel) max.: 40 mm Control system: Trumpf Tube Technology IsoBend 2.0 Maximum bending radius: max. 300 / min. 65 mm Maximum bending angle: max. 195° / min. 0.1° Bending speed: (°/s): 90 / (°/s²): 190 °/s Tube loader length: 3000 mm Hydraulic working pressure, max.: 300 bar Total power requirement: 43 kVA Nkjdpfju Ibvhjx Agiju Machine weight approx.: 8.5 t Machine dimensions LxWxH approx.: 6.5 x 1.6 x 1.6 m Control panel dimensions LxWxH: 0.8 x 0.6 x 1.4 m This is a multi-radius tube bending machine with bending head and swivel arm (cold bending machine). Application: Suitable only for processing tubes, round bars, and wires made from steel, stainless steel, and non-ferrous metals. Thanks to the cross-slide of the bending head, the following advantages are provided: - Freely programmable X and Y axes - Cross-slide level change: Travel path = 300 mm (vertical position freely programmable) and max. horizontal movement 350 mm - Bending dies of different sizes within a die stack can be approached at will. Bending direction: right Control software: Trumpf Tube Technology IsoBend 2.0 Hydraulic unit with high-pressure multi-flow pump Mandrel retraction unit Sliding rail (max. speed 362 mm/sec and max. acceleration 1100 mm/sec) In good condition. *

Sąlyga: geras (naudotas), Plasma cutting device, plasma cutter for plasma cutting systems - Manufacturer: Hypertherm Nkedowd Tg Sjpfx Agiju - Model: HySpeed HT2000LHF - Equipment: includes torch assembly and cutting nozzle head - Maximum cutting current: 200 A - Dimensions: 1100/720/H1040 mm - Weight: 459 kg

Sąlyga: naudotas, Gamybos metai: 2010, Column-mounted slewing crane: mobile Jib length approx. 2,500 mm Machine weight approx. 4 t Nkodpfx Ajmt Rpwegisu Load capacity 125 kg Bucket dead weight 430 kg Minimum bucket fill weight 416 kg Minimum total bucket weight 846 kg Max. wheel load 391 kg Max. support load 544 kg Without documentation/papers.

Sąlyga: naujas, Sheet thickness 1.2 mm Roll diameter 62 mm Throat depth 100 mm Total power requirement 0.75 kW Machine weight approx. 130 kg Space requirement approx. 1.1 x 0.5 x 1.3 m Machine is equipped with: - Emergency stop switch Nkjdofv H Edepfx Agieu - Foot switch - 7 sets of rollers

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1999, nice veneer saw with planer unit Njdpfoq Rb Irjx Agijku cutting length 3100 mm with rear stop

Sąlyga: geras (naudotas), Gamybos metai: 1996, Tube diameter: 6 - 28 mm Wall thickness: 2 mm Min. bending radius: 2 x D Control system: IPU 20 Max. bending radius: 5.0 x D mm Max. bending angle: 190° Mandrel length: 3000 mm Operating pressure: 180 bar Nedpfx Ajvtgn Nsgisku Hydraulic motor: 4 kW Machine weight: approx. 900 kg Space requirement: approx. 3.8 x 1.1 x 1.3 m Semi-automatic electro-hydraulic mandrel tube bending machine with PLC control for 20 bending angles and a display unit in the control panel for angle presetting, angle detection, and angle measurement via absolute value rotary encoder, automatic tool plate reset, rotation device with digital readout, hydraulic quick-action chuck, automatic mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: Hydraulics on/off, mode selection, clamp open/close, feed forward/backward, mandrel forward/backward, bend forward/backward, lock forward/backward, mandrel lubrication, rotation device forward/backward, tool plate reset, length stop forward, emergency stop. The machine comes from prototype construction and has seen very little use until 2000. After that, the machines from this department were sold. The buyer, however, did not use the tube bending machine, which has since only been stored and not operated (original paintwork). Machine offered at a special low price! This is a used machine; therefore, we sell under exclusion of any warranty. Stockholding dealer with 1,600 m² showroom.

Sąlyga: naujas, Gamybos metai: 2023, Rotator for containers, welding positioner, welding turntable, roller stand 1000 kg load capacity Nodpfxjgu Edvo Agisku Adjustable distance and rollers With foot remote control Continuously adjustable speed from 80 to 1600 mm/min. Suitable for diameters from 20 mm to 700 mm