Plunksna šlifavimo staklės

DECKEL SOE

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1984, Cutter Grinder Manufacturer: Deckel Model: S0E Year of manufacture: 1984 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey Machine no.: 84-5532 with warranty Accessories: - Machine stand - Microscope with mount - Integrated dust extraction - Grinding wheel with flange - Dressing tool - Operating manual Ndodpfx Aeqctp Sepnoc Including installation of an on/off switch with undervoltage release for implementing restart protection for example, in case of power failure or plug disconnection including fabrication of a mounting adapter plate - Used, as seen -

Būklė: naudotas, TECHNICAL DATA - Number of Axes: 7 MILLING SPINDLE - Tool Holder: HSK40 - Spindle Speed: 30,000 rpm LINEAR AXES - Travel X/Y/Z axes: 450/270/310 mm - Rapid Traverse Speed (X/Y/Z): 75 m/min Njdpfx Asuhbr Tepnsdc SWIVEL AXIS B - Travel Range: -20/+90 degrees - Minimum Resolution: 0.001 degrees TOOL CHANGER - Tool Changer Type: Parapluie (umbrella type) - Magazine Capacity: 40 tools TURNING SPINDLE - Spindle Speed: 8,000 rpm - Max. Bar Diameter: 32 mm - Minimum Resolution C-axis: 0.001 degrees - Travel Range: 360 degrees ELECTRICAL SUPPLY - Supply Voltage: 400 V WEIGHT AND DIMENSIONS - Footprint: 1500 x 2600 mm - Machine Height: 2300 mm - Machine Weight: 2850 kg OPERATING HOURS EQUIPMENT - Control System: Siemens 840 D - 3-color Status Light

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1986, Engraving Cutter Grinder Make: Deckel Model: S0E Year of manufacture: 1986 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey Machine No.: 86-5751 with warranty Accessories: - Machine stand - Integrated dust extraction - Grinding wheel with flange Nedjqctniopfx Apnodc - Dressing tool - Operating instructions Including installation of an ON/OFF switch with undervoltage release to provide restart protection, e.g. in case of power failure or mains plug removal including production of a mounting adapter plate Used, as seen The machine is technically in accordance with the state of the art at the time of manufacture.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1988, Cutter Grinder Make: Deckel Model: S0E Year of manufacture: 1988 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey Machine no.: 88-6730 Warranty: 12 months single shift from delivery For machines located outside of our North Bavarian sales region, travel costs are to be covered by the customer. Accessories: - Machine stand - Integrated dust extraction system - Grinding wheel with flange - Dressing tool - Operating manual Including installation of an on/off switch with undervoltage release for re-start protection implementation, e.g., in case of power failure or unplugging including manufacture of a mounting adapter plate Used, as inspected The machine is technically to the standard of its year of manufacture. Njdpolxpfmefx Apnsdc

Būklė: naudotas, Gamybos metai: 2017, mašinos/transporto priemonės numeris: STA00197, XYZ CT52, 2 ašių CNC tekinimo staklių modelis, su tiesiniais kreiptuvais „Siemens 828D“ CNC valdymo sistema Maksimalus apdirbamo gaminio skersmuo virš staklių lovio – 400 mm Maksimalus apdirbimo skersmuo – 200 mm X ašies eiga – 115 mm Z ašies eiga – 290 mm Veleno greitis – 5000 aps./min. Veleno skersmuo – 61 mm Maksimalus apdirbamo strypo skersmuo – 52 mm 12 padėčių VD130 stovo galvutė Atraminio galo eiga – 90 mm Greitasis judėjimas – 20 m/min (X ir Z ašys) Pjovimo greitis – 10 m/min (X ir Z ašys) Staklių svoris – 2500 kg Staklių matmenys – 1700 x 1240 mm Pagaminta 2017 m. Staklių komplektacija: 3 žandikaulių tvirtinimo įtaisas su pneumatiniu užspaudimu Įrankių nustatymo zondas Dalelių surinktuvas Drožlių konvejeris Automatinė tepimo sistema Didelio stiprumo apšvietimas Įrankių dėžė Ndsdpfx Apjzkbironoc Parduoda „Jet Machinery Ltd“ „Jet Machinery“ sandėlio numeris: 79265 Staklių serijos numeris: STA00197 29 950,00 £ + PVM Nors buvo dedamos visos pastangos, kad aukščiau pateikta informacija būtų tiksli, tikslumas negarantuojamas. Rekomenduojame būsimiems pirkėjams patikrinti visus svarbius duomenis. Darbo saugos ir sveikatos įstatymas (1974 m.): Nors esame tiekėjai, nėra pagrindo manyti, kad galime užtikrinti, kad mūsų produktai atitiktų šio įstatymo reikalavimus jūsų konkrečios paskirties atžvilgiu, ypač kalbant apie apsaugines priemones. Rekomenduojame būsimiems pirkėjams pasikonsultuoti su apsaugos priemonių specialistu, kuris prieš naudojant patikrintų produktus.

Būklė: labai geros būklės (naudotas), Special accessories for DECKEL SO + SOE cutter grinders: - 1 very well-preserved special arbor for milling cutters o For grinding end mills with diameters 16 – 25 mm and with Morse taper shanks MK 1, MK 2, and MK 3 o Milling cutters with clamping shank Ø 25 mm can be directly mounted o Maximum through bore: 25 mm Price: €950.00 net - As-new collets for special milling cutter arbor: - 1 set of collets for special arbor, internal diameter Ø 16, 18, and 20 mm, price: €129.00/each net - 1 set of collets for special arbor, internal square □ 8, 10, and 12 mm, price: €145.00/each net - 1 set of Morse taper adapters MK 1, MK 2, and MK 3, price: €245.00/each net - As-new cup grinding wheel Ø 80 mm, price: €40.00/each net - 1 brand new knurled nut for tightening collets with saw thread S 20 x 2, price: €99.00 + €12.80 shipping net All prices listed above are net prices plus statutory VAT. Siegfried Volz Werkzeugmaschinen Njdpfxjctyh Uj Apnjdc Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Būklė: naudotas, mašinos/transporto priemonės numeris: 91-7529, su apšvietimu, skirtu apžiūrėti įrenginius Nodpfoz Nhmasx Apnodc

Būklė: geras (naudotas), 3 screw vises "GOODY" Ndjdpfx Aerai Akopnec

Būklė: naudotas, Schleifmaschine für Bohrer DECKEL SOE Spindeldrehzahl: 4.500 U/min Max. Spannbereich der Spannzangen: 17,5 mm Max. anschleifbarer Radius: 10 mm Max. seitlicher Verstellweg: 10 mm Winkeleinstellung: 45° Max. Verfahrweg: 100 mm (siehe technische Details) Nedez H Iwfepfx Apnjdc Geliefert mit 1 Satz Spannzangen und diversen Diamantschleifscheiben Spannung: 380 V Breite: 600 mm Tiefe: 600 mm Gesamthöhe: 1.300 mm Gewicht: ca. 150 kg

Būklė: geras (naudotas), Gamybos metai: 1977, Funkcionalumas: visiškai funkcionalus, Deckel S0E Cutter Grinder with Accessories Technical Data: >> Machine No.: SOE 77-3997 Year of manufacture: 1977 >> Drive motor speed: 2800 rpm >> Grinding spindle speed: 4500 rpm >> Drive power: 0.55 kW / 380 Volt >> Weight: approx. 200 kg Accessories and Equipment: >> Collets >> Grinding wheels >> Machine stand / base >> Dressing device >> Tools >> Grinding dust extraction unit About the Machine: Offered is a Deckel SOE cutter grinder with accessories. Mechanically and electrically tested. A tidy and fully functional machine. Take advantage of the opportunity to inspect and test this machine under power at our premises. Nsdpewrm Nvsfx Apnjdc

Būklė: geras (naudotas), NHH Lathe Model: 1N611N Swing over bed: 260 mm Swing over cross slide: 160 mm Spindle bore: 26 mm Turning length: 600 mm Njdpfxoqgdkij Apnodc Digital readout Chuck diameter: 155 mm Spindle speed: 2000 rpm Dimensions: 150x85x155 cm (LxWxH)

Būklė: geras (naudotas), Gamybos metai: 1995, „Deckel SOE“ – staklių galandimo staklės, pagamintos 1995 m. Komplektacija: įtvarai, įvairūs šlifavimo diskai. Gera, veikianti būklė. Nedozx Rwuspfx Apnjdc

Būklė: labai geros būklės (naudotas), Graviravimo frezų galąstuvas, šlifavimo staklės, kampinis šlifuoklis, tekinimo peilių galąstuvas, srieginių grąžtų šlifuoklis, frezų galąstuvas, plokščio šlifavimo staklės, grąžtų galąstuvas, šlifavimo stalas, dvigubas šlifavimo stalas, įrankių galąstuvas Nedpfx Apsy Ifc Tjnodc - Gamintojas: Deckel įrankių galąstuvas, tipas SOE - Tvirtinimo gnybtų kiekis: 48 vnt - Variklio galia: 0,55 kW - Apsisukimų dažnis: 2800 aps./min - Šlifavimo diskų diametras: Ø 100 mm - Šlifavimo ilgis: 90 mm - Didžiausias galimas šlifuoti kampas: 180° - Didžiausias galimas šlifuoti spindulys: 10 mm - Stambi eiga: 100 mm - Precizinė eiga: 15 mm - Dalgalvos laikiklio pasukamumas: 90° - Dalgalvos stumoklio precizinė eiga: 12 mm - Vamzdžio vedimo centro aukštis iki šlifavimo veleno centro: 140 mm - Matmenys: 430/530/H1200 mm - Svoris: 131 kg

Būklė: naujas, Turning diameter: 400 mm Turning length: 1,000 mm Speed range: 70 - 2,000 rpm Weight approx.: 500 kg Description: - Lead and feed screw lathe with robust construction and user-friendly operation. TM 4010D equipped with digital position display DPA 21 - Machine bed and base made from heavily ribbed special cast iron - High rigidity of the headstock housing due to heavily ribbed GG cast iron - Hardened and ground face spindle ensures exceptional precision and durability - High metal removal rates during roughing allow for finest surface finishes and tight tolerances - Wide range of threads and feeds without the need to change gears in the gear train - Bed guides are hardened and precision-ground - Main spindle with perfect concentricity mounted in precision ball bearings - Mechanical longitudinal feed stop for the carriage with four adjustable eccentrics - Electronic main spindle brake - All controls (electrical) centrally accessible - 4-way longitudinal stop - Quick-change tool post SWH 3 TM 4010D – Digital position display DPA21 - User-friendly membrane keypad, splash-proof, sealed, and glare-free - Increased working accuracy Nsdpfxjd Eaukj Apnodc - Error rate reduced - X-, Y-, Z0-, Z-axes each with 8-digit display - Glass measuring scales Equipment details: Feed gearbox – All gears made of steel, hardened and ground, shafts on needle bearings, all components lubricated in an oil bath Apron – Completely sealed housing with safety device to prevent simultaneous operation of thread cutting and feed mechanisms Tailstock – Hardened and ground quill, generously dimensioned, with scale Prismatic bed – Heavily ribbed cast iron, high rigidity Machine lamp – Complete illumination of work area Main spindle – Perfect running accuracy, high load capacity, mounted in precision taper roller bearings Machine base – Assembled Tool compartment Operator panel – User-friendly membrane keypad, machine lamp, coolant pump, direct drive, 2-speed motor switch, emergency stop pushbutton Coolant tank – Removable, fill level indicator, easy and complete draining and cleaning Control cabinet – Well arranged, 24V DC power supply, all contactors and relays by Schneider or Siemens Chip tray – Hinged, easy chip removal Scope of delivery: - 3-jaw chuck 200 mm - Operating tools - Adapter MK 6-MK 4 - Change gear set Technical data: Length: 1,950 mm Width/Depth: 820 mm Height: 1,530 mm Max. length: Max. width/depth: Max. height: Weight: 500 kg Drive motor power: 2.2 kW Total connected load: 2.3 kW Total current consumption: Electrical voltage: 400 V Phases: 3 phases Current type: AC Mains frequency: 50 Hz Spindle mount: Camlock DIN ISO 702-2 No. 5 Spindle bore/bar capacity diameter: Ø 53 mm Chuck diameter: Chuck actuation of clamping movement: Center height: 200 mm Center distance: 1,000 mm Swing over bed: 400 mm Swing diameter:

Būklė: paruoštas naudoti (naudotas), Deckel SOE Engraving Cutter Grinder Maximum grinding length: 90 mm Maximum grindable angle: 180° Maximum grindable radius: 10 mm Coarse adjustment: 100 mm Nodpfx Aexyv Axspnedc Fine adjustment: 15 mm Swivel range of indexing head carrier: 90° Indexing carriage coarse adjustment: 40 mm Indexing carriage fine adjustment: 12 mm Height from tube guide center to grinding spindle center: 140 mm Wheel size: 100 x 50 x 20 mm You are welcome to arrange an inspection. You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. If you have any questions, please feel free to contact us by phone. The telephone number can be found at the bottom of the item page in the legal information/imprint section. Visit our shop to view our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Setup and electrical connection of the machine/equipment must be carried out and/or checked by a qualified professional. Deviations in technical data as well as errors in the item description may occur and are reserved. Shipping is only available to commercial customers – private customers may collect the machine on-site only.