Graverio šlifavimo staklės

DECKEL S0 (SO)

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1996, Graviravimo šlifavimo staklės Gamintojas: Deckel Modelis: S0 Njdpfox Hx Elox Acpscr Pagaminimo metai: 1996 – patikrinta dirbtuvėse Mašinos Nr.: 26617 Priedai: - Šlifavimo diskas su flange - Naudojimo instrukcija Naudota, parduodama tokios būklės, kokia yra Mašina techniškai atitinka pagaminimo metų lygį.

Būklė: naujas, Gręžimo-frezavimo staklės OPTIMUM OPTImill MB 4 - Demonstracinis įrenginys - Šis pasiūlymas yra įrangos komplektas. Šie gaminiai ir parinktys jau yra įskaičiuoti į kainą: - Gręžimo-frezavimo staklės OPTImill MB 4 Optimum - Staklių pagrindas MSM 3 Optimum - Spaustuvų rinkinys MK 4/ER 32 – M16 Optimum - HSS IMUM kotiniai frezeriai - Preciziškas mašininis veržliaraktis FMS 100 Optimum Njdpou R Tftefx Acpjcr - naujas demonstracinis įrenginys -

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Weiler Matador VS-2 Lead and Feed Screw Lathe Technical Data: >> Year of manufacture: approx. 1970, Machine No. M1012 >> Center height: 140 mm >> Distance between centers: 500 mm >> Spindle speed: 30 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds from 0.010 to 1.184 mm/rev >> Threads possible: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 15 mm >> Weight: approx. 700 kg >> Dimensions: length 1.4 m, height 1.2 m, depth 0.55 m Accessories and Equipment: >> Collet chuck set with 32 collets (set incomplete) with mounting >> 1 three-jaw chuck with 1 set of jaws >> 1 four-jaw chuck with 1 set of jaws Nedpfx Asvv Etvecpocr >> Multifix size A with 2 tool holders >> Change gears >> Bed stop About the Machine: Offered is a used Weiler Matador VS-2 in fully functional condition. Take advantage of the opportunity to inspect this machine under power on site and verify its condition for yourself.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm >> Centre distance: 430 mm >> Speed range: 60 - 3,000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT2 Nedpfxevtp Ede Acpecr >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Equipment and Accessories: >> 1 pc. 3-jaw chuck 125 mm with 2 sets of jaws >> Collet chuck with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electric spindle guard About the Machine: Offered is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides all move very smoothly and evenly. The Weiler also runs quietly at high speeds. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for the production of ground-like surface finishes. Take the opportunity to view this machine under power on-site and see its condition for yourself.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose DIN 4 >> Tailstock: Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev Nodpfjvivmyox Acpjcr >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and Equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm in 1 mm steps, new About the machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All carriages move smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced to a near-ground finish. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Būklė: naudotas, Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Weiler Matador VS2 tekinimo staklė, pagaminta 1992 m., trijų žandikaulių griebtuvas, Multifix, galinis apsauginis skydas nuo drožlių, elektrinė griebtuvo apsauga. Staklės geros, paruoštos naudoti būklės, po susitarimo galima parodyti veikiant. Ncsdpex Sqvgofx Acpjr

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1991, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 280 mm, WEILER MATADOR VS2 Weiler Matador VS2 tekinimo staklės iš itin geros būklės, buvę švietimo įstaigoje, pagamintos 1991 m., originalūs dažai, su Heidenhain skaitmenine indikacija ir priedais. Techninės specifikacijos: * Staklių numeris: 91-102 * Centro aukštis: 140 mm * Atstumas tarp centrų: 500 mm * Apsisukimų dažnis: 15 / 3550 aps./min. * Špindelio angos skersmuo: 36 mm * Špindelio galva DIN 55027 -5 * Atstumiama galva MK 3 * Automatinė eiga nuo 0,012 iki 0,9 mm/aps. * Galimos sriegio rūšys: metriniai, coliniai, moduliniai ir diametriniai * Metrinis sriegio žingsnis: nuo 0,25 iki 12 mm * Svoris apie 700 kg Priedai ir komplektacija: * Heidenhain 3 ašių skaitmeninė indikacija * 3-žandikaulių plieninis griebtuvas * Variklis su stabdžiu * Multifix įrankių laikiklis su 4 laikikliais * Grąžtų galva * Besisukantis centras * Keičiamieji krumpliaračiai * Elektroninė špindelio apsauga * Staklių knyga vokiečių kalba. Nedpfx Ajytd U Rocpocr

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C from Technical School Technical Specifications: >> Year of manufacture: 1992 >> Machine no.: 92 160 3260 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds: 24 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: 0.02 to 0.63 mm/rev >> Threads possible: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Switchable spindle brake Nedpfx Asx Eb A Uscpjcr >> Dimensions (L x H x D): 1.6 m x 1.25 m x 0.7 m Accessories and Features: >> 3-axis digital readout by K&C with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter mode, quick zeroing, counting direction switching >> Collet chuck system with NEW collets from 3 to 26 mm in 1 mm increments >> 160 mm three-jaw chuck (steel jaws) with 1 set of jaws >> Quick-change toolpost with 4 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Coolant system >> Operating manual, spare parts list About the Machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe with toolmaker precision, year 1992, in very good condition. The machine is, of course, fully functional. The carriage system runs very smoothly and evenly. Even at high speeds, the Weiler operates quietly. This newer generation of Weiler lathes is very operator-friendly and delivers ground-like surface finishes. Take the opportunity to view this machine on site under power and see the condition for yourself.