Graviravimo mašinos

DECKEL-MAHO SAUER LASERTEC 40

Sąlyga: geras (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, gręžimo gylis: 1 150 mm, bendras svoris: 12 000 kg, gręžimo skersmuo: 32 mm, Heidenhain iTNC530 CNC control 12-position tool changer Technical specifications: Travels: X-axis longitudinal (table): 1800 mm Z-axis transverse (column): 1700 mm Kdsdpfowcldasx Af Iog W-axis transverse (drilling unit): 1150 mm Y-axis vertical (drilling unit): 1200 mm B-axis (rotary table): 360° A-axis (drilling unit): -25° to +15° Deep drilling area (ELB): Diameter range: 6–32 mm Max. drilling depth: 1150 mm Drive power: 40 kW Approximate machine weight: 12,000 kg Technical data, accessories, and machine description are not binding. For further technical data, refer to the photos.

Sąlyga: labai geros būklės (naudotas), Here we offer a Polychromix Phazir NIR Spectrometer. Portable near-infrared analyzer Model: 1624 Kdsdpfx Afsn Arm To Ijg Specifications: Spectral range: 1600–2400 nm Pixel pitch: 8 nm Optical resolution: 11 nm Stray light

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor B, Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C (NEW) Geometrically overhauled with acceptance protocol for new machine tolerances! Technical Data: - Machine No. 90-1495 - Centre height: 165 mm - Centre distance: 750 mm - Spindle speeds: from 22 to 2800 rpm Kdsdjvambcepfx Af Ijg - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock Morse taper 3 - Feed rates from 0.015 to 0.46 mm/rev - Possible threads: Metric, Imperial, Module and Diametral Pitch - Metric thread pitches from 0.18 to 28 mm - Weight approx. 1100 kg - Spindle brake engageable - Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: - 3-axis digital readout by K&C, new, with 12 months manufacturer warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving function, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal, - Collet chuck system, NEW collets from 3 to 26 mm in 1 mm increments - 160 mm 3-jaw chuck with two sets of jaws, NEW - Multifix quick change toolpost, size A, with 2 new tool holders - Bed stop - Electric chuck guard, NEW - LED machine lamp, NEW - Rear splash guard - Operating manual - Coolant system - Machine feet About the machine: Offered is a Weiler Condor B lead and feed screw lathe, geometrically overhauled and in as-new condition. The guideways have been reground or newly hand-scraped. Supplied with a certified inspection protocol. A very attractive machine with electronic spindle protection. The accessories — collets, chuck, and Multifix — are new. Spindles, nuts, bearings, belts, and wipers have been renewed. You are welcome to inspect this machine under power at our premises and see its condition for yourself.

Sąlyga: naudotas, Gamybos metai: 2006, Technical Details: Maximum bending angle: 75° Working height: 850 mm Operating voltage: 380 V Machine weight approx.: 1.0 t Machine dimensions (LxWxH): 1.9 x 2.6 x 1.0 m Transport dimensions: 2.6 x 1.8 x 1.0 m Single and double bending of reinforcing steel possible. Number of bending formers: 2 units Bending angles: 40°; 60°; 75° Bar diameter: Single bend = Ø 12–50 mm, Double bend = Ø 12–35 mm Operation via control panel with touch screen Bending table: - Ø 480 mm - Rotational speed: 7.5 / 15 rpm - Bending pin hole: Ø 48 mm (16 positions) - Center pin: Ø 50 x 94 mm Counter-holder bars: - 2 units, length = 840 mm - Manual travel adjustment: 100 mm Kdjdsu Ibu Rspfx Af Ieg - 13 holes, size Ø 48 mm Accessories: Bending attachments: 2x Ø 60 mm; 2x Ø 78 mm; 1x Ø 96 mm; 1x Ø 122 mm; 1x Ø 160 mm; 1x Ø 200 mm 1x pin for table 8x counter-holders, various shapes 1x bending tray

Gamybos metai: 1998, Sąlyga: beveik kaip naujas (naudotas), Laser type: Q-switched pulsed solid-state laser Laser medium: Nd:YAG Wavelength: 1064 nm Beam diameter: approx. 1.2 - 1.3 mm after output coupling mirror at TEM00 Beam divergence: 5 mrad multimode, 2 mrad TEM00 Pulse duration (time): CW / 90 ns Max. output power: 65 W (130 W optional) in multimode, 16 W in single mode Kdedpfxod Dhw No Af Ijg Pulse energy: 16 mJ (30 mJ optional) at 3 kHz Operating modes: CW, Q-switched from 0.1 to 100 kHz Beam deflection system: Galvanometer system Line width in mixed mode: approx. 0.12 mm

Sąlyga: naudotas, Gamybos metai: 2015, x eiga: 1.200 mm y eiga: 600 mm z eiga: 675 mm Valdymas: C 620 HSCI FS Stalo dydis: 1.220 x 620 mm Įrankių keitiklis: 40 pozicijų Atstumas tarp stalo ir veleno: 735 mm Ksdpfx Asx Ak Hdef Isdg Sūkių dažnis: 10.000 aps/min Veleno variklis: 18 kW Vidinis aušinimas, slėgis: 30 bar -Elektroninis rankenėlė. -Linijiniai matavimo liniuotės. -Lazeriniai matavimo zondai. -Ruošinio matavimo zondo paruošimas. ZONDAS NEĮEINA.

Gamybos metai: 2006, Sąlyga: paruoštas naudoti (naudotas), A 3-axis precision milling machine DMG Mori is available. Travel X/Y/Z: 200 mm / 200 mm / 190 mm, spindle speed: 40,000 rpm, feed rate: 30 m/min, accuracy: 0.001 mm. Machine dimensions X/Y/Z: approx. 1800 mm / 1550 mm / 1850 mm, weight: approx. 2200 kg, control: Siemens 840D, operating hours: 4979 h, spindle hours: 1041 h. The spindle was fully overhauled in 2023. An on-site inspection is possible. Kjdpfxovi N D So Af Iodg

Sąlyga: naudotas, TECHNICAL DATA - Number of Axes: 5 MILLING SPINDLE - Tool Holder: HSK63 - Spindle Drive Power: 17.5 kW - Spindle Speed: 18,000 rpm LINEAR AXES Ksdpfeup Hwxox Af Ijdg - Travel (X/Y/Z axes): 915 / 500 / 500 mm - Rapid Traverse Speed (X/Y/Z): 30 / 30 / 20 m/min TOOL CHANGER - Number of Tools in Magazine: 28 TABLE - Table Size: Ø 630 mm - Max. Table Load: 500 kg ELECTRICAL SUPPLY - Supply Voltage: 400 V - Total Power Consumption: 26 kVA WEIGHT AND DIMENSIONS - Footprint: 3620 x 3160 mm - Machine Height: 3000 mm - Machine Weight: 7,300 kg MACHINE HOURS - Operating Hours: 50,223 h EQUIPMENT - Control: Heidenhain iTNC 530 - Coolant Tank - Chip Conveyor - Oil Mist Extractor: ELBARON - Coolant Unit: HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece Probing System: Renishaw - Tool Breakage Monitoring: BLUM

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, matavimo diapazonas X ašis: 400 mm, matavimo diapazonas Y ašis: 400 mm, matavimo diapazonas Z ašis: 200 mm, ruošinio svoris (maks.): 25 kg, garantijos trukmė: 12 mėnesiai, įėjimo įtampa: 230 V, paskutinio kapitalinio remonto metai: 2025, Įranga: Tipinė plokštelė prieinama, apšvietimas, dokumentacija / vadovas, Multisensor coordinate measuring center in excellent condition with warranty and guarantee, offering comprehensive services. Regularly maintained. Hexagon Optiv 442 multisensor measuring machine equipped with camera, laser, and Renishaw probing system. • Measuring range (single sensor): 410 x 410 x 200 mm • Dimensions: 1232 x 910 x 1663 mm • Weight: approx. 940 kg • Max. load on glass plate: 30 kg • Accuracies: U1 = 1.9 + L/200; U2 = 2.4 + L/150; U3 = 2.9 + L/100 (L = measuring length in mm) • Max. travel speed per axis: 200 mm/s • Includes camera with 2-stage zoom • Includes laser • Includes LED ring light • Includes Renishaw 6-fold probe changer • Includes Renishaw TP200 probing system • Includes new frame grabber (Eagle) • Includes dual-monitor operation Kedpfxjdyc Uao Af Ijdg • Includes Windows 10 evaluation station • Optional: transport, commissioning, and calibration included on request.

Sąlyga: geras (naudotas), Gamybos metai: 1988, Operating voltage: 380 V Connected load: 7.5 kVA Dimensions: 2725 x 1930 x 1773 mm Machine weight approx. 2500 kg Technical specifications – Main data: - Table surface: 605 x 300 mm - Max. longitudinal table travel (manual): 750 mm - Cross table travel: 340 mm - Grinding height between table and new grinding wheel min/max: 22.5 / 322.5 mm - Standard magnetic chuck size: 600 x 300 mm - Workpiece weight incl. magnet: 420 kg X-axis / Longitudinal travel: - T-slots (quantity x width): 3 x 17 mm - Table feed, hydraulic: 0.3–25 m/min - Travel per handwheel revolution: 47 mm Y-axis / Vertical movement: - Automatic vertical feed – coarse, 12 steps: 0.001–0.03 mm - Automatic vertical feed – fine, 8 steps: 0.001–0.01 mm - Travel per handwheel revolution (x1/x10): 0.1 / 1.0 mm - Scale division on handwheel (x1/x10): 0.001 / 0.1 mm - Spark-out strokes (Ausfeuerhübe): 0–5 - Rapid traverse: 400 mm/min Z-axis / Cross travel: - Automatic intermittent cross feed: 0.5–20 mm - Automatic continuous cross feed / rapid traverse: 0.1–1.0 m/min - Travel per handwheel revolution: 5.0 mm - Scale division on handwheel: 0.02 mm Standard grinding wheel: - Diameter x width: Ø 355x38 (50) mm - Bore: Ø 127 mm - Speed: 1500 rpm Accessories: various grinding wheels Kjdpfsw Dvkaox Af Iodg Documentation included