5 ašių CNC apdirbimo centras

Deckel Maho Dmu70V

Sąlyga: geras (naudotas), Gamybos metai: 1997, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 570035, X ašies eiga: 710 mm, Y ašies eiga: 520 mm, Z ašies eigos atstumas: 520 mm, greitas poslinkis X ašimi: 30 m/min, greitas poslinkis Y ašis: 30 m/min, greitasis eiga Z ašyje: 30 m/min, X ašies padavimo greitis: 10 m/min, Y ašies padavimo greitis: 10 m/min, padavimo greitis Z ašis: 10 m/min, bendras aukštis: 3 300 mm, bendras ilgis: 4 600 mm, bendras plotis: 5 500 mm, stalo plotis: 500 mm, stalo ilgis: 700 mm, bendras svoris: 6 000 kg, veleno greitis (min.): 20 aps./min, veleno greitis (maks.): 12 000 aps./min, ašies variklio galia: 25 000 W, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, Įranga: dokumentacija / vadovas, 5-axis machining center, Manufacturer: DECKEL MAHO, Model: DMU 70 V, Year of manufacture: 1996, Serial No.: 570035, Travel paths (X/Y/Z): 710/520/520 mm, Control: HEIDENHAIN, max. spindle speed: 12,000 rpm, 60-tool automatic tool changer, compact filtration unit INTERLIT SUK200/900, year of manufacture: 1997, capacity: 900 l, filter area: 0.2 m³, chip conveyor, internal coolant supply Hnedpfxjrkz A Ie Af Iog Note: One tool changer is defective.

Sąlyga: geras (naudotas), Gamybos metai: 2000, veikimo valandos: 10 000 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 1 105 mm, tekėjimo skersmuo: 610 mm, veleno greitis (maks.): 3 500 aps./min, veleno skylė: 70 mm, X ašies eiga: 580 mm, Y ašies eiga: 210 mm, Z ašies eigos atstumas: 1 137 mm, tvirtinimo skersmuo: 63 mm, sukimosi greitis (maks.): 6 000 aps./min, įvesties srovės tipas: Oro kondicionierius, Įranga: sūkių greitis be galo kintamas, The machine is in good condition. Major maintenance work in recent years: 30.04.2020 Milling spindle overhaul CHF 35,000 16.07.2021 Software update (Wenk AG) CHF 1,600 20.06.2022 Central lubrication pump replaced CHF 400 (All prices are in CHF) Hsdpfexp Hmaox Af Iong Known defects: ·Error message at startup ·Coolant for internal cooling flows out at the rear side of the milling spindle ·Overload message when the machine is cold and rapid traverse is at 100% ·Over 150 various tool holders ·Spare bushings for the tool magazine ·Spare limit switches for the tool changer position monitoring ·2 pieces 3-jaw chuck, diameter 250 mm (mounted during inspection) ·1 piece 3-jaw chuck, diameter 250 mm ·1 piece 3-jaw chuck, diameter 300 mm ·1 piece 4-jaw chuck, diameter 400 mm ·2 sets hard jaws for external clamping, short version ·1 set hard jaws for external clamping, long version ·Various sets of soft jaws, used ·Replacement filters for the Kowap high-pressure unit (5 pieces in stock, approx. 2 pieces by delivery – 1 filter approx. 20-25 CHF) ·Coolant purification system or oil separator (custom-made) ·Cabinet suitable for the tool magazine, adapted for KM63 holders and numbered with 80 slots ·Specific clamping accessories suitable for KM63 holders, which allow direct clamping of indexable inserts ·Iscar side milling cutter suitable for one holder, D160mm, width 4mm ·Gear cutter suitable for one holder (custom-made – for soft jaws p=1.5mm) ·Cleaning/deburring brush suitable for one holder We can also provide you with leasing and financing offers for the machine. An inspection appointment can be arranged upon request.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2001, veikimo valandos: 27 000 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 710 mm, Y ašies eiga: 520 mm, Z ašies eigos atstumas: 520 mm, veleno greitis (maks.): 18 000 aps./min, įrankių magazino lizdų skaičius: 32, No reserve price – guaranteed sale to the highest bidder! Hedpfxswqgrhj Af Iong TECHNICAL DETAILS X-axis travel: 710 mm Y-axis travel: 520 mm Z-axis travel: 520 mm Number of machining axes: 5 Simultaneous CNC axes: 3 Table clamping surface: 700 mm Workpiece weight capacity: 350 kg Tool holder: HSK A63 Drive power S1 100%: 15 kW Maximum spindle speed: 18,000 rpm Spindle type: vertical Maximum tool diameter: 40 mm Magazine type: chain magazine Number of tool positions: 32 MACHINE DETAILS Overall height: 2,760 mm Total weight: 6,000 kg Required installation length: 2,710 mm Required installation width: 2,750 mm Connected load: 32 kVA Spindle hours: 27,000 h Operating hours: 83,450 h EQUIPMENT - Coolant system - Fully enclosed work area - CE compliant

Sąlyga: naudotas, Gamybos metai: 2006, X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Control unit: MSX 501 Mori Seiki Table clamping surface: 700 x 450 mm Max. table load: 350 kg Number of T-slots: 4 T-slot width: 18 mm T-slot spacing: 100 mm Spindle speed: 12,000 rpm Main spindle drive power: 18.5 / 15 / 11 kW Tool holder: BT 40 Max. torque: 110.5 Nm Front milling spindle bearing diameter: 70 mm Rapid traverse (X/Y/Z): 20,000 mm/min Feed rate: 1 - 20,000 mm/min Fine feed rate: 15 steps / 0 - 1,260 mm/min Magazine capacity: 40 positions Max. tool width: 80 mm Max. tool diameter (adjacent slots empty): 125 mm Max. tool length: 250 mm Max. tool weight: 8 kg Chip-to-chip time: 2.8 sec Tool-to-tool change time: 1.0 sec Total power requirement: 34 kVA Machine weight: approx. 7.2 t Footprint: approx. 2.8 x 3.0 x 2.9 m Vertical machining center MORI SEIKI - NV 4000 DCG - approx. 14,000 operating hours Hsdpfxov Az Uce Af Isng

Sąlyga: geras (naudotas), Gamybos metai: 1994, CNC Spiral-Biegemaschine, Kapazität 50 cm³, min.-max. Wickeldurchmesser 500–3.500 mm. Hsdjiu Acpspfx Af Iong

Sąlyga: naudotas, Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 124, Kaina pagal užklausimą Naudotas CNC vertikalus tekinimo staklės Gamintojas: MORI SEIKI Modelis: VL 55 Pagaminimo metai: 2001 Su CNC valdymu MSC 518, 12 pozicijų revolverine galvute ir drožlių transporteriu Tekinimo ilgis = 653 mm Tekinimo skersmuo = 550 mm X ašis = 350 mm Z ašis = 660 mm Sukimosi greitis iki = 2000 aps./min. Veleno galia = 30 kW Hedpfjwl An Iex Af Iong Svoris apie = 12,5 t

Gamybos metai: 1999, Sąlyga: paruoštas naudoti (naudotas), Travel X/Y/Z: 1050mm/800mm/880mm, B-axis: 360°, table dimensions X/Y: 630mm/630mm, number of pallets: 2, max. workpiece weight: 1500kg, spindle speed: 7000rpm, tool holder: SK50, power: 30kW, tool magazine capacity: 80, max. tool diameter: 135mm/260mm, max. tool weight: 30kg, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6400mm/2600mm/3200mm, weight: approx. 19,700kg, control: Mazatrol 640M PC-Fusion-CNC. Includes 2-station pallet changer for 630mm/630mm pallets. Documentation available. On-site inspection possible. Hnedpfx Asvnd Susf Iog

Gamybos metai: 1990, Sąlyga: geras (naudotas), CNC 4th Axis Manufacturer: NIKKEN Hnodjgabu Ujpfx Af Isg Model: CNC-200, Year: 1990 Including tailstock and base plate.

Sąlyga: labai geros būklės (naudotas), Engel Victory 1350/220 Tech\nClamping Force: 220 tons\nYear of manufacture: 2004\nPlaten size (W x H): 860 x 830 mm\nScrew diameter: 55 mm\nInjection volume: 618 cm³\nControl system: CC 200\nMinimum mold installation height: 250 mm\nMaximum mold installation height: 730 mm Hnsdpfx Afepdrpzj Ijg

Sąlyga: geras (naudotas), Gamybos metai: 2002, HEIDENHAIN TNC 430 control Spindle speed: 20 – 9,000 rpm Hnedowglfxspfx Af Iog Travel paths: X = 500 mm, Y = 400 mm, Z = 400 mm Tool holder: SK 40 Tool changer with 16 stations Rotary table with B and C axis Clamping surface: Ø 700 x 500 mm Max. table load: 200 kg Infrared probe for workpiece measurement