Universalus apdirbimo centras

Deckel Maho DMU 50 eVo linear

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2010, veikimo valandos: 32 498 h, X ašies eiga: 500 mm, Y ašies eiga: 450 mm, Z ašies eigos atstumas: 400 mm, nominali (akivaizdi) galia: 35 kVA, valdiklių gamintojas: Heidenhain iTNC 530, ruošinio plotis (maks.): 500 mm, ruošinio skersmuo (maks.): 630 mm, ruošinio svoris (maks.): 200 kg, bendras aukštis: 2 590 mm, bendras ilgis: 4 780 mm, bendras plotis: 4 410 mm, bendras svoris: 5 900 kg, veleno greitis (min.): 18 000 aps./min, ašies variklio galia: 35 000 W, Year of manufacture: 2010 CNC Control: Heidenhain iTNC 530 Kwodpsyi Dniefx Abrsu Axes Travel X-axis mm: 500 Travel Y-axis mm: 450 Travel Z-axis mm: 400 C-axis indexing degrees: 360º (0.001) B-axis indexing degrees: 0º/108º (0.001) Rapid traverse m/min: 80/50/50 NC Milling/Rotary Table: Pallet dimensions mm: Ø390 Max. workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Max. spindle speed rpm: 18,000 Spindle drive power kW: 35/25 (40% DC/cont) Spindle torque Nm: 130/87 Cooling Coolant supply through spindle bar: 40 Tool System Tool holder: HSK-A 63 Number of tools in magazine: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. tool length mm: 300 Chip-to-chip time sec.: 5 Equipment Chip conveyor Infrared probe Rinsing gun Blow air through spindle center selectable via M-function Signal light Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat exchanger Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Prepared for internal cooling (40/80 bar) RENISHAW probe Automatic door Machine operating hours: Power-on hours: 54,257 Spindle running hours: 32,498 Total power requirement kVA: 48 Base machine: Dimensions / Weight Length mm: 4,780 Width mm: 4,410 Height mm: 2,590 Weight kg: 5,900

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. Both powerful spindles offer a 66 mm bar passage; two turrets each have 12/24 tool stations with driven tools rated at 14 kW and 12,000 rpm. Y-axis available on both upper and lower turrets. The machine is fitted with a 35-bar high-pressure coolant system including a filtration unit and an additional tank. For further information regarding this lathe, please refer to the attached brochure or contact us directly. Kwsdpfx Abjxmhdnorju Equipment: - LPS for left spindle - Reducing tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 cooling unit for coolant – 8000W - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable, automatic parts catcher (pneumatic) - Part remover equipped with a pneumatic gripper for taking out finished workpieces - Pneumatic ejector for sub-spindle with 100 mm adjustable stroke; end position monitored by sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction system, connection flange Ø100 The machine is fitted with a chip conveyor, coolant unit, and tooling package. The machine can be inspected under power and is available immediately. Only operated in single-shift mode. Further information available upon request.

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2005, veikimo valandos: 42 768 h, valdiklių gamintojas: HEIDENHAIN, veleno greitis (maks.): 18 000 aps./min, ašių skaičius: 5, Šis 5 ašių DMG DECKEL MAHO DMU 50 eVo linijinis buvo pagamintas 2005 m. Jame yra HEIDENHAIN valdymas, 40 barų IKZ, 60 įrankių žurnalas ir 18 tūkst. apsukų per minutę suklio greitis. Staklėse yra automatikos galimybės, visiškai pritaikomos įvairiems gaminių formatams ir pozicionavimui. Jei ieškote aukštos kokybės frezavimo galimybių, apsvarstykite mūsų parduodamas DMG DECKEL MAHO DMU 50 eVo linijines stakles. Susisiekite su mumis ir gaukite daugiau informacijos. • Įrankių žurnalas: 60 įrankių • Aušinimo skystis per visą špindelį (IKZ): 40 barų • 2024 m. atliktas kapitalinis suklio remontas • B ir C ašys kapitališkai suremontuotos 2024 m. Papildoma įranga • Automatizavimas (gaminių tvarkymas), laisvai reguliuojamas gaminių formatas ir padėtis • Popieriaus juostinis filtras • "Blum" lazerinis įrankio lūžio aptikimas • Neįtraukta ištraukimo sistema Kodpox Rd Hpsfx Abrowu Technical Specification Taper Size SK 40

Gamybos metai: 2007, Sąlyga: paruoštas naudoti (naudotas), Parduodama CNC 5 ašių frezavimo staklės Deckel Maho (DMG). Judėjimo eiga X/Y/Z: 500mm/420mm/380mm, įrankių vietų: 30, apsukos: 18000aps./min, didžiausias ruošinio svoris: 200kg, stalo skersmuo: 650mm, pozicionavimo tikslumas: +/-0,015mm, greitas perstūmimas: 24m/min. Staklių išmatavimai X/Y/Z: apie 2500mm/3000mm/2500mm, svoris: apie 5000kg, valdymas: Heidenhain MillPlusIT, darbo valandos: 52590h, veleno valandos: 22009h. Kartais sutrinka staklių kodavimo įrenginys. Yra dokumentacija. Galima apžiūra vietoje. Kedpfx Aex Dm D Ujbrjwu

Sąlyga: geras (naudotas), Gamybos metai: 2009, Ref. No.: 10556 Manufacturer: DMG MORI Model: DMC 60 FD Year of manufacture: 2009 Control type: CNC Control system: Siemens 840DSL-721 Location: Halberstadt Country of origin: Germany Kjdpfxoxc Tt Ts Abrswu X travel: 630 mm Y travel: 800 mm Z travel: 850 mm Max. workpiece diameter: 600 mm Max. workpiece weight: 400 kg Spindle speed: 12,000 rpm Tool changer: 60 positions Max. workpiece height: 500 mm Machine weight approx.: 10 t Number of pallets: 2 Motor spindle: 24,000 rpm Additional information: - Internal cooling - B-axis swivel range -5/ +110° - Cooled table support, table bearings and motors - Cooled bearing blocks and ball screw nuts - Cooled linear guides on X/Y/Z axes - Drive power: 100% duty cycle/40% duty cycle 24 kW/35 kW - Chip conveyor - Internal coolant supply - Electronic handwheel - Rotary table turning function - Operating mode 4 - 2 pallets, Ø 630 mm - Pallet changer with rotary function - High-pressure coolant supply 40 bar, 980 litres, paper band filter - Dsc Htetzywvjlwwxokp - Heidenhain touch probe - 3D Quickset Machine can be inspected under power by prior arrangement.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, drožlių transporteris, Deckel Maho DMU 50 evo Linear with Heidenhain TNC 530 Control - Excellent Condition Technical Data: >> Year of manufacture: 2006 >> Manufacturer: Heidenhain, Type: iTNC 530 >> Travels: X500/Y450/Z400 mm >> C axis: 360 degrees >> B axis: 0 degrees to 161.955 degrees Kwsdpfx Abovyr Tdsrju >> Tool holder: HSK A63 >> Max. spindle speed: up to 18,000 rpm >> Feed rate steplessly programmable up to X, Y, Z 20,000 mm/min C and B axes steplessly programmable up to rapid traverse speed >> Rapid traverse Y-/Z- axis: 50 m/min X- axis: 80 m/min (linear drive) B- axis: 40 rpm C- axis: 50 rpm >> Tool magazine: Double gripper, 60 magazine slots >> Table clamping area: Ø 500 x 380 mm T-slot spacing: 63/14H7 >> Table load capacity: 200 kg >> Dimensions and weight (approx.): Machine without control and attachments Depth: 3.0 meters, Width: 2.4 meters, Height: 2.6 meters Weight: approx. 7,000 kg >> Operating voltage: 400 V >> Electronic handwheel: Heidenhain HR 410 >> Power connection: 17 KVA >> Chip conveyor >> Active spindle cooling >> Mist extraction unit >> IKZ (internal coolant supply) 40 bar >> Coolant filtration unit (fleece filter system) >> Spray gun >> Visiport >> Sealing air for measuring system >> Preparation for robotic loading >> 3D probe: Heidenhain TS640 >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and breakage control >> Complete documentation The following work has been carried out: >> Overhauled main spindle >> Complete maintenance: All coolant and pneumatic hoses replaced, new filters, fluids and belts renewed. Scrapers, etc., and complete cleaning performed. >> Geometric inspection (acceptance protocol) About the machine: For sale is a Deckel Maho DMU 50 evo Linear machining center with Heidenhain TNC 530 3D path control. The machine is in very good condition. The main spindle has been overhauled (exchange spindle), completely serviced, and an inspection protocol has been prepared. Take the opportunity to view and test the machine under power on site.

Sąlyga: geras (naudotas), Gamybos metai: 2006, TECHNICAL DATA Main Drive Spindle Speed: Continuously programmable: 18,000 rpm In setup mode: 20 – 800 rpm Working Spindle: Taper: HSK-A63 Tool clamping: Hydraulic Feed Drive Linear motor: X-axis AC servo motors: C, B, Y, Z Feed rate X, Y, Z: Up to 20,000 mm/min Rapid Traverse Y, Z: 50 m/min X: 80 m/min B: 40 rpm C: 50 rpm Measuring System Resolution: C, B, X, Y, Z: 0.001 mm Position tolerance: C, B, X, Y, Z: 0.010 mm Working Area X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: 0° to 161.955° C-axis: n x 360° Tool Changer with Double Gripper Magazine capacity: 120 Kodpou Hkb Refx Abrewu Max. tool diameter with all places filled: 80 mm Max. tool diameter with free adjacent spaces: 130 mm Max. tool length from spindle nose: 300 mm Max. tool weight: 6 kg NC Rotary Table with Swivel Axis C-axis: Clamping surface rotary axis (mm): 500 x 380 mm T-slot spacing / size: 63 / 14 H7 Locating bore: 30 H6 Max. torque: 1491 Nm Max. table rotation: 50 rpm B-axis: Max. swivel torque: 1864 Nm Swivel speed: 40 rpm Swivel range: 0° – 161.955° Input/display increment: 0.001° Weight: 420 kg Max. load: 200 kg Weight: Approx. 6,800 kg Installation weight: Approx. 7,500 kg Dimensions: 4,170 x 3,133 x 2,560 mm SCOPE OF DELIVERY Including (not exhaustive): Deckel Maho DMU 50 Evo CNC machining center Heidenhain iTNC 530 Tool breakage monitoring Blum measuring probe Oil mist separator Fire extinguishing system High-pressure pump and belt filter system Chip conveyor Exact scope of delivery according to photo documentation We do not guarantee the correctness, completeness, or currentness of the information provided.

Sąlyga: naudotas, Gamybos metai: 2013, valdiklių gamintojas: Siemens, valdiklio modelis: 840Dsl, Description: Main Spindle: Technology: Motor spindle Speed: 5,000 rpm Power (max.): 29 kW Torque (max.): 250 Nm Bar capacity: 65 mm Workpiece clamping: Collet chuck, Hainbuch Spanntop nova Kombi Axzug size 65 Counter Spindle: Technology: Motor spindle Kwodpow Tg Adefx Abreu Speed: 7,000 rpm Power (max.): 22 kW Torque (max.): 130 Nm Workpiece clamping: 3-jaw chuck, SMW Autoblok KNCS-N-225-66 Ejector: Pneumatic Z-axis travel: 750 mm Tool Turret I (X/Y/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool speed: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Y/Z: 270/100/750 mm Rapid traverse in X/Y/Z: 24/10/30 m/min Tool Turret II (X/Z): Technology: 12-station turret Tool holder: VDI30 Driven tool speed: 4,000 rpm, 6.7 kW, 25 Nm Travel in X/Z: 205/750 mm Rapid traverse in X/Z: 24/30 m/min Equipment/Accessories: Chip management: Chip conveyor Coolant management: High-pressure coolant pumps, 14 bar Raw material feed: Short bar loader, EMCO LM 1200 Finished parts removal: Workpiece pick-off device (pneumatic) with conveyor belt Oil mist extraction: Mechanical separator, Absolent make Tool holders: Various fixed and driven holders Additional equipment: Spindle chiller unit

Sąlyga: geras (naudotas), Gamybos metai: 2006, Y ašies eiga: 450 mm, Z ašies eigos atstumas: 400 mm, greitas poslinkis X ašimi: 50 000 m/min, greitas poslinkis Y ašis: 50 000 m/min, greitasis eiga Z ašyje: 50 000 m/min, stalo plotis: 380 mm, stalo ilgis: 500 mm, stalo apkrova: 200 kg, tvirtinimo skersmuo: 30 mm, Matavimo zondas TS640 600 l bakas su 40 bar vidine aušinimo sistema (IKZ) Prailgintas drožlių transporteris 30/60 įrankių automatinėje keitiklyje (ATC) Tiesioginės matavimo skalės taip pat B ir C ašyse Oru centruojamas velenas per M-funkciją X ašis: 500 mm Y ašis: 450 mm Z ašis: 400 mm Ksdpfx Abow Rl Igsrowu A ašis: 360° B ašis: 0–108° Stalo ilgis: 500 mm Stalo plotis: 380 mm Stalo apkrova: 200 kg Greitas eiga X ašyje: 50 000 mm/min Greitas eiga Y ašyje: 50 000 mm/min Greitas eiga Z ašyje: 50 000 mm/min Įrankio tvirtinimas: 40 ISO/Bt/Mk Veleno galia: 35 kW Sukimosi greitis: 18 000 aps./min. Įrankių keitiklis: 30 vietų IKZ: 20 bar Valdomų ašių skaičius: 3+2 Drožlių transporteris: yra Aušinimo sistema: yra Ilgis: 3800 mm Plotis: 3200 mm Aukštis: 2800 mm Svoris: 6500 kg

Sąlyga: naudotas, Gamybos metai: 2008, x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Control: HEIDENHAIN Kwodpfx Aewlvi Eebreu Control: MillPlus iT Table clamping surface: Ø 500 x 380 mm B-axis: 0 - 161.955° C-axis: 360° Spindle taper: SK 40 Spindle speeds: 20 - 18,000 rpm Max. spindle power: 35 kW Max. spindle torque: 130 Nm Infinitely variable feeds up to 20,000 mm/min Rapid traverse X/Y/Z axis: 80 / 50 / 50 m/min Rapid traverse B-axis: 40 rpm Rapid traverse C-axis: 50 rpm Number of tool magazine stations: 30 Tool diameter with 2 free positions: 130 mm Tool diameter with full tooling: 80 mm Max. tool length: 300 mm Max. tool weight: 6 kg Internal coolant supply: 40 bar Total power demand: 52 kVA Machine weight: approx. 6 t = 5-axis machining center with 2-axis NC rotary swivel table Accessories: electronic handwheel, chip conveyor, coolant system, belt filter unit

Sąlyga: labai geros būklės (naudotas), Naujiena 2006 m. Brother CNC-B00 valdymo sistema Kedpfxorfxr Uj Abrswu Padėklo keitimo laikas: 3,4 s Padėklo dydis: 600 x 425 mm X ašis: 550 mm Y ašis: 400 mm Z ašis: 415 mm Veleno greitis: 12 000 aps./min. 40 pozicijų automatinis įrankių keitiklis (ATC) BT30

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2007, veikimo valandos: 1 380 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 500 mm, Y ašies eiga: 450 mm, Z ašies eigos atstumas: 350 mm, veleno greitis (maks.): 18 000 aps./min, įrankių magazino lizdų skaičius: 30, B ašies pasukimo kampas (maks.): 108 °, C ašies pasukimo kampas (maks.): 360 °, TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 450 mm Travel Z-axis: 400 mm B-axis: 108° C-axis: 360° Spindle speed range: 18,000 rpm Tool holder: HSK-63-A Tool magazine capacity: 30 Table size: 500 x 380 mm Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min MACHINE DETAILS Control unit: Heidenhain iTNC 530 Machine weight: 6,500 kg Operating hours: 1,380 h Power-on time: 19,803 h EQUIPMENT Kwedpfowu Evtjx Abrou - 5-axis simultaneous machining - Tool changer - NC rotary swivel table - Through-spindle coolant (prepared for 40 bar) - Paper band filter - Chip conveyor - 3D probe: Renishaw preparation (probe not included) - Blum laser tool measurement