Apdirbimo centras - vertikalus

DECKEL MAHO DMF 220 linear

Sąlyga: naudotas, Gamybos metai: 2003, x-travel 2,200 mm y-travel 560 mm z-travel 720 mm Control system: Heidenhain iTNC 530 Spindle speed range - milling: 20 ~ 12,000 rpm Tool holder: SK 40 Spindle drive power: 35 / 25 kW Tool magazine with 100 positions Clamping table size: 2,600 x 600 mm Csdpfx Astumqvea Sorh Rapid traverse X-axis: 100 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Max. tool diameter: 80 mm Max. tool diameter with adjacent pockets free: 130 mm Max. tool length: 300 mm Max. tool weight: 6 kg Max. table load: 2,200 kg Total power requirement: kW Machine weight approx. 12 t Space required approx. 7.0 x 4.2 x 2.7 m Travelling column milling machine DECKEL MAHO - DMF 220 Linear - New spindle installed (April 2024) - Incl. 4th axis 560 mm and tailstock (centre height 350 mm)

Sąlyga: naudotas, CNC Vertical Travelling Column Bed Milling Machine DECKEL MAHO Vertical Machining Centre Type DMF 220 linear Serial No.: 15115223474 Year of manufacture: 2008 CNC 3-D path control Heidenhain iTNC 530 Travel paths X: 2200 mm, Y: 560 mm, Z: 720 mm Table size 2600 x 605 mm Table load capacity 2200 kg Table height above floor 870 mm Distance table to spindle nose max. 752 mm Spindle taper SK 40 (DIN 69871 A) - ISO40 with pull stud DIN 69872 Spindle speed max. 12,000 rpm Spindle drive 35 kW at 40% duty cycle / 25 kW at 100% duty cycle Feed rate 0-20,000 mm/min Rapid traverse X-axis 100 m/min Rapid traverse Y+Z-axis 50 m/min Power connection 400 Volt, 50 Hz, 73 kVA - 30-position tool changer - Internal coolant supply through spindle 40 bar (IKZ) - Air blast with minimum quantity lubrication for tool cooling - Air blast through the spindle centre via M function - 2 rotating safety windows - Operating mode 4, process monitoring during production - Electronic handwheel at mobile operator control station - Separate coolant preparation system, paper belt filter with trough - Chip conveyor to fit under working area - Central grease lubrication system Cjdpfsw Iqt Aex Aa Serh - Operating manual - Operating hours - control on = 75188 h - Operating hours - program run or spindle on = 31632 h - Control with interfaces for data transfer, RS232C + USB Footprint L x W x H 650 x 400 x 280 cm Space required for main machine L x W x H 490 x 395 x 275 cm (with control panel) Space required for chip conveyor L x W x H 550 x 90 x 160 cm (approx. 500 kg) Space required for coolant preparation system L x W x H 180 x 115 x 190 cm (500 kg) Transport dimensions for main machine L x W x H 500 x 248 x 275 cm Additional transport area required for further components 550 x 240 x 250 cm Weight of main machine approx. 12.5 t Good condition

Sąlyga: geras (naudotas), Gamybos metai: 2004, veikimo valandos: 5 012 h, Funkcionalumas: ribota funkcionalumas, mašinos/transporto priemonės numeris: 15115221654, X ašies eiga: 2 200 mm, Y ašies eiga: 560 mm, Z ašies eigos atstumas: 720 mm, veleno greitis (maks.): 6 300 aps./min, įrankių magazino lizdų skaičius: 100, B ašies pasukimo kampas (min.): −90 °, B ašies pasukimo kampas (maks.): 90 °, C ašies pasukimo kampas (maks.): 360 °, Note: Minor relay fault. TECHNICAL DETAILS Travel X-axis: 2,200 mm Travel Y-axis: 560 mm Travel Z-axis: 720 mm Rapid traverse Rapid traverse X-axis: 100 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Feed rate Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Table Table length: 2,600 mm Table width: 560 mm T-slots: 6 x 18H7 Table load capacity: 2,200 kg Spindle Spindle speed: 20 - 6,300 rpm Spindle torque: 350 Nm Spindle power: 14,000 W Tool holder: 40 mm (SK 40 DIN69871 A) Max. tool weight: 6,000 g Tool magazine Magazine positions: 100 Rotary and swivel axes Rotary table diameter (C-axis): 500 mm Max. rotation speed (C-axis): 10 rpm Rotation range (C-axis): 360° (hydraulically clamped) Swivel range of swiveling spindle (B-axis): +90° to -90° Indexing increment swiveling spindle (B-axis): 2.5° Accuracy Position tolerance (X, Y, Z): 0.010 mm Resolution: 0.001 mm Control Control manufacturer: SIEMENS Control model: Sinumerik 840D MACHINE DETAILS Spindle hours: 5,012 h Power-on time: 17,969 h Connected load: 60 kVA Overall length: 6,800 mm Overall width: 3,900 mm Overall height: 2,750 mm Total weight: 16,000 kg Transport dimensions: 2.78 x 4.47 x 2.56 m Transport weight: 14 t EQUIPMENT - Chip conveyor Crodpfx Aaowd N D Tj Sjh - Continuously variable spindle speed - Technical documentation and manual - Hydraulically clamped rotary axis - Swiveling spindle with 2.5° indexing