Vertikalus apdirbimo centras

Deckel Maho DMC 50 V

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, ruošinio svoris (maks.): 750 kg, X ašies eiga: 350 mm, Y ašies eiga: 220 mm, Z ašies eigos atstumas: 220 mm, tuščias svoris: 2 450 kg, Charmilles Robofil 240 Year of manufacture: 2001 Lredpswqdrrofx An Iol Travel distances (X / Y / Z): 350 x 220 x 220 mm Travel distances (U / V): 350 x 220 mm Max. taper angle: +/- 30° at 220 mm height Integrated Collision Protection (ICP) on all 5 axes Max. workpiece dimensions: 1000 x 550 x 220 mm Max. workpiece weight: 750 kg Cutting speed up to 300 mm²/min Best surface finish: Ra 0.22 µm Available wire diameters: 0.10 mm to 0.33 mm Dimensions of the complete unit: 2020 x 2050 x 2000 mm Total weight of the unit: 2450 kg The machine is cleaned, overhauled, and tested by us prior to delivery. We are pleased to offer you commissioning of the machine upon request.

Būklė: naudotas, Gamybos metai: 2014, INDEX C200 CNC tekinimo staklė 3 revolveriai Lsdpfxoxxm Hfo An Ierl 2 velenai Fanuc valdymas: 31i-Model B Ašiniai motorizuoti laikikliai: 6 vnt. Radialiniai motorizuoti laikikliai: 13 vnt. Įrankių laikikliai: 11 vnt. Gręžimo strypo laikikliai: 21 vnt. Kaištis: 1 vnt. Kroviklio įvorės ir movos: Ø51/Ø46/Ø41 Naujos MBL kroviklio įvorės: 2 komplektai 2 optinės liniuotės, renovuotos HEIDENHAIN 1 Balluff portalo rankų dėžė su įvairiais jutikliais, artumo jungikliais ir kabeliais Motorizuotos diržinės pavaros: 6 vnt. Vibracijos slopinimo įvorių komplektas MBL krovikliams Darbo laikas: Įjungtas: 37 946 Hidraulinės valandos: 37 500 Gamybos laikas: 26 500 Su MBL strypų padavėju

Būklė: geras (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 163341, Country of origin: UK Voltage: 400V 3-phase AC 50/60Hz max 58A Dimensions: 200 x 260 x 250 cm Net machine weight: 5010 kg TECHNICAL SPECIFICATIONS Ljdpfxow T Tp Ro An Ijrl Capacities Table dimensions: length 900 mm / depth 410 mm X-axis travel: 560 mm Y-axis travel: 410 mm Z-axis travel: 510 mm Distance spindle nose to table surface: min 150 mm, max 660 mm Distance spindle center to column: 540 mm Maximum table load: 500 kg Spindle Speed: 40 – 12,000 rpm Power (5 min): 18.5 kW Power (10 min): 15 kW Power (30 min): 10 kW Continuous power: 7.5 kW Feed rates Rapid traverse: 36,000 mm/min Cutting feed rate: 1 to 8,000 mm/min Table Dimensions: 900 x 410 mm T-slot size (ISO R299): 18 mm / Number: 3 / Spacing: 125 mm Permissible load: 500 kg Distance floor to tabletop: 780 mm ATC Tool Magazine Number of tools: 30 pcs Tool selection: random access; automatic bi-directional search Tool holder: MAS BT-40 Max tool diameter in magazine: Ø 80 mm (without adjacent tool: Ø 125 mm) Max tool weight: 8 kg Maximum magazine load: 120 kg Max tool length: 350 mm Tool change time: 2.9 sec (chip-to-chip) Lubricant reservoir: 1.8 L Axis lubrication reservoir: 260 cm³ Spindle coolant tank: 16 L Hydraulic pressure tank: 460 cm³ Coolant reservoir: 200 L Compressed air: 0.5 to 0.9 bar Capacity: 200 L/min All technical data is supplied subject to possible error or omission and is provided without guarantee.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, Universal Milling Machine Kunzmann WF 600M with Heidenhain TNC 128 Control – Excellent Condition, CE Compliant! Technical Specifications: Lsdpfx Anewz Eu No Ierl - Year of Manufacture: 2015 | Machine No. 610398 - Clamping surface of milling table: 800 x 425 mm Number of T-slots: 6 T-slot width: 14 H7 T-slot spacing: 63 mm Max. table load: 300 kg - Spindle speed range: 1-4,500 rpm - Infinitely variable feed: 0-2,000 mm/min - Rapid traverse X and Y axes: 5,000 mm/min Z axis: 4,000 mm/min - Travel (X/Y/Z): 600/400/400 mm - Vertical and horizontal quill – SK40 - Hydraulic clamping system - Machine weight: approx. 2,025 kg - Dimensions (L x W x H): approx. 2 x 2 x 2 m - Main drive motor: AC three-phase motor Power at 100% duty cycle Equipment and Accessories: - Heidenhain TNC 128 CNC control - Hydraulic clamping, vertical and horizontal - Automatic central lubrication - Spindle brake - Technical documentation, spare parts lists, operating manual - Coolant system About the Machine: Offered here is a Kunzmann WF 600M universal milling machine equipped with a Heidenhain TNC 128 control unit. The TNC 128 offers numerous dialog-guided cycles with graphical simulation for quick and straightforward data entry, such as various drilling cycles, tapping, hole circles, hole rows, rectangular pockets, rectangular tenons, and surfacing. This universal milling machine is in near-new condition and features an exceptionally user-friendly control system. Additionally, the machine provides hydraulic clamping for both vertical and horizontal operation. Converting from vertical to horizontal is particularly easy thanks to the swiveling vertical head. The guides are lubricated regularly by the centralized lubrication system. Our technicians have thoroughly tested the Kunzmann both mechanically and electrically. Take advantage of the opportunity to inspect and test the Kunzmann under power at our location.

Būklė: geras (naudotas), Gamybos metai: 2002, Wheel diameter - max. 275 mm Lsdpfjtumrpox An Ierl Wheel width 55 mm Module - max. 6 Module - min. 1 Control system 840 C Siemens Total power requirement 100 kW Machine weight approx. 16.7 t Space requirement approx. 5.2 x 2.3 x 2.4 m

Gamybos metai: 2024, būklė: naujas, oris- Extruder MINI ESE 20/25 D Technical Data Screw Diameter [mm]: 20 Screw Length [L/D]: 25 Screw Speed [rpm]: 20-200 rpm Screw Axial Pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency converter Drive Power [kW]: max. 2.5 Reduction Gearbox with integrated thrust bearing Weight [kg]: approx. 160 Dimensions [L x W x H] [mm]: approx. 1050 x 600 x 1590 *) Electrical Connection Values: 3 / N / PE Supply Voltage [V]: 400 at 50 Hz Control Voltage [V]: 230 Temperature Control: Electric mica resistance heating bands Max. Processing Temperature [°C]: 300 Control Cabinet and Control Panel The electrical installation of the extruder is located in the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; the water connection must be provided by the customer. A chiller unit for cooling the water is not included in the offer. Extruder tooling is not included in the scope of supply. Lrodpfx Anshx Elfo Iol

Būklė: naudotas, Gamybos metai: 2010, x eiga 500 mm y eiga 450 mm z eiga 400 mm Valdymas iTNC 530 Heidenhain Pagrindinio veleno apsisukimų diapazonas 20 - 10.000 min⁻¹ Pagrindinio veleno pavaros galia 13 / 9 kW Maks. sukimo momentas 83 / 57 Nm Įrankio tvirtinimas SK 40 DIN 69871 Lredpfsy E Tv Aox An Isl Stalo tvirtinimo paviršius 700 x 500 mm Maks. stalo apkrova 500 kg T-profilio grioveliai 7x 14 x 63 mm Įrankių vietų skaičius 60 padėt. Maks. įrankio svoris 6 kg Maks. įrankio diametras 80 mm Maks. įrankio diametras su laisvomis greta esančiomis vietomis 130 mm Maks. įrankio ilgis 300 mm Įrankio keitimo laikas 1,6 sek Drožlios keitimo laikas 8,0 sek Greitas važiavimas 24 m/min Pasiūlos jėga 4,5 kN Pasiūlos greitis 1 - 24.000 mm/min Bendras energijos poreikis 26 kVA Staklių svoris apie 4,5 t Užimamas plotas apie 4,5 x 3,5 x 2,3 m CNC vertikalioji frezavimo staklės DECKEL MAHO - DMU 50 - 3 ašys - tik apie 8.097 h veleno valandos - Apsaugos paketas nuo elektros tiekimo nutrūkimo - DXF importavimas - įsk. darbo stalą - įsk. įrankių spintą - įsk. SK 40 tvirtinimų spintą - įsk. apie 63x SK 40 įrankių laikiklius

Būklė: naujas, Gamybos metai: 2026, The ZX7045 B1 DRO milling and drilling machine is an advanced tool designed for precise metalworking. It excels in drilling, reaming, and enlarging holes up to 45/40 mm in cast iron, as well as tapping threads up to M12 mm. With a milling capacity of up to 80 mm width and keyway milling up to 22 mm, this machine ensures versatile use. The ZX7045 B1 DRO variant is distinguished by an automatic spindle feed, increasing operational efficiency. Additionally, it is equipped with digital readout for enhanced accuracy, and a cooling system to maintain optimal temperature during machining. This machine is ready for immediate use and available directly from stock. It is ideal for professionals seeking high quality and performance in metalworking. Product Features: - HEAVY, STURDY CAST IRON CONSTRUCTION - AUTOMATIC SPINDLE FEED - MILLING HEAD HEIGHT IS ADJUSTED ON THE SUPPORT, NOT THE COLUMN - ADDITIONAL LIQUID COOLING - MASSIVE CROSS TABLE WITH PRECISELY GROUND SURFACE - DOVETAIL GUIDEWAYS - QUIET OPERATION THANKS TO GROUND GEARS - LEFT AND RIGHT SPINDLE ROTATION - ROTATING HEAD +/- 90° - ADJUSTABLE HEAD HEIGHT - DIGITAL READOUT - Optional base available TECHNICAL SPECIFICATIONS: Lrsdpfx Ansud H H Ue Isl DRILLING CAPACITY IN STEEL: 32 mm DRILLING CAPACITY IN CAST IRON: 45 mm FACE MILLING CUTTER DIAMETER: 80 mm END MILL CUTTER DIAMETER: 28 mm SPINDLE SPEEDS: 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm (6/12) SPINDLE TAPER: MT4 SPINDLE TRAVEL: 125 mm (AUTOMATIC FEED) WORK TABLE DIMENSIONS: 820 mm x 240 mm BASE DIMENSIONS: 580 x 600 mm MAX SPINDLE TO TABLE DISTANCE: 445 mm SPINDLE TO COLUMN DISTANCE: 260 mm TRAVEL X/Y/Z AXIS: 515/175/430 mm QUILL FEED RATE: 0.12; 0.18; 0.25 mm/rev HEAD SWIVEL LEFT/RIGHT: 90° MOTOR POWER: 1.8 kW (2.5 HP) POWER SUPPLY: 400 V WEIGHT: 350 kg Available Accessories: - Drill chuck arbor MK4/B18 - Digital readout - Hand tools - Drill chuck 3-16 mm/B18 - Reducing sleeve MK4/MK3 - Reducing sleeve MK3/MK2 - Operating manual in English

Būklė: naudotas, Gamybos metai: 2005, Apdirbimo matmenys: 3000 x 1600 x 180 mm Aukšto slėgio siurblys 60 AG / 45 kW Modelis E-60 Darbinis slėgis 4 130 BAR Vandens suvartojimas 4,69 litro/min. Programinė įranga: Watercad-CAM Automatinis pjovimo optimizavimas Sandėliavimo vieta: klientas Ledjxgfbqopfx An Isrl

Būklė: geras (naudotas), Gamybos metai: 2000, veikimo valandos: 53 776 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 500 mm, Y ašies eiga: 400 mm, Z ašies eigos atstumas: 380 mm, sukamosios stalo skersmuo: 500 mm, sukimosi greitis (maks.): 18 000 aps./min, For sale: 5-axis simultaneous milling machine by Deckel Maho, model DMU 50 eVolution. The machine is in good condition and ready for immediate use. Technical data: Year of manufacture: 2000 Control system: MillPlus Power-on hours: 53,776 h Spindle hours: 18,512 h X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 380 mm B-axis: 0–180° C-axis: 360° Clamping table diameter: Ø 500 mm Max. table load: 200 kg Spindle taper: SK40 Max. spindle speed: 18,000 rpm Spindle power: approx. 15 kW Tool magazine: 60 stations Dimensions (LxWxH): approx. 3,400 x 2,400 x 2,500 mm Weight: 5,500 kg Transport and loading can be organized Europe-wide for an additional charge, upon request. All prices exclude VAT. Inspection possible by appointment. Please contact us – our team looks forward to assisting you. Lredpfx Anjwxd Agj Iel Trade-in or exchange possible! Machine Purchase/Sales BUYING & SELLING OF PRODUCTION AND METALWORKING MACHINES, ETC. Are you looking for a high-quality, yet affordable metalworking machine for your production? Or do you want to sell your machine? For further information or contact options, please visit our website.