Taškinio suvirinimo aparatas

DALEX PL 63_EH_750

Būklė: naudotas, Gamybos metai: 1970, mašinos/transporto priemonės numeris: 120895, Pressure: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 spm Table size: 715 x 500 mm Fsdpfx Ajfx Hv Hehrogd Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Passage opening in table: 240 mm Passage opening in clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Space requirement approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press with tiltable design via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or underneath (360 x 160 mm), centralized lubrication via hand pump, additional clamping plate (700 x 480 x 850 mm), two-hand operation, foot release configurable, mode selector switch for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Būklė: geras (naudotas), Gamybos metai: 2007, mašinos/transporto priemonės numeris: 05542, Offer 25128 Technical Data: - Rated power at 50% duty cycle: 25 kVA - Maximum welding power: 68 kVA - Throat depth adjustable: 280 to 450 mm - Stroke: 5 to 40 mm - Welding capacity (steel sheet approx.): 3 + 3 mm Fgodpfx Ahswn Emljrjd - Electrode force adjustable up to: 240 daN - Required air pressure: 6 bar - Cooling water flow: 4 l/min - Connection: 400 V - Space requirement approx.: W 800 x H 1700 x D 1050 mm - Weight approx.: 220 kg - Equipped with: - Single-phase control T 90 Mark II - Electric foot switch - Separate cooling water recirculation unit

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, Programmable and automatic machine for the production of sheet metal panels by forming multiple bends on all four sides. Fjdpfew A Nnpsx Ahrsgd

Būklė: labai geros būklės (naudotas), gerklės gylis: 1 100 mm, nominali galia esant 50% darbo ciklui: 96 kVA, trumpasjungio srovė: 31 500 A, įėjimo įtampa: 400 V, aušinimo tipas: vanduo, bendras svoris: 830 kg, Įranga: Tipinė plokštelė prieinama, Spot welding machine type PMS 11-4 G3, three-phase DC version - Specifically designed for welding aluminium sheets - Lightly used, fully checked and cleaned - All functions in working order, ready for demonstration - Rated voltage: 400V/50Hz - Rated power: 96kVA - Welding current: 23kA - Connection cable cross-section: 10mm²/phase - Circuit protection: 63A - Throat depth: 1050mm (!!) - Electrode arm diameter: 60mm - Electrode holder diameter: 30mm - Electrode force: 600daN - Stroke: 65+25mm - Electrode taper: MK2 - MPS 8043/1 control unit by Harms & Wende with current rise and pulse functions – with user manual Fsdpfx Ahjh N Sc Ejrogd - 2-stage foot switch according to safety regulations (UVV) - Main machine switch - Pneumatic maintenance unit - Weight: approx. 830kg - Complete documentation including circuit diagram, compressed air schematic and cooling water circuit available - VAT can be shown separately - Delivery ex stock Dresden approx. 4 days within Germany – export may take longer! On-site commissioning available at extra cost, invoiced according to actual effort. The machine is located in Dresden, near the A17, and can be inspected and demonstrated by appointment.

Būklė: labai geros būklės (naudotas), Rankiniu būdu valdoma, vandeniu aušinama taškinio suvirinimo replė DALEX tipas A 3119 su dvigubo eigos mechanizmu ir trumpos eigos stabdžiu Trumpoji eiga 25 mm – ilgoji eiga 57 mm su elektrodo jėgos jungikliu ir antriniu keitikliu elektros srovės kontrolei Nominali galia esant 50 % darbo ciklui: 8 kVA Antrinė trumpojo jungimo srovė: 9,5 kA Elektrodo jėga: 180 daN Svirtelių atstumas: 120 mm Svirties išnešimas: 250 mm su sinchroniniu suvirinimo valdikliu RS 11-2 Pagrindinis jungiklis, jungiamasis kabelis ir 16 A CEE kištukas Fgjdpfx Ahog Ew H Norsd Platus vandeniu aušinamų elektrodų svirčių asortimentas sandėlyje

Būklė: naudotas, Manufacturer: TRUMPF Fjdpfxs Dv I To Ahregd Model: CS20a Excellent condition

Gamybos metai: 1990, būklė: naudotas, Pressure: 80 t Throat depth: 250 mm Stroke: 5/95 mm Table surface: 805 x 510 mm Fgsdsfn Aqnjpfx Ahrod Distance table/ram at bottom stroke: 400 mm Ram bore diameter: 45 mm Ram adjustment: 100 mm Ram surface: 360 x 300 mm Strokes per minute: 55 spm Total power requirement: 5.5 kW Machine weight approx.: 4 t Space requirement approx.: 0.83 x 1.7 x 2.6 m - Ram weight balance The machine will be partially overhauled at our facility next year (disassembly, inspection, new paint, new wiring, new control cabinet).

Būklė: naujas, Gamybos metai: 2025, Rated output at 50% duty cycle: 35 kVA Short-circuit current: 19 kA Electrode force: 300 daN / single stroke Throat depth: 395 mm Electrode arm spacing, stepless: 140–400 mm Electrode taper: Mk2 --- Welding controller: WS 708 (7-step, 8-program) --- Including additional options: - Foot switch - Main switch --- Fodpfx Aekti Hzjhrsgd 6-month warranty --- Training and commissioning available on request --- Spot welding electrodes + spare parts available from stock

Būklė: nepatikrintas (naudotas), Number of sanding units: 4 pcs Sanding width: 190 mm Max. sanding height: 4–180 mm Weight: 4200 kg Hess Expert 4-Belt Single Wood Sanding Machine Ø Sanding from below/above Ø With 2 offset sanding units each (below and above) Ø Sanding units (below and above) arranged in series according to the planing principle Ø Pre-sanding with coarse grit (calibration) Ø Fine sanding with fine grit (finishing) Ø Central motorized height adjustment of the lower sanding units Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper feed units Ø Oscillating use of sanding belts (during the sanding process) Ø Absolute power connection via 5.5 kW motors and large-dimensioned drive drums Ø Oxide-ceramic sanding shoe for: - precise surface geometry - no need for readjustment - permanent dimensional accuracy - completely maintenance- and wear-free Basic structure: Stable, heavy-duty welded construction made of thick-walled rectangular profiles with additional, statically calculated reinforcements for optimal vibration damping. Offset sanding units with large-scale belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust, with sealing brushes and integrated sanding belt air-blast system to extend sanding belt service life. Sanding units made from heavy steel plate design as a basis for vibration-damped, smooth belt running. Absolutely backlash-free guides using ball linear sets made from hardened and ground shafts. Height adjustment of sanding units via hardened and ground special linear guides and preloaded guide carriages. Lasting precision due to dust and dirt protection of the ball linear sets and guide carriages. Fgedpfx Ast Tqy Eshred Large-diameter pre-sanding rollers serve as contact rollers. Contact rollers and sanding shoes are optimally matched to the sanding belt grit load. The large-dimensioned drive drums guarantee full transmission of the sanding motors’ 5.5 kW output to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation. This enables maximum stock removal. Automatic machine stop trigger in the event of belt breakage. Optical indicator at the control panel and machine warning beacon. Finishing sanding shoes are completely maintenance- and wear-free, made from oxide-ceramic for optimal heat dissipation. Sanding belt tension by appropriately dimensioned pressure springs. Sanding belt release for belt changes using a pneumatic system for sensitive, distortion-free installation of new belts. Upper sanding unit and brushing device are centrally motorized, height-adjustable with digital display at the control panel for motorized sanding thickness adjustment. Integrated brushing and finishing device for improved surface finish, built into the main machine. Two vertically-aligned special brush rollers, 150 mm diameter, operating in the same direction as the feed. Separate height adjustment of the brush rollers using precise slide guides for wear compensation. Additional conveyor roller for removing or further transporting the workpiece out of the sanding machine, coupled with the transport belt. Wood guide at entry for hard, double-sided...

Būklė: naujas, Table diameter: 780 mm Table load capacity: 1.0 t Swivel range: 0 - 135 degrees Rotational speed: 0.15 - 1.5 rpm Table height adjustment: from 780 to 1560 mm Torque at faceplate: 1000 Nm Welding current: 500 amperes Fodpfofv Ay Ssx Ahrsgd Features • Self-locking gearbox; no overtravel or runback with eccentric loads • Hydraulic height adjustment allows for nearly unlimited positioning • Electronic quality components from Schneider, Siemens, and Delta • Italian hydraulic components • Frequency-controlled, stepless turntable speed adjustment • High stability due to heavy-duty, compact construction • CE certificate • Excellent price-performance ratio • Delivered as standard version with remote control and dual foot pedal • 3-year warranty (see warranty conditions)